FCC ID: 2ABC5-E0013 Android Tablet

Important Notices Copyright Information Package Contents Please make sure all of the following are present when you unpack your All intellectual property rights in this publication are owned by and protected by MEDICAL INDUSTRY DIGITAL SIGNAGE Android Tablet WH1333T applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete or otherwise, and on express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their MEDICAL INDUSTRY DIGITAL SIGNAGE respective holders. 1)Do not push objects into holes and ventilation slots. the product. Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. 13.3MEDICAL INDUSTRY DIGITAL SIGNAGE User Manual Do not intentionally hit the device or place heavy or sharp objects on the device. Power adapter User manual User Manual perform adjustments or repairs. Keep the device away from benzene, diluents, and other chemicals. Features LCD IPS panel 13.3"resolution1920*1080 Quad core cortex A17,1.8G RAM 2GB Internal memory 16GB Android 5.1/8.1 10-Point capacitive touch 2.0M/P,front camera Face recognition front camera (optional) Support NFC card reader (optional) Bluetooth 4.0 WiFi 802.11b/g/n RJ45 ethernet with POE Serial port Microphone Micro USB OTG 2*2W Speaker VESA:100*100mm Adapter:12V/2A Exterior Components 337.32mm 295.3mm 1 3 2 4 26.6mm 6 8 7 9 m m 8

. 6 6 1 m m 6 2

. 8 2 2 10 5 100mm m m 0 0 1 11 12 13 14 15 16 No Function No Function 1 2 3 4 5 6 7 8 Camera Light sensor Shield for camera NFC card reader Home 3.5mm earphone with Mic Power Volume +

9 10 11 12 13 14 15 16 Volume -

Mic RJ45-with POE 3.3V/GND GND/TX/RX DC in power supply port VESA:100*100mm Speaker This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product. FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. SIZE:130x185MM 80G

Label Location:

Product Name: Android Tablet Model No.: WH1333T FCC: 2ABC5-E0013 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Agent Authorization Letter

(2021-11-16) RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, authorize Micom Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This agreement expires one year from the current date. Sincerely, Yonghong Li/Manager Company Name: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Baoan, Shenzhen, China.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Baoan, Shenzhen, China. Declare that the following product(s):

Product Name: Android Tablet Model No.: WH1333T, WH1013T, WH1513T, WH1343T Utilize the identical circuit design, PCB layout, shielding and interface with (WH1333T), only the model name and appearance different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Yonghong Li Position: Manager Date of issue: 2021-11-16

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ABC5-E0013 Date: 2021-11-16 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yonghong Li Title: Manager

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. FCC Software Configuration Control Declaration Date: November 16, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Android Tablet/ WH1333T, WH1013T, WH1513T, WH1343T Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Yonghong Li Date: 2021-11-16 Title: Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1