FCC ID: 2ABC5-E0018 Android Tablet

or otherwise, and on express understanding that shall have no liability whatsoever to Meeting room interactive digital signage Important Notices Copyright Information All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by . Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate,or complete other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. the product. 1)Do not push objects into holes and ventilation slots. Do not expose this product to moisture or place any objects filled with liquids on or near Do not place a naked flame source, such as lighted candles, on or near this product. Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius. Do not intentionally hit the device or place heavy or sharp objects on the device. Only use accessories specified by the manufacturer. Keep the device away from benzene, diluents, and other chemicals. Do not attempt to repair this product yourself. Always use a qualified sevice agent to perform adjustments or repairs. MEETING ROOM INTERACTIVE DIGITAL SIGNAGE 10.1" , 13.3" ,15.6"

User Manual Package Contents Please make sure all of the following are present when you unpack your meeting room interactive digital signage. Introducing the Meeting room interactive digital signage 10.1" , 13.3" , 15.6"

10.1" Exterior Components 1 273,7mm 217,4mm LCD panel 10.1" Resolution:1280*800 , 13.3 15.6" Resolution:1920*1080 RK3288 Quad core cortex A17 / RK3399 Dual-core A72+quad-core A53 RK3566/3568 Quad core cortex A55 RAM 2GB(RK3288) / Optional 4GB (RK3399/3566/3568 ) Internal memory 16GBRK3288) / Optional 32GB/64GBRK3399/3566/3568 Android 5.1/8.1/10.0(RK3288) / Android 7.1/9.0/10.0(RK3399) / Android 11(RK3566/3568) 10-Point capacitive touch Wide-angle camera2.0M/P WiFi 802.11 a/b/g/n/ac(RK3288/3399) , WiFi 802.11b/g/n(RK3566/3568) Ethernet interface ( POE function standard IEEE802.3at,POE+,class 4 25.5W ) Power adapter Bracket/ Screw User manual MEETING ROOM INTERACTIVE DIGITAL SIGNAGE 10.1" , 13.3" ,15.6"

User Manual Bluetooth 4.2 USB for serial (RS232 Level RK3288/3399) USB for serial (TTL Level RK3566/3568) USB 2.0 host (RK3288) USB 3.0 host (RK3399/3566/3568) 3.5mm earphone + Microphone Micro USB OTG SD card ,Max support to 64GB Microphone 2*2W Speaker LED light bar RGB

*If required, please ask for detailed specifications. No Function No Function m m 4 6 3 1

, m m 7 9 8 1

, 2 4 6 8 3 5 7 9 10 11 12 1 2 3 4 5 Camera SD Card slot 3.5mm audio jack USB 2.0 host(RK3288) USB 3.0 host(RK3399/3566/3568) USB for serial (RS232 Level) RK3288/3399 USB for serial(TTL format) RK3566/3568 6 7 8 9 10 11 12 Recovery key Ethernet with PoE Micro USB OTG DC in power supply port Speaker VESA 75*75MM Power button 13.3" Exterior Components 15.6" Exterior Components Installation instructions FCC STATEMENT :

1 348,56mm 294,76mm 1 401,81mm 345,1mm This device complies with Part 15 of the FCC Rules. Operation is subject to the following There are separate collection systems for recycling in your country. For more information, This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. please contact the local authority or your retailer where you purchased the product. m m 4 2

, 6 6 1 m m 4 7

, 3 2 2 m m 4 9 1 m m 1 9

, 2 5 2 2 4 6 8 3 5 7 9 2 4 6 8 3 5 7 9 10 11 12 10 11 12 No Function No Function No Function No Function 1 2 3 4 5 Camera SD Card slot 3.5mm audio jack USB 2.0 host(RK3288) USB 3.0 host(RK3399/3566/3568) USB for serial (RS232 Level) RK3288/3399 USB for serial(TTL format) RK3566/3568 6 7 8 9 10 11 12 Recovery key Ethernet with PoE Micro USB OTG DC in power supply port Speaker VESA 75*75MM Power button 1 2 3 4 5 Camera SD Card slot 3.5mm audio jack USB 2.0 host(RK3288) USB 3.0 host(RK3399/3566/3568) USB for serial (RS232 Level) RK3288/3399 USB for serial(TTL format) RK3566/3568 6 7 8 9 10 11 12 DC in power supply port Recovery key Ethernet with PoE Micro USB OTG Speaker VESA 100*100MM Power button SIZE:130x185MM 80G 1 3 5 2 4 6 two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver measures:

is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Label Location On EUT Label Product Name: Android Tablet Model No.: WA1018T FCC ID: 2ABC5-E0018 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: WA1018T, WA1028T, WA1038T, WF1038T, WA1048T, WA1058T, WA1338T, WA1388T, WA1348T, WA1548T, WA1588T, WA1568T FCC ID : 2ABC5-E0018 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

FPC antenna 1.5 dBi BLE: 2402-2480MHz WiFi 2.4G: 2412-2462MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

City:

ZIP / Postal code:

Country:

Place:

Signature:

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao'an, Shenzhen, China. Shenzhen

China Date: 5/17/2022 version01