all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 1.77 MiB | ||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report |
1 2 3 | User Manual | Users Manual | 1.77 MiB |
USERS MANUAL DMR Mobile Radio EM8100 VHF Contents Important Information RF Energy Exposure Information Operation Safety Recommendations Radio Saftety Information and RF Radiation Information Disabled Frequency Packing List Before Use Ready to Use Product Controls LED Iindicator Status Icons Functions and Operations Operation Mode Product Information Display Time and Date Setting Alert Tone Vibration Backlight Menu Reset Programmable Keypad High Noise Reduction Time-out-Timer(TOT) GPS Positioning DMR Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call DMR Public Network Call DMR-MPT Call Contacts Message Status Message Call Logs Redail List and Callback List Vehicle Inquiry ID Inquiry Status Filing Roaming Scan 3 4 5 8 8 8 9 9 10 12 12 13 13 13 13 13 13 13 13 14 14 14 14 15 15 18 20 20 20 20 20 20 21 21 22 23 23 23 24 24 25 25 25 1 Contents MPT Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call MPT Pubic Network Call MPT-DMR Call Emergency Warranty Receiving and Responding to a Call Late Access Call Logs Redail and Callback List Manual Input to Temporary Group Scan Digital Conventional Functions and Operations Private Call,Group Call and All Call Emergency Call Message Call Logs Zone 2 26 26 28 30 30 30 30 30 30 31 31 31 31 32 32 33 33 34 34 34 35 36 36 Analog Conventional Functions and Operations DMO and RMO Mode Squelch level Optional Accessories Troubleshooting Warranty and Maintains Scope of Warranty Warranty Contents Non of Warranty Disclaimer Warranty Card 37 37 37 38 39 40 40 40 40 41 42 Important Information Note:
Ic Note : Cet Appareil Est Conforme La Partie 15 Des Rglements De La Fcc Et Aux Normes Rss De Lindustrie Du Canada. Son Fonctionnement Est Soumis Aux Deux Conditions Suivantes : (1) Cet Appareil Ne Doit Pas Causer Des Interfrences Nuisibles, Et (2) Cet Appareil Doit Accepter Toute Interfrence Reue, Y Compris Les Interfrences Qui Peuvent Provoquer Un Fonctionnement Indsirable.. Le Fabricant N'est Pas Responsable Des Toutes Interfrences Radio Ou Tlvision Causes Par Des Modifications Non Autorises Apportes Cet Appareil. De Telles Modifications Peuvent Empcher Lutilisateur Dutiliser L'appareil. Ic Note:
This Device Complies With Part 15 Of The Fcc Rules And Industry Canada License-exempt Rss Standard(s). Operation Is Subject To The Following Two Conditions: (1) This Device May Not Cause Harmful Interference, And (2) This Device Must Accept Any Interference Received, Including Interference That May Cause Undesired Operation. The Manufacturer Is Not Responsible For Any Radio Or Tv Interference Caused By Unauthorized Modifications Or Change To This Equipment. Such Modifications Or Change Could Void The Users Authority To Operate The Equipment. The Users Manual Or Instruction Manual For An Intentional Or Unintentional Radiator Shall Caution The User That Changes Or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void The User's Authority To Operate The Equipment. In Cases Where The Manual Is Provided Only In A Form Other Than Paper, Such As On A Computer Disk Or Over The Internet, The Information Required By This Section May Be Included In The Manual In That Alternative Form, Provided The User Can Reasonably Be Expected To Have The Capability To Access Information In That Form. 3 Important Information RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements Ibefore using the two-way mobile radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form.
!
WARNING
!
CAUTION This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to remain below RF exposure limits. This radio is NOT authorized for general population, consumer, or any other use. Changes or modifications not expressly approved by EXCERA could void the user's authority to operate the equipment. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Refer to the following websites for more information on what RF energy exposure is and how to control exposure to assure compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov./SLTC/radiofrequencyradiation/index.html 4 Important Information Federal Communications Commission Regulations Before it was marketed in the United States, the Digital mobile radio was tested to ensure compliance with FCC RF energy exposure limits for two-way mobile radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. The radio has an RF exposure product label. Also, the Product Safety Manual and this Operators Manual include information and operating instructions required to control RF exposure and to satisfy compliance requirements. Operation Safety Recommendations Occupational Safety Guidelines And Safety Training Information To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to the following basic guidelines:
The push-to-talk button should only be depressed when intending to send a voice message. The radio should only be used for necessary work-related communications. The radio should only be used by authorized and trained personnel. It should never be operated by children. Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should service the radio. Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. 5 Important Information Transmitter Hazards
!
