FCC ID: 2ABC5-E0014 Android Tablet

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Label Location:

Product Name: Android Tablet Model No.: WA1383T FCC: 2ABC5-E0014 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration on Model Differences We, SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Baoan, Shenzhen, China Declare that the following product(s):

FCC ID: 2ABC5-E0014 Product Name: Android Tablet Model No.: WA1383T, WA1583T, WA1382T, WA1582T Utilize the identical circuit design, PCB layout, shielding and interface with (WA1383T), only the model name and appearance different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Yonghong Li Position: Head of engineer Date of issue: 2022-01-07

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ABC5-E0014 Date: 2022-01-07 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yonghong Li Title: Head of engineer

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Letter of Authorization Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Address: Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Baoan, Shenzhen, China Product Name: Android Tablet Model Number(s): WA1383T, WA1583T, WA1382T, WA1582T Product Description: Android Tablet We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-01-07 Name:

Yonghong Li Title:

Head of engineer Company: SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. FCC Software Configuration Control Declaration Date: January 7, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Android Tablet/ WA1383T, WA1583T, WA1382T, WA1582T Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Yonghong Li Date: 2022-01-07 Title: Head of engineer Signature of applicant FCC Software Configuration Control Declaration Rev1.1