FCC ID: 2ALCN-M2MAX Professional Speakerphone

Model No:OfficeCore M2 Max, OfficeCore M2 Max 330, OfficeCore M2 Max 260

FCC ID:2ALCN-M2MAX

IC:23496-M2MAX

The device has been evaluated to meet general RF exposure requirement, The

device can be used in portable exposure condition without restriction.

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modifications or changes to this equipment. Such modifications or

changes could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

‐ Reorient or relocate the receiving antenna.

‐ Increase the separation between the equipment and receiver.

‐Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

‐Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-exempt RSS-247 standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre le fonctionnement.

1. Label Material: Copper plate paper Color: silver text on a black background 2. Label location

SHENZHEN EMEET TECHNOLOGY CO., LTD. Date:2020.12.22 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID:2ALCN-M2MAX To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, SHENZHEN EMEET TECHNOLOGY CO., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality till date max time 180 days from grant date) as outlined in Public Notice DA04-1705. This provision will give SHENZHEN EMEET TECHNOLOGY CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit PERMANENT SHORT-TERM 1 2 3 4 5 6 7 8 Description Block Diagram Operational Description Schematics BOM External Photos Internal Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory:

Contact name:Nick Ni Title:Manager Tel:18018708367 Email:nsk@emeet.ai Company name: SHENZHEN EMEET TECHNOLOGY CO., LTD.

SHENZHEN EMEET TECHNOLOGY CO., LTD. Model difference Declaration Letter Date:2021.01.04 Hereby, we, <SHENZHEN EMEET TECHNOLOGY CO., LTD.>, declare that for model number:OfficeCore M2 Max, with model number:OfficeCore M2 Max 330 OfficeCore M2 Max 260 have the same hardware and software, only different in model No., all parameters remain the same. Please be noticed. Signatory Company Contact name:Nick Ni name:SHENZHEN EMEET TECHNOLOGY CO., LTD. Address:Unit 2C, Building A6, Guangming Science Park, Guanguang Road 3009, Guangming District, Shenzhen, China

SHENZHEN EMEET TECHNOLOGY CO., LTD. Date: 2020.12.22 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The SHENZHEN EMEET TECHNOLOGY CO., LTD., the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communicati ons Technology Co., Lt d., to act on the behalf of the SHENZHEN EMEET TECHNOLOGY CO., LTD. solely in matters relating to the application for an FCC equipment authorization for FCC ID:2ALCN-M2MAX including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the SHENZHEN EMEET TECHNOLOGY CO., LTD. in connection with the Application shall have the same effect as acts of the SHENZHEN EMEET TECHNOLOGY CO., LTD. SHENZHEN EMEET TECHNOLOGY CO., LTD. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Nick Ni Title:Manager Tel:18018708367 Email:nsk@emeet.ai Company name: SHENZHEN EMEET TECHNOLOGY CO., LTD.

SHENZHEN EMEET TECHNOLOGY CO., LTD. Suppliers Declaration Of Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 :

Product Name:Professional Speakerphone Brand Nam:eMeet Report Number:SZ20120190E01 Model Number:OfficeCore M2 Max, OfficeCore M2 Max 330, OfficeCore M2 Max 260 Its herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. The following importer / responsible party in United States:

Not Available at Certification Stage Company Name: NA Company Address: NA Telephone:NA Fax: NA Person is responsible for marking this declaration:

Nick Ni ____________________________________ Name (Full name ) Manager ______________________________________ Position / Title ____________________________________ Legal Signature 2021.01.15 ______________________________________ Date