WARNING The operator of any mobile radio should be aware of certain hazards common to the operation of vehicular radio transmissions. Possible hazards include but are not limited to:
Explosive Atmospheres Just as it is dangerous to fuel a vehicle while its engine is running, be sure to turn the radio OFF while fueling the vehicle. If the radio is mounted in the trunk of the vehicle, DO NOT carry containers of fuel in the trunk. Areas with potentially explosive atmosphere are often, but not always, clearly marked. Turn the radio OFF when in any area with a potentially explosive atmosphere. It is rare, but not impossible that the radio or its accessories could generate sparks. Interference To Vehicular Electronic Systems Electronic fuel injection systems, electronic antiskid braking systems, electronic cruise control systems, etc., are typical of the types of electronic devices that can malfunction due to the lack of protection from radio frequency
(RF) energy present when transmitting. If the vehicle contains such equipment, consult the dealer for the make of vehicle and enlist their aid in determining if such electronic circuits perform normally when the radio is transmitting.
ElectricBlastingCapsTopreventaccidentaldetonationofelectricblastingcaps.DONOTusetwo-wayradioswithin1000feet(305
meters)ofblastingoperations.AlwaysobeytheTurnOffTwo-WayRadios(orequivalent)signspostedwhereelectricblastingcapsare
beingused.(OSHAStandard:1926.900).
RadioFrequencyEnergyTopreventburnsorrelatedphysicalinjuryfromradiofrequency energy, do not operate the transmitter when anyone outside of the vehicle is within the minimum safe distance from the antenna as specified in Table 1.
VehiclesPoweredByLiquefiedPetroleum(LP)GasRadioinstallationinvehiclespoweredby liquefied petroleum gas, where the LP gas container is located in the trunk or other sealed-off space within the interior of the vehicle, must conform to the National Fire Protection Association standard NFPA 58. This requires:
ThespacecontainingtheradioequipmentmustbeisolatedbyasealfromthespacecontainingtheLPgascontaineranditsfittings.
OutsidefillingconnectionsmustbeusedfortheLPgascontainer.
TheLPgascontainerspaceshallbeventedtotheoutsideofthevehicle. 6 Important Information
VehiclesEquippedwithAirbagsFordriverandpassengersafety,avoidmountingtheradio s control head (or any other component)
above or near airbag deployment areas. In addition to driverside and passenger-side front-impact airbags, some vehicles may also be
equipped with side-impact airbags. For occupant safety, verify the location of all airbags within the vehicle before installing theradio
equipment. Radio Frequency Interference FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and, 2. This device must accept any interference received, including interference that may cause undesired operation. Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 7 Important Information Please read this manual carefully before use. Alert Icons Caution:Indicates situations that could cause body injury or damage to your products. Note Indicates tips that can help you make better use of your products. Packing List Please unpack carefully and check that all items listed below are received. If any item is missing or damaged ,please contact your dealer. Radio Palm Microphone Disabled Frequency 360.670MHz 364.800MHz 384.000MHz 3 Fuse 4 Microphone Hanger 5 Mounting Bracket and Screws Kits Caution!
Restricted to occupational use to satisfy FCC RF exposure limits. 6 Power Cord 8 GPS Antenna User Manual 7 8 Before Use Installation Schematic Drawing 8 10 7 6 5 4 3 2 1 9 No. 1 2 3 4 5 6 7 8 9 10 Parts Name Bracket Locking Knob Screws Radio Antenna Power Inlet GPS Antenna Power Box Palm Microphone Jack Fuse 1.Install the bracket on both sides of Radio with screws and lock knobs. 2.Plug the palm microphone into radio assigned Plam Microphone Conector. 3.Plug the antenna into the back of radio assigned connector. 4.Plug the GPS antenna into the back of radio assigned connector. 5.Plug the power cable into the Power Inlet . 9 Before Use Products Control No. Part Name No. Microphone Connetor TK Key Volume Control/Channel Selector Knob LCD Display P3 Key/Called Key/Calling Key Menu Key P1,P2 Key Part Name Setting Key No. P4 Key/Hangup Key/Home Key Up/Down Key LED Indicator Speaker Bracket Knob Antenna Part Name Power Inlet API Connector GPS Antenna 10 Before Use Microphone Control No. Part Name No. Microphone Fixed Bracket Microphone Fixed Button PTT Key P1 Key P2 Key Part Name Microphone Menu Key No. Part Name Setting Key Hangup Key/Home KeyP4 Called/Calling KeyP3 TK Key Numeral Key Up/Down Key 11 Before Use LED Indicator Status Icon LED Indicator Radio Status Icon Icon Name LED flashes green slowly. Standby(no load) LED flashes green rapidly. Upgrading or powering on LED glows green. LED flashes red rapidly. LED glows red. Receiving Reserving Transmitting LED flashes orange slowly. Scanning LED flashes orange rapidly. Reserving LED glows orange. After voice communication ends,you can hold down the PTT key to talk while the LED is glowing orange. MMM Signal Strength Icon New Message Icon , Inbox Icon is full Scan Icon High Power Icon Middle Power Icon Low Power Icon Accessory Icon Roam Icon GPS Icon Missed Call Icon 12 Product Function and Operations Operation Mode This radio supports three operation Mode :DMR Trunking mode,MPT Trunking mode and Conventional mode(Digital and Analog).Switching Methods:
