底 4
面 1
When your wireless power bank works improperly
I.Make sure there
is no any clutters
on the wireless
power bank.
2.When the wireless
power bank is over-heating,
take your mobile
device away from your wireless power bank, and the power bank
will stop charging automatically
when over-heating.
Please try
charging again when the wireless power bank cooling down.
Remarks
It's normal that this charger and your smart phone will be hot
under operating conditions,
and it may be more hotter when
charging and using
at the same time (such as playing music)
正
��
No washing
No metal objects
on the surface No knocking
User Manual
In the box:
勹 立
User manual x 1 Wireless
Product Diagram
Wireless Charging Area
power bank X 1 Micro-usb
charging
cable X 1
11 气*
l `
,一1·、
厂 一一
- Magnet
,
I
I 、 , �--,
-一一 -Switch
I
Power Rate Indicator
Wireless Charging Status Indicator
Note:
Thank you for your acquisition
compatible
510/510 edge, 520 Series,
XR,iPhone
12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max.
with all Qi devices
Note 20 Series,
XS, iPhoneXS
of this compact power bank
wireless
like Samsung 57/57 edge, 58/58 edge,
59/59 edge,
iPhone 8/8 Plus, iPhone X, iPhone
charger,
MAX, iPhone 11, iPhone 11 Pro, iPhone 11 Pro MAX ,iPhone
CE:FC必HsO_冗 Made in China
For optimum performance
product.
using this
and safety, please read this manual carefull
y before
』
u
。
s
tupnB
ce
tu
p
USBOutput
_
l
I
I
.
'
TYp
,
Specifications:
Capacity:
SOOOmAh
Micro B Input: 5V/2A
Type-C Input: 5V/2A
Transmission
�6mm
Distance:
USB Output: 5V/2A
Output: 5V/1A
Wireless
Efficiency:
Charging
Product size: 97.Sx 63.8 x 17 mm
�75%
Wireless
Charging
How to Use
Switch
Use of switches
Press the switch once to turn on the product,
will light up. Then it is in
the battery
the standby state and other devices can be
charged.In
the power on state, and hold the
indicator
power button for 5 seconds to turn off the power.
Tips: In standby state, if you do not perform other
operations,
shut down after
about 20 seconds.
If you need to use it again, please
press the switch again.
it will automatically
反
n
.
.
,
曹
'
Please fit the
product with the
iPhone, it will charge your iPhone
via the built-in
magnetic wireless
to be SW.
back of your
automatically
Max
charging,
..
In
` 尸
When the product is out of power or low battery,
then you need to charge the product.
the standard USB charging
connector
A into a 5V/2A charging
household
You can use
cable with Micro USB
and plug the USB
device such as a car charger,
etc. to charge the product.
to connect this product,
appliances,
r
Indicato
Power Rate Indicator
#
The battery
indicator
is steady blue.
Charging
.,刀1TIIIIII IIII Ill 111 llll lllllill吓
= c=, 亡玉 , Output.
-
l.lnsert
the USB charging
cable USB A end into
-/ 2.Plug the other end of the cable into a terminal
such as a mobile phone.
3.Press the switch button and the power is
discharged
mobile phone.
to charge the terminal
such as a
Wireless Charging Status Indicator
charging.
Green light on, wireless
Red light on, wireless
Red light and the green light flashes
alternately,
is abnormal
is standby.
charging
wireless
charging
Out
心 口口四/
SmartPhooes
Tablettes
Gam,Boy GoPm E-Clgac ette
2
MagSOOOW-中性说明书
20201226
李志敏
品名:
版本:
制作:
料= ·
亏 ·
3
规格: 128g双铜黑白双面印刷对折
尺寸:90xl40
mm
10.0105.072
� ·ag 5000
i12sgx对同嘿白双面印刷砃 折lR寸:90*140mm
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.