FCC ID: 2AP2N-UPTM 5 in 1 Magnetic Wireless Power Bank Station

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

ET LIN QO UNE QOT CTCL 00 UC OF 02 Of OF 0G 09 OL 08 OG NL OF Oz Of OF OS O9 OZ OB 06)))7 OF

=k y

=e, oz o oy os 09 oz o9 06000, oz o Ol EOmumicnen f atunturtiutian Huy ltinnlTlinali wun luli

October 17, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AP2N-UPTM Product Name: 5 in 1 Magnetic Wireless Power Bank Station Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signatory Name Position Company Name Address Tel Fax Email Date: October 17, 2023 Zhang Yi Deputy General Manager Shenzhen Esorun Technology Co., LTD Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen, China 0086-0755-23696752

zy@esorun.net

Shenzhen Esorun Technology Co., LTD Covered Equipment Certification Attestation Letter 10/17/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AP2N-UPTM Shenzhen Esorun Technology Co., LTD. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Shenzhen Esorun Technology Co., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Zhang Yi Title: General manager Company Name: Shenzhen Esorun Technology Co., LTD Date: 10/17/2023

Differences Description We Shenzhen Esorun Technology Co., LTD state:

FCC ID: 2AP2N-UPTM Product name: 5 in 1 Magnetic Wireless Power Bank Station Model: StandUP TM10000, StandUP TM20000 All models the function, software and electric circuit are the same, only to different model names. Signature:

Date: October 17, 2023 Signatory Name Position Company Name Address Tel Fax Email Zhang Yi Deputy General Manager Shenzhen Esorun Technology Co., LTD Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen, China 0086-0755-23696752

zy@esorun.net

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6875642.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case SHENZHEN ESORUN TECHNOLOGY CO., LTD U.S. Agent Designation for Service of Process -

Certification Attestation Letter 10/17/2023 ATTN.: Reviewing Engineer FCC ID: 2AP2N-UPTM FRN: 0027580935 Per section 2.911(d)(7) of the FCC rules, SHENZHEN ESORUN TECHNOLOGY CO., LTD certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights, California, 91748 United States of America Agent contact name/Title : Benjamin. Smith/Vice President Agent Email Address: sales@jocinc.org/calvinsui001@gmail.com Tel No.: +1(626) 341 3408 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed (if different to Applicant):

Signed:

Signed:

Printed name: Zhang Yi Title: General Manager Company Name: SHENZHEN ESORUN TECHNOLOGY CO., LTD Company Name: JOC Australia Inc Date: 10/17/2023 Printed name: Benjamin. Smith Title: Vice President Date: 10/19/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.