Press the Setting Key to access Function Setting- Mode Setting and select a appropriate mode. Note:To access Digital Conventional Mode and Analog Conventional Mode to select Conventional Mode. Product Information Display You may achieve the following product information in this interface : Radio Alias,Radio ID,Series Number, Model Name , Model Number,Frequency Range, Radio Versions,Data Base Versions,Vocoder Versions, Latest Programming Date and ESN Code and so on. Press Setting Key to access Product Information interface and review all the information. 13 Time and Date Display Setting Use this function to modify this radio Date and Time. Press SettingKey to access Radio Setting-Date and Timeinterface to modify the Date and Time. Alert Tone This function enable you set the following tones for your radio:Keypad Tone, Calling Tone,Called Tone, Function Tone,Warning Tone,Low Battery Toneand Message Tone Press Setting Key to access Radio Setting-Tone. Note: The function tone is the alert tone of the programmable Key function On/Off and Switching ,such as High or Low power Switching and Zone Switching. Backlight To set the backlight parameters of On/Off time,Off Type and Brightness Value. Press Setting key to access Radio Setting-Display Setting . Menu Reset This radio supports Menu Reset function ,that is ,if you dont operate the menu for a predefined time period. This radio will automatically back to the home screen. Hold down the Setting Key ,go to the Product Setting
-Menu Reset Product Functions and Operations Programming Key You are available to set the keys P1,P2,P3,P4,Up,Downand TK key as the shortcuts,such as High Power and Low Power switching and Zone Up and Zone Down, Squelch and Scan . This function only via the programming software setting. High Noise Reduction This function will effective reduce the noise under the high noise conduction. The noise reduction reach 25dB and makes voice will be clear. This function are available for your setting through the Programmable key and radio Menu. Note: This feature default off .If this feature is enabled , your speaking volume will be low. After this feature is enabled, you need speak near the MIC. Time- out Timer(TOT) The purpose of TOT is to prevent any user from occupying a channel for an extended period.You can set the longest time of single pressing PTT.If the preset time expires ,the radio will terminate transmission automatically . This feature can be enabled via the programming software Setting. GPS Positioning This function helps to get and upload the radio GPS positioning data(As shown). Press Setting Key ,to go to "Radio Information-"Positioning System- Positioning System On/Offto turn On/Off GPS function. After GPS turn on,the radio status Positioning icon will display.If the GPS locate successfully ,the icon change to from . Review the GPS Positioning data from the Radio information- Positioning System- Radio Positioning Information. 14 Product Functions and Operations Note:
To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to 5cm from your mouth. Private Call Under DMR trunking mode, to set Private Call type via trunking system. FOACSU and OACSU FOACSU: While seting up a call,ring warn the calling party, and the called party receive the call through manual operation. OACSU : While seting up a call without any ring warn for the calling party ,and the called party receive the call automatically. Transmitting a Private Call 15 You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs 1.Press Menu Key to go to main Menu. 2. Go toContacts List - Private Call Contacts,or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call Contacts you want to call. 4. Use P3 Key or PTT Key to transmitting a call. Through microphone manual input 1.Input a Private Call number you want to call in home screen . 2. Use P3 Key ,PTT Key or select Dail Key # to transmitting a Private Call. Transmitting a call through Redail List or Recall List. 1.Use P3 Key to Redail List or P4 Key to Recall List to input a Private Call number you want to call in home screen . 2. Use P3 Key or PTT Key to transmitting a Private Call. Note:
Transmitting a Private Call Failed while products unregistered or Registration failed . Product Functions and Operations Receiving and Responding to a Private Call Call Duration After setting up a Private Call ,Both the calling party and called party LCD will display call duration in time .Unit is Minutes :Seconds. (As shown below) When a Private Call is received ,your radio automatic to receive a Private Call and sounds De,De,your radio will display the icon
(As shown above) . You may press P3 key or PTT key, the incoming call ring and icon will disappear ,the first line display the incoming call alias or ID.
(As shown above) Note:No need press the Receiving Key while setting automatic receiving and responding to a Private Call . Voice Communication After setting up a private Call ,Both the calling party and called party are in PPT allowed interface ,and hold down PTT to talk. The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time, this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. 16 Product Functions and Operations Current Channel Display Ending a Call Display radio channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication. Display operation channel After setting up a call LCD will display the operation channel of the current base station occupied. 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. 17 DMR Functions and Operations Group Call Receiving and Responding to a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a call to the preset contacts. In the home screen,hold down PTT Key to transmitting a Group Call to the Group Call Contacts preset for the current Channel.
