FCC ID: 2ABC5-E0002 Android Tablet

ModelWF1022T 10.1 /11.6 INTERACTIVE DIGITAL SIGNAGE User Manual 10.1 /11.6 Important Notices Copyright Information Package Contents Please make sure all of the following are present when you unpack your Features All intellectual property rights in this publication are owned by and protected by INTERACTIVE DIGITAL SIGNAGE 10.1" Exterior Components 11.6" Exterior Components 1 29.00mm 255.00mm 218.00mm 1 289.10mm 256.70mm 30.50mm applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with CE and FCC regulations. 1)Do not push objects into holes and ventilation slots. Do not expose this product to moisture or place any objects fil ed with liquids on or near the product. Do not place a naked flame sou ce, such as lighted candles, on or near this product. Do not store or operate the device in environments where the temperature is above 50 Do not intentionally hit the device or place heavy or sharp objects on the device. Only use accessories specified by the manu acturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualified se vice agent to perform adjustments or repairs. degrees celsius or below -10 degrees celsius. Power adapter User manual INTERACTIVE DIGITAL SIGNAGE 10.1 /11.6 INTERACTIVE DIGITAL SIGNAGE User Manual 10.1"LCD IPS panel/11.6"LCD panel 1.01Resolution (1280*800)/11.6Resolution1920*1080 Quad core cortex A17,1.8G,RK3288 RAM 2GB Internal memory 16GB Android 5.1/8.1 10-Point capacitive touch 2.0M/P,Front camera Bluetooth 4.0 WiFi 802.11b/g/n RJ45 ethernet with POE SD card,support up to 32GB Serial port USB Host*2 Micro USB OTG 3.5mm earphone +micphone HDMI output Battery:5000mah/3.7V(Optional) 2*1.5W speaker VESA75x75mm Adapter:12V/1.5A 2 4 6 8 10 3 5 7 9 18 18 2 4 6 8 10 electronic equipment This symbol on the product or in the instructions means that your electrical and should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product. 3 5 7 9 16 16 75.00mm

. 7 5 0 0 m m VESA:75*75mm 75.00mm 7 5

. 0 0 m m 17 11 13 15 12 14 16 17 11 12 13 14 15 Function Camera SD Card USB 2.0 host USB 2.0 host Serial port RJ45-with POE No 1 2 3 4 5 6 7 8 Micro USB OTG 3.5mm audio jack with micphone No 9 10 11 12 13/14 15/16 17 18 Function HDMI output DC in power supply port Power button Home button Bright+/Bright-button Vol+/Vol-button kensington Lock Speaker Function Camera SD Card USB 2.0 host USB 2.0 host Serial port RJ45-with POE Micro USB OTG No 1 2 3 4 5 6 7 8 3.5mm audio jack with micphone No 9 10 11 12 15 16 17 13/14 Function HDMI output DC in power supply port Power button Home button Vol+/Vol- button kensington Lock Speaker VESA:75*75mm m m 0 0

. 2 7 1 m m 0 5

. 6 3 1 m m 0 0

. 2 7 1 m m 0 5

. 6 3 1 m m 0 8

. 6 8 1 m m 7 4

. 4 4 1 m m 0 8

. 6 8 1 m m 7 4

. 4 4 1

. 10.1"

11.6"

1 29.00mm 255.00mm 218.00mm 1 289.10mm 256.70mm 30.50mm

, 10.1"(1280*800)/11.6"(1920*1080) 4K

,Cortex A17,1.8G,RK3288 2GB 16GB 5.1/8.1 10 2.0M Wifi 802.11b/g/n 4.0

(USB) Micro USB OTG USB host*2 HDMI SD card VESA:75x75mm 3.5mm

:5000MAH/3.7V (

: 12V/1.5A RJ45 (POE 10.1 /11.6 2 4 6 8 10 3 5 7 9 18 18 2 4 6 8 10 3 5 7 9 16 16 75.00mm 7 5

. 0 0 m m VESA:75*75mm 75.00mm

. 7 5 0 0 m m 17 11 13 15 12 14 16 17 11 12 13 14 15 SD USB 2.0 host USB 2.0 host RJ45POE) Micro USB OTG 1 2 3 4 5 6 7 8 9 10 11 12 17 18 13/14 15/16 HDMI

SD USB 2.0 host USB 2.0 host RJ45POE) Micro USB OTG 1 2 3 4 5 6 7 8 9 10 11 12 15 16 17 HDMI VESA:75*75mm 13/14

3.5mm 3.5mm SIZE:130x185MM Material: 80g writing paper, black and white printing, double-sided printing, folding FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Product Name: Android Tablet Model No.: WF1022T FCC ID: 2ABC5-E0002 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Declare that the following product(s):

Product Name: Android Tablet Model No.: WF1022T, WF8382T, WF1172T, WF1332T, WF1342T, WF1412T, WF1562T, WF1522T, WF1732T, WF1852T, NXST19, NXST22, WF2152T, WF2105T, WF2132T, WF2402T, WF2702T, WF3202T, WF4302T, WF5502T FCC ID: 2ABC5-E0002 Utilize the identical circuit design, PCB layout, shielding and interface with (WF3203T), only the appearance color different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Yonghong Li Position: Manager Date of issue: 2020-05-19 Shenzhen, China Location

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ABC5-E0002 Date: 2020/04/27 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC Software Configuration Control Declaration In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yonghong Li Title: Manager

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Letter of Authorization Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Building 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China Product Name: Android Tablet Model Number(s): WF1022T, WF8382T, WF1172T, WF1332T, WF1342T, WF1412T, WF1562T, WF1522T, WF1732T, WF1852T, NXST19, NXST22, WF2152T, WF2105T, WF2132T, WF2402T, WF2702T, WF3202T, WF4302T, WF5502T Product Description: Android Tablet We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Yonghong Li Title:

Manager Date: 19/05/2020 Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.