(By the Group Knob to select a group you want to call). Transmitting a group call to the contacts List or Call Logs. 1. Press Menu Key to Main Menu 2. Go to Contracts List--Group Call Contacts or Call Logs to access outgoing/Incoming /Missed Call. 3. Use the Up/Down Key to select the Group Call contacts you want to call. 4. Use P3 Key or PTT Key to transmitting a Group Call. Transmitting a Group Call through manual input 1.Input a Group Call number you want to call. 2. Use PTT Key, P3 Key or Dail Keypad # to transmitting a Group Call. Transmitting a call through recall List or Call Logs 1. Use P3 key ,to go to Call Logs List or press P4 Key to select group call number you want to call. 2. Use P3 key or PTT Key to transmitting a Group Call. When a Group Call is received, your radio will display the icon and have a "De"alertting tone. Press P3 or PTT Key,the incoming call iron will disappear . Late Access Before Group Call set up to the ended, those following type radios will join in this havent ended Group Call such as :
Raio just powering on , Radio just roams from other base station or radio just releases from other group . Voice Call After seting up a call ,Hold down PTT key to initiate a call when the calling party and the called party are in the PTT Allowed interface. 18 DMR Functions and Operations Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown below) Group Call Calling Party ID or Alias Display After initiating a Group Call, all parties LCD will display the Group Call calling party ID or alias. Communication Channel Display Display master control channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication. Display main operation channel After setting up a call,LCD will display the operation channel of the current base station occupied. The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time ,this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end a Group Call and access this group by Late Access. 19 DMR Functions and Operations Ending a Call Emergency Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the time expires silence period . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Basestation signal lost. All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999 is the last one Group Call number in this team , When you initiate a Team All Call,all member in this team will receive and respond to this call . Three methods are aviable for transmitting a Team All Call :Transmitting a call to preset contacts ,transmitting a call through group call contacts or manual input number . The specific operation is the same as the Group Call. When you initiate a Whole Network Call ,and all the member will join in this call ,1981,1982 are Whole Network Call number. Whole Network All Call The three methods are available for transmitting a Whole Network Call:transmitting a call to the preset contacts , transmitting a call through Group Call Contacts or through manual input (Add * key befor 1981 or 1982 ). Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software under trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ).Use P3 key ,PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call .Only the calling party has the rights to speech. You may initiate a Broadcast Call through manual input .(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set Priority Call level:
Low ,Middle ,High or Preemption Call ,Preemption Call is the highest level in Priority Call . You may initiate Priority Call through manual dail (Add *8*
before number). Press Initiating Call key ,PTT key or # key to initiate a call. 20 Receiving and Responding to a Group Call When a Private Call / Group Call is received under trunking mode,your radio will set up calling automatically and have one "De"alert tone. Late Access After setting up a Group Call , allows those members will join in this call ,which havent joined in Group Call . Emergency Caution Setting a Private Call,Group Call or Dispatch Station Call number via CPS setting,press the Emergency Caution Key on the microphone or the front panel of radio for 3 seconds to initiate a Emergency Call. Contacts List To access to this menu,Press Menu Key to Main Menu and select Contacts List . DMR Functions and Operations Dispatch Station Call This radio can call the Dispatch Station.The number of Dispatch Station are based on configuration. DMR Republic Network Phone Call The calling with Public Network Phone is called Public Network Call. Network Phone Call have fixed phone call and mobile phone. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as013112345678 Such as 0013112345678 DMR-MPT Call Base on the associated DMR-MPT Group Call number configured by base station , you can achieve DMR trunking mode radio call DMR trunking mode radio each other. DMR trunking radio transmit a DMR-MPT call In DMR trunking mode ,you may transmit a DMR-MPT Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.
(Specific operation is the same as Group Call) 21 DMR Functions and Operations Private Call Contacts New Contacts You can save up to 256 entries in the private Call Contacts list . To access this item, select"Contacts-Private Contacts" or through Private Call List shortcut key for the contacts list via CPS configuration. a) To review ,modify or delete any one of contacts on list. b) If you want to delete all contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
Group Call Contacts You can save up to 256 entries in group Call Contacts list . To access list throughContacts List -Group Call Contacts. a)To review the details of any contacts on the list ,just like alias and ID information. Public Network Contacts You can save up to 256 entries in the Public Network Contacts. To access this item through "Contacts List-Public Network Contacts"
a) To review ,modify or delete any one of contacts on list. b) If you want to delete all Contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
You can add a Private Call Contacts and Public Network Contacts to Contacts List . The New Private Call Contacts will save to Private Call Contacts List automatically . The New Public Network Contacts will save to Public Network Contact List automatically . a)The New Private Contact number must be unique. b)The alias of each Private Call Contacts save up to 16 characters,the available number is 8 figure [NumberID must conform to the rules of dial-up]. c)The alias of each Public Network Contacts save up to 16 characters, the available numbeic is 18 figures
[NumberID must conform to the rules of dial-up]. Note:You can switch input method through # key when input contacts alias. Message To access this item,press Menu key to go to main menu to selectmessage. 22 DMR Functions and Operations Inbox The Inbox can save up to 100 received messages.When the Inbox save up to 90 received messages ,and go on receiving messages ,radio will appear notes Inbox will be full, please delete messageand the earliest message will be overwritten by the latest one automatically. Outbox The Outbox can save up 100 sent messages. Each message will appear appropriate Iron to note message send successfully or not . a) When the message sent successfully, the icon""will appear. b) When the message sent unsuccessful, the icon"!" will appear and please send again. When the Outbox is full, the earliest message will be overwritten by the latest one automatically. Drafts The Drafts can save up to 10 drafts messages into Drafts. When the Drafts is full, the earliest message will be overwritten by the latest one automatically. New Msg You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 23 Quick Text Under this option there are some text messages
(10 entries at most )preset by your dealer.You can choose and send any entry. Status Msg There are some text message(95 entries at most ) preset by your dealer in this menu. You can select and send directly . The status Msg is status code. Call Logs Press Menu Key to access Main Menu and then selectCall Logs. This radio can save up to 200 call entries.When the entries list is full.The earliest entry will be over written by latest one automatically.To view, delete, or delete all after selecting one call entries . Redial List and Callback List Use P3 Key and P4 Key to access "Redail List "and"
Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be over written by latest one. DMR Functions and Operations Redail List All outgoing call list will be save in the Redial List . To access this item,Use P3key in home screen (As shown) . Use P3 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Vehicle Inquiry To access this item ,press Menu Key to access Main Menu to select Applications --Information Inquiry". Callback List You can input the vehichle license number and sent it to dataspace when you want to inquiry it .You also can review it from the history record. The callback List will save up all the incoming entries. To access this item ,Use P4key in the home screen(As shown). Use P3 key or PTT key to initiate a call ,delete it or delete all. ID Inquiry To access this item ,press Menu Key to access Main Menu to select Applications --ID Inquiry". 24 DMR Functions and Operations You can input ID number to the ID editing interface and sent it to dataspace when you want to inquiry it .You also can review it from the history record. Status Filing Press Menu Key to access Main Menu to select ApplicationsStatus Filing. When the feature is enabled,the control center or other radio holder will master your working status etc.
[Such as:on the job ,off the job or just leave the job]. You may process this function quickly through Shortcut Key Setting Menu. Filing Address Setting: You may send your status to your assigned receiver through Filing Address Setting . 25 Roming The radio signal strength are not strong enough to sure seamless communication. To ensure no any break communication to rome one base station to another base station . To enable this function, set in CPS as below :
1. In Scan Public Setting interface, select Roaming switching or Roaming in Transmitting. To set Enable Limits Interval Time Strength Excursion , Switching Limits in Transmitting , Switching Limits in Receiving Scan In the home screen, the radio signal strength are not strong enough to achieve seamless communication. This feature will enable radio will register from one base station to another.To enable this item, set in cps as follow:
1. To access this item, press Scan Public Setting interface in CPS and then select scan 2. To set Signal Strength Level .This setting is used to enable the function while the signal strength is under a preset value. The radio will register from one station to another. 3. To set the Time Interval, Signal Strength Excursion, the radio will register to another high signal strength base station automatically. MPT Trunking Functions and Operations To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5to 5 centimeters away from your month . Private Call Transmitting a Private Call You may transmit a Private Call through the following methods. When transmitting a Private Call ,this radio will set up calling automatically . Transmitting a call through Contacts and Call Logs 1.Press Menu Key to go to Main Menu 2. Go toContacts List - Private Call Contacts List,Or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call Contacts you want to call. 4. Use P3 Key or PTT Key to transmitting a call Through Manual Input 1.Input a Private Call number you want to call in home screen. 2. Use P3 Key ,PTT Key or select Dail Key # to transmitting a Private Call. Transmitting a Private Call through Redail List or Recall List. 1.Press P3 Key to Redail List or P4 Key to Recall List to Input a Private Call number you want to call in home screen. 2. Use P3 Key or PTT Key to transmitting a Private Call. Note:
Transmitting a Private Call failed while products unregistered or registration failed . Receiving and Responding to a Private Call When a Private Call is received ,your radio automatic to transmitting a Private Call and aDealert tone sounds, your radio will display the icon. (As shown above). You may press P3 key or PTT key,coming call Ring and icon will disappear. The first line display the coming call alias or ID
(As shown above). Voice Communication After setting up a Private Call ,both the calling party and called party are in PPT authorization interface , and hold down PTT Key to talk. While transmitting voice LCD will display this iron While receiving voice LCD will display PTT authorization interface . 26 MPT Trunking Function and Opertaions Call Duration After setting up a Private Call ,Both the calling party and called party LCD will display call duration in time .Unit is Minutes :Seconds. (As shown below) The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time, this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. 27 Communication Channel Display Display master control channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication. Display main operation channel After setting up a call, LCD will display the operation channel of the current base station occupied. Ending Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Basestation signal lost. MPT Trunking Function and Opertaions Group Call Receiving and Responding to a Group Call You may transmit a Group Call through any of the following methods. Transmit a call to the preset contacts. Hold down PTT Key to transmit a Group Call to a Group Call contacts preset for the current channel in home screen.
(By the Group Knob to select a group you want to call) Transmitting a group call to Contracts List--Contacts 1. Press Menu Key to Main Menu 2. Go toContracts List--Contacts 3. Use the Up/Down Key to select the Group Call contacts you want to call. 4. Use P3 Key or PTT Key to transmittng a Group Call. Transmitting a group call through manual input 1.Input a group call number you want to call in the home screen. 2. Press PTT Key,P3 Key or Dail Keypad # to transmitting a Group Call Transmitting a call through recall List or Call Backlist 1. Use P3 key ,to go to Call Logs List or press P4 Key to select Group Call number you want to call. 2. Use P3 key or PTT Key to transmit a Group Call. When a Group Call is received ,your radio set up call automatically and sounds De,your radio will display the icon .
(As shown above) The first line display the coming call alias or ID. Late Access After set up group call,this radio allows the member havent joined in this group transmit this call during calling . Voice Communication After setting up a Group Call ,both the calling party and called party are in PPT authorization interface ,and hold down PTT Key to talk. While transmitting voice LCD will display this iron ,While receiving voice LCD will display PTT Allowed interface . 28 Communication Channel Display Display master control channel After initiating a call application ,LCD will display master control channel of radio registered base station before setting up voice communication. Display main operation channel After setting up a call LCD will display the operation channel of the current base station occupied. Ending Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. MPT Trunking Function and Opertaions Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown) The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time , this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end Group Call and access this group throughLate Access 29 MPT Trunking Functions and Operations All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999is the last one Group Call number in this team ,When you initiate a team All Call,all member in this team will receive and respond to this call . Three methods are aviaible for transmitting a Team All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number . The specific operation is the same as the Group Call. System All Call When you transmit a System All Call ,all user in this system will join in this call. 1981is the number of System All Call. Three methods are aviailable for transmitting a System All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number .
(Add * Key before 1981). Emergency Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ). Use P3 key ,PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call . Only the calling party has the rights of speech. You may initiate Broadcast Call through manual input .
(Add *11* before number ). Use P3 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set a Priority Call level:Low ,Middle ,High or Preempted Call . You may initiate Priority Call through manual dail
(Add *8* before number). Use P3 Key , PTT Key or # key to initiate a call. Dispatcher Station Call This radio can call the Dispatcher Station. The number of Dispatcher Station are based on configuration. MPT Public Network Calling The calling with Public network phone is called MPT public network Call. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Making Local Mobile Telephone Call Add 0 before telephone number Add 0 before telephone number Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 00755-33010296 Such as 013112345678 Such as 0013112345678 30 MPT Trunking Functions and Operations MPT-DMR Call Base on the appropriate MPT-DMR Group Call number configurated by base station ,you can achieve MPT trunking radio cal DMR trunking mode radio each other. MPT trunking radio transmit a MPT-DMR call In MPT trunking mode ,you may transmit a MPT-DMR Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.(Specific operation is the same as group call) Note: In DMR Trunking mode ,your radio must wait to the corresponding group.
(No need wait in this group when the DMR corresponding group is the responsing group ). DMR trucking mode radio initiate a call to DMR-MPT is the same as the above operations. Emergency Caution Setting a Private Call, Group Call or Dispatch Station Call number via CPS setting ,press the Emergency Caution Key on the microphone or the front panel of radio for 3 seconds to initiate a Emergency Call. 31 Receiving and Responding to a Call In DMR trunking mode ,When a group call /private call is received , your radio set up calling automatically and a alert tonDe sounds. The group alias or ID mumber will display on the first line of screen and private calling group name or private ID number will display on the last line. . Late Access After setting up group call,this radio allows the member havent joined in this group transmit this call during calling . MPT Trunking Functions and Operations Call Logs Redail List All outgoing call list will be save in the Redial List . Use P3 key to access this item in home screen.
(As shown) Use P4 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be over written by latest one automatically. To view, delete, or delete all after selecting one call entries . Redial List and Callback List Use P3 P4 key to access "Redail List "and"Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be overwritten by latest one. Callback List The callback List will save up all the incoming entries To access this item ,Use P4 key in the home screen
(As shown). Use P3 key or PTT key to initiate a call ,delete it or delete all. 32 MPT Trunking Functions and Operations Manual Input to Temporary Group For temporary or quicker dispatch and command one group, to call the group number by manual input. Group Call Contacts List will add the temporary group and add it to the current group automatically after ending the call .The temporary group will delete automatically after restarting. Caution!
To enable this function ,must select Manual Dial Temporary Groupin CPS. Scan In home screen, the radio signal strength are not strong enough to sure seamless communication, the radio will register from one base station to another. To enable this item, set in CPS as below:
1. To access this item, press Scan Public Setting interface in CPS and then select Scan 2. To set L1 level of MPT wireless signal strength indicator RSSI .This setting is used to enable the function while the signal strength is under apreset value. When the radio register from one station to another, the radio will register to another high signal strength base station automatically. 3. To set the Sampling Amount, Scan Sampling Period, L0 Level ofMPT Wireless Signal Strength Indicator RSSI. 33 Digital Conventional Functions and Operations Private Call,Group Call and all Call Transmitting a Private Call You may transmitting a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs. 1. Go to"Contacts List-Contacts ",Or go to "Call Logs" and access to the Outgoing/Incoming/Missed list. 2.Use Up /Down Key to select a Private Call Contacts you want to call. 3.Hold down PTT Key to transmitting a Private Call through manual input 1.Go to" Contacts-Manual Dial 2.Input a Private Call number you want to call. 3.Hold down the PTT key to transmitting a Private Call. Transmitting a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a Call through Contacts List orCall Log. 1.Go toContacts List-Contacts or throughCallLogto go to Outgoing/Incoming /Missed Call. 2.Use the Up/Down Key to select a Group Call contacts you want to call. 3.Hold down PTT key to select a Group Call Contacts you want to call. Transmitting an All Call You may transmit a private and an All Call through any of the following methods. Transmitting an All Call through Contacts List or Call Log. 1.Go toContact List-Contactsor throughCallLogto go to Outgoing/Incoming /Missed Call list. 2.Use the Up/Down Key to select an All Call contacts you want to call. 3.Hold down PTT key to Transmit an All Call. Note:All call ID is a fixed ID. Emergency Call Meet an emergency, you can use this function to search companion or control center for help. If you need in a certain channel enabled on emergency call function, you must configure via programming software. This channel is relevant to one call ,only press"TK"key for long time to transmit a emengency call . 34 Digital Conventional Functions and Operations Message To access the Menu,press Menu key to go to Main Menu to selectmessage. Inbox This radio can save the received messages into Inbox. The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages, this radio will appear notesInBox will be full, please delete messageand the earliest message will be over written by the latest one automatically. Outbox This radio can save the sent messages into Outbox. Each message will appear appropriate Iron to note message send successfully or not . a,When the message sent successfully, the icon""will appear. 35 b, When the message sent unsuccessful, the icon""
will appear and please send again. The Outbox can save up to 100 sent messages. When the Outbox is full, the earliest message will be overwritten by the latest one automatically. Drafts This radio can save up the edited message into Drafts. The Drafts can save up to 10 draft message .When the Drafts is full, the earliest message will be over written by the latest one automatically. New Msg You can create new text message(179 characters at most) and send it to an individual user or to a talk group. Quick Text Under this option there are some text messages(10 entries at most )preset by your dealer.You can choose and send any entry. Status Msg Under this option there are some text message(95 entri es at most ) preset by your dealer.You can choose and send any entry .The status Msg is status code. Digital Conventional Functions and Operations Call Logs Zone To access this menu,press Menu key to Main Menu and select"Call Logs,or press the shortcut key for Call Logs directly. This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry ,you can perform any of these operations:hold down the PTT key to initiate a call, add it to Contact List ,or delete it . To delete all entries in the Outgoing /Iincoming/Missed list at a time,Select Call Logs-Outgoing /Incoming/Missed-Delete All. Zone is a channel group,you can list the same channel in a zone. This function will help you manage the current channel. This radio supports up to 16 zones. Each zone up to 64 channels. You can select your desired zone as following methods. 1You can use this menu to select your desired zone To access ZonePress Up/Down key to select the Zone,then press OK Key to switch to the desired zone. 2You can use the programming Key to select your desired zone. If you preset Zone Up /Zone Down shortcut key, press this key to switch to desired zone. 36 Analog Conventional Functions and Operations DMO and TMO This radio supports DMO and TMO DMO:Set all radio transmitter and receiver at same frequency via CPS configuration. Under this mode ,radios communicate with each other directly. TMO :Set all radio transmitter and receiver at different frequency via CPS configuration. Under this mode , radios communicate with each other via a repeater. Squelch Level You can select the squelch Level by menu from Strengthen , Normal and Always On . Or press Squelch level Switching programmable Key to switch the level. This radio default at Norma generally.Strengthen requires the receipt signal high enough to turn on the speaker . When the level set at Normal (Squelch level is 0) this radio will turn on the speaker directly automatically and sounds the background voice . 37 Optional Accessories The following items are the main optional accessories for the product. Consult your local dealer for more other accessories. GPS Antenna EAS157501 Sucker Antenna Wireless PTT EPTTB01 Bluetooth Headset EEWB03E Programming Cable EPC02 Palm Microphone with Keypad EMKA011 Power Supply EEPS01 Vehicle Remote Control Head Mount Kit ERC01 Motorcycle Remote Control Head Mount Kit ERC02 Caution: Use the accessories specified by the Company only. Otherwise, the Company shall not be liable for losses or damages arising out of use of unauthorized accessories. 38 Troubleshooting Phenomena Analysis Solution The battery may be improperly installed Remove the battey and attach it again. The Radio Can not be powered on. The battery may run out The battery may suffer from poor contact caused by dirtied or damaged battery contacts Recharge or replace the battery Clean the battery contacts,If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. The Radio can not be regisitered. The radio can not detect the basestaion signal. The radio is not the basestation legal user ,can not be regisitered. Make sure the radio in base station effective signal range. Contact the person who are in charge of this base station,make sure the radio are the legal user of base station NMS Repeated registration During receiving signal is discontinuous. Make sure the radio in base station effective signal range. The Radio Can not transmit and respond call. No voice when transmiting and responding call. The responding party is inactive repeatly during calling. During receiving signals, the voice is weak discontinuous or totally inactive. During receiving signal is weak. Make sure the radio in base station effective signal range. The radio ID may be repeated Signalis discontinuous,get access to transmitting again after signal is totally inactive. Contact the person who are in charge of this base station, make sure no the radio ID are repeated of base station NMS. Make sure the radio in base staion effective signal range. The battery strength may be too low. Recharge or replace the battery. The volume may be set to a low level. The antenna may be get loose or may be improperly installed. The speaker may be blocked or damaged Increase the volume by Volume Control Knob. Power off the radio ,and re-install the antenna. Clean surface of the speaker.If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. You can not communicate with other members Irrelevant communiction or noise is heard on the channel The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The noise is too lound. You may suffer from external disturbance
(such as electromagnetic interference). You may be at an unfavorable position.For example,your communication may be blocked by high buildings or frustrated in the underground areas. Move to an open and flat area,and restart the radio. Stay away from equipment that may cause interference. If the above solutions can not fix your problems,or you may have some other queries,please contact us or your local dealer for more technical support. 39 Warranty and Maintains Scope of Warranty EM 8100 Digital Radio and Acessories. Warranty Contents 1.From the date of purchase and without any artificial damage, Warranty varies based on product types . We will provide 36 months warranty service for main radios and 12 months warranty service for battery ,charger ,adapter and other standard accessories etc. 2.Completes Warranty Card or provides valid original invoices or receipts for warranty judgment .This invoice or receipt shall indicate radio accessories, radio serial number ,purchase date and amount. 3.Products problem caused by non-artificial can return, exchange or repair within 7 days. 15 days can be a replacement or repair, more than 15 days and within the warranty can be free repair. 4.We provide life-long maintenance service for customer .For products beyond the warranty, we still can continue to provide repair and maintenance services and will charge for those service. Non-Warranty Service 1 .Defect or damage is due to improper use of the product, including but not limited to the defects and damage caused by using this product without complying with the warning or user manual. 2.Defect or damage due to remake, change and disassembly or make use of non-original accessory or battery without the authorization of Excera. 3.Defect or damage is due to force majeure (earthquake, flood disaster, fire disaster, etc.) 4.Cannot produce valid warranty certifications (Warranty Card, Invoice or Receipt etc.) 5.By the rational judgment of Excera, serial number code label, the accessory date code label or relevant Excera a sign of a product has been removed, defaced or altered. 6.Fair wear and tear. 7.Battery in the following circumstances:
1)Any artificial damage or unsealed phenomenon of battery case seal. 2)Defect or damage due to the charging or using at variance with the products prescribed. 40 Disclaimer The company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied ,modified,translated,or distributed in any manner without the express written permission of us. 41 This equipment complies with FCC RF exposure guidelines. This equipment should be installed and operated with minimum distance 100cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-03-22 | 136 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2016-03-22
|
||||
1 2 3 | Applicant's complete, legal business name |
Shenzhen Excera Technology Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0024703316
|
||||
1 2 3 | Physical Address |
3rd Floor, Jiada R&D Building
|
||||
1 2 3 |
Hi-Tech Park North, Nanshan District, Shenzhen, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 3 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2AE6C
|
||||
1 2 3 | Equipment Product Code |
EM8100VHF
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
S**** F********
|
||||
1 2 3 | Title |
Certification Engineer
|
||||
1 2 3 | Telephone Number |
+86-7********
|
||||
1 2 3 | Fax Number |
+86-7********
|
||||
1 2 3 |
s******@excera.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Mobile Radio | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is conducted at antenna port. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. A label, as described in this filing must be displayed on the device to direct users to the specific training information required for meeting RF exposure requirements. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 100 cm is maintained between the antenna and persons outside of the vehicle and with a maximum transmitting duty factor not exceeding 50% for satisfying MPE compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. | ||||
1 2 3 | Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. | |||||
1 2 3 | Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Bay Area Compliance Laboratory Corp. (Shenzhen)
|
||||
1 2 3 | Name |
J******** C********
|
||||
1 2 3 | Telephone Number |
08675******** Extension:
|
||||
1 2 3 | Fax Number |
08675********
|
||||
1 2 3 |
j******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | EF | 136 | 174 | 45 | 5 ppm | 9K92F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | EF ES | 136 | 174 | 45 | 5 ppm | 7K62FXD | |||||||||||||||||||||||||||||||||
1 | 3 | 9 | EF ES | 136 | 174 | 45 | 5 ppm | 7K62FXW | |||||||||||||||||||||||||||||||||
1 | 4 | 9 | EF | 136 | 174 | 25 | 5 ppm | 9K92F3E | |||||||||||||||||||||||||||||||||
1 | 5 | 9 | EF ES | 136 | 174 | 25 | 5 ppm | 7K21FXD | |||||||||||||||||||||||||||||||||
1 | 6 | 9 | EF ES | 136 | 174 | 25 | 5 ppm | 7K21FXW | |||||||||||||||||||||||||||||||||
1 | 7 | 9 | EF | 136 | 174 | 5 | 5 ppm | 9K92F3E | |||||||||||||||||||||||||||||||||
1 | 8 | 9 | EF ES | 136 | 174 | 5 | 5 ppm | 7K41FXD | |||||||||||||||||||||||||||||||||
1 | 9 | 9 | EF ES | 136 | 174 | 5 | 5 ppm | 7K41FXW | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0030000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0100000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC