all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 6 |
|
User manual | Users Manual | 1.74 MiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Users Manual | Users Manual | 3.08 MiB | ||||
1 2 3 4 5 6 |
|
Internal photos | Internal Photos | 505.47 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
External photos | External Photos | 330.52 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Label | ID Label/Location Info | 611.57 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Label location | ID Label/Location Info | 181.71 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Agent letter | Cover Letter(s) | 168.16 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Antenna specification | Test Report | 1.27 MiB | December 15 2023 | |||
1 2 3 4 5 6 | Attestation Statements | |||||||
1 2 3 4 5 6 |
|
Attestation letter | Cover Letter(s) | 164.00 KiB | December 15 2023 | |||
1 2 3 4 5 6 | Block Diagram | Block Diagram | December 14 2023 | confidential | ||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 |
|
Confidentiality request letter | Cover Letter(s) | 181.98 KiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Covered equipment list attestaion | Attestation Statements | 250.23 KiB | December 15 2023 | |||
1 2 3 4 5 6 | External Photos | |||||||
1 2 3 4 5 6 |
|
Extended frequency letter | Cover Letter(s) | 307.75 KiB | December 15 2023 | |||
1 2 3 4 5 6 | ID Label/Location Info | |||||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 | Internal Photos | |||||||
1 2 3 4 5 6 |
|
Model different letter | Cover Letter(s) | 110.64 KiB | December 15 2023 | |||
1 2 3 4 5 6 | Operational Description | Operational Description | December 15 2023 | confidential | ||||
1 2 3 4 5 6 | Cover Letter(s) | |||||||
1 2 3 4 5 6 | Parts list | Parts List/Tune Up Info | December 15 2023 | confidential | ||||
1 2 3 4 5 6 | RF Exposure Info | |||||||
1 2 3 4 5 6 |
|
SAR test report | RF Exposure Info | 4.58 MiB | December 15 2023 | |||
1 2 3 4 5 6 | Schematics | Schematics | December 15 2023 | confidential | ||||
1 2 3 4 5 6 | Test Setup Photos | |||||||
1 2 3 4 5 6 |
|
Test report | Test Report | 2.47 MiB | December 15 2023 | |||
1 2 3 4 5 6 |
|
Test setup | Test Setup Photos | 192.86 KiB | December 15 2023 | |||
1 2 3 4 5 6 | Tune up | Parts List/Tune Up Info | December 15 2023 | confidential | ||||
1 2 3 4 5 6 |
|
US agent attestation | Attestation Statements | 149.19 KiB | December 15 2023 |
1 2 3 4 5 6 | User manual | Users Manual | 1.74 MiB | December 15 2023 |
Contents Important Information RF Energy Exposure Information Operation Safety Recommendations Radio Saftety Information and RF Radiation Information Disabled Frequency Packing List Before Use Ready to Use Product Controls LED Iindicator Status Icons Product Functions and Operations Operation Mode Produt Information Display Time and Date Setting Alert Tone Vibration Backlight Menue Reset Locking/Unlocking the Keypad Programmable Keys 3 4 5 7 7 7 12 12 15 16 16 17 17 17 17 17 17 17 18 18 18 High Noise Reduction Time-out-Timer(TOT) GPS Positioning DMR Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call DMR Public Network Call DMR-MPT Call Contacts Message Status Message Call Logs Redail List and Callback List Vehicle Inquiry ID Inquiry Status Filing 18 18 18 19 19 21 22 23 23 23 23 23 23 24 25 25 26 26 27 27 27 1 Optional Accessories Troubleshooting Warranty and Maintains Scope of Warranty Warranty Contents Non of Warranty Disclaimer Warranty Card 38 39 40 40 40 40 41 42 Contents MPT Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call MPT Pubic Network Call MPT-DMR Call Call Logs Redail and Callback List Digital Conventional Functions and Operations Private Call,Group Call and All Call Emergency Call Information Call Logs Zone Analog Conventional Functions and Operations DMO and RMO Mode Squelch Level 2 28 28 29 31 31 31 31 31 32 32 32 33 34 34 34 35 36 36 37 37 37 Important Information Note:
Ic Note : Cet Appareil Est Conforme La Partie 15 Des Rglements De La Fcc Et Aux Normes Rss De Lindustrie Du Canada. Son Fonctionnement Est Soumis Aux Deux Conditions Suivantes : (1) Cet Appareil Ne Doit Pas Causer Des Interfrences Nuisibles, Et (2) Cet Appareil Doit Accepter Toute Interfrence Reue, Y Compris Les Interfrences Qui Peuvent Provoquer Un Fonctionnement Indsirable.. Le Fabricant N'est Pas Responsable Des Toutes Interfrences Radio Ou Tlvision Causes Par Des Modifications Non Autorises Apportes Cet Appareil. De Telles Modifications Peuvent Empcher Lutilisateur Dutiliser L'appareil. Ic Note:
This Device Complies With Part 15 Of The Fcc Rules And Industry Canada License-exempt Rss Standard(s). Operation Is Subject To The Following Two Conditions: (1) This Device May Not Cause Harmful Interference, And (2) This Device Must Accept Any Interference Received, Including Interference That May Cause Undesired Operation. The Manufacturer Is Not Responsible For Any Radio Or Tv Interference Caused By Unauthorized Modifications Or Change To This Equipment. Such Modifications Or Change Could Void The Users Authority To Operate The Equipment. The Users Manual Or Instruction Manual For An Intentional Or Unintentional Radiator Shall Caution The User That Changes Or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void The User's Authority To Operate The Equipment. In Cases Where The Manual Is Provided Only In A Form Other Than Paper, Such As On A Computer Disk Or Over The Internet, The Information Required By This Section May Be Included In The Manual In That Alternative Form, Provided The User Can Reasonably Be Expected To Have The Capability To Access Information In That Form. 3 Important Information RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements Ibefore using the two-way portable radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form.
WARNING This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to remain below RF exposure limits. This radio is NOT authorized for general population, consumer, or any other use.
CAUTION Changes or modifications not expressly approved by Shenzhen Excera Technology Co., Ltd.could void the user's authority to operate the equipment. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Refer to the following websites for more information on what RF energy exposure is and how to control exposure to assure compliance with established RF exposure limits:
4 http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov./SLTC/radiofrequencyradiation/index.html Important Information Federal Communications Commission Regulations Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC RF energy exposure limits for two-way portable radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. The radio has an RF exposure product label. Also, the Product Safety Manual and this Operators Manual include information and operating instructions required to control RF exposure and to satisfy compliance requirements. Operation Safety Recommendations Occupational Safety Guidelines And Safety Training Information To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to the following basic guidelines:
The push-to-talk button should only be depressed when intending to send a voice message. The radio should only be used for necessary work-related communications. The radio should only be used by authorized and trained personnel. It should never be operated by children. Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should service the radio. Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. 5 Important Information FCC Cau tion :
Part 15.21 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipm ent. Part 15.19 This device complies with part 15 of the FCC R ules. Operation is subject to the following two conditions: (1) T his device may not cause harm ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.105 Note: This equipment has been tested and found to comply with the lim its for a C lass B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm ful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipm ent does cause harmful interferenc e to radio or television reception, which can be determined by turning the equipm ent off and on, the user is encouraged to try to correct the interference by one or more of the following m easures:
Reorient or relocate the receiving antenna. Increase the separation betw een the equipm ent and receiver. Connect the equipm ent into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 6 Important Information FCC RF Radiation Exposure Statement:
This radio is designed for and classified as "Occupational/Controlled Use Only", meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards; NOT intended for use in an General population/uncontrolled environment. DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded. This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. 7 Important Information RED Caution 1. Frequency:136-174MHz, TX Power:<4.2W 2. Operation temperature range: -30~60. 3. RF exposure information: The device complies with RF exposure require when the device used at 25mm form your face and 0mm from the body with the belt-clips. 4. Hereby, Shenzhen Excera Technology Co., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. 5. AC adapter The adapter shall be installed near the equipment and shall be easily accessible. 6. Lithium Battery Risk of explosion if battery is replaced by an incorrect type, dispose of used battery according to the instructions. 8 Important Information Cou n tr y Au stria (AT) Be lg iu m(B E) Fre qu e ncy Ra ng e( MHz) 15 6 .4 8 75 - 15 6.5 12 5 1 60 .3 - 1 60 .30 00 01 ,16 9.4 - 16 9.8 12 5 14 6 - 15 6,1 57 .4 5 - 1 6 0.6 ,1 60 .97 5 - 1 6 1.47 5 ,1 62 .05 - 16 9 .4 , 16 9 .8 2 5 - 1 74 Bu lg ar ia( BG ) 14 6 - 16 1.9 62 5,1 61 .98 75 -1 74 Cro atia (HR) Cypr us (C Y) 13 8 - 14 4,1 46 - 15 6 ,1 57 .45 - 16 0 .6 ,16 0.9 75 - 16 1.4 75 , 16 2 .0 3 75 - 17 4 13 8 - 14 4,1 46 - 15 6 ,1 57 .45 - 16 0 .6 ,16 0.9 75 - 16 1.4 75 , 16 2 .0 3 75 - 17 4 Czech Re pu bl ic (CZ) 14 8 .2 - 14 9 .0 5,1 50 .05 - 15 0.9 75 ,15 2.8 - 15 3.6 5 Den ma rk( DK ) 14 6 - 14 9.9 ,1 50 .05 - 15 3 ,1 54 - 15 6 .4 8 75 ,1 5 6.83 7 5 -1 74 Esto ni a(E E ) Fin lan d( FI) Fra nce (FR) Ge rm an y(DE ) Gr ee ce( E L) Hun g ar y( HU) Ir el an d (IE ) Ita ly(IT) La tvia (LV ) Lith ua n ia( LT ) 15 0 .0 5 - 1 5 6.76 2 5,15 7 .4 5 - 1 6 0.6 ,1 60 .62 5 - 1 60 .95 , 16 0 .9 7 5 - 1 61 .4 7 5,1 62 .0 5 - 1 6 9.4 14 6 .3 0 62 5 - 1 49 .9,1 51 .0 0 62 5 - 1 54 .89 37 5, 15 7 .4 5 - 1 5 8.8,1 61 .17 5 - 1 61 .37 5 ,1 62 .05 - 16 3.4 ,16 5.3 - 1 7 4 16 8 .9 - 16 9 .4 ,17 3.5 - 17 4 14 6 - 14 8,1 49 .1 4 - 1 5 6,1 58 .3 4 - 1 6 7.5 4,17 0 .3 - 17 2 .1 5 13 8 - 14 3.6 ,1 46 - 14 8 .2 ,15 0.0 5 - 1 51 .6,1 54 .5 - 1 61 .4 8 75 , 16 2 .0 3 75 - 17 4 15 6 - 15 6.7 62 5,1 56 .83 75 - 16 7.3 ,16 9.63 7 5 - 1 74 15 4 - 15 6.7 62 5 14 6 - 15 6.4 87 5, 15 6 .8 37 5 - 16 1.9 62 5,1 62 .03 75 - 17 4 14 6 - 17 4 14 6 - 15 6,1 57 .4 5 - 1 6 0.6 ,1 60 .97 5 - 1 6 1.47 5 ,1 62 .05 - 17 4 Lu xem bo ur g (L U) 14 6 - 17 4 Ma lta( MT) 14 6 - 15 6,1 57 .4 5 - 1 6 0.6 ,1 60 .97 5 - 1 6 1.47 5 ,1 62 .03 7 5 - 1 74 9 Important Information Netherlands(NL) 146 - 156.4875, 156.8375-161.9625,162.0375 - 174 Poland(PL) 147.8 - 147.975, 150.05 - 151.625, 151.775 - 156, 157.425 - 159.9, 159.9 - 160.6, 160.975 - 161.475, 162.05 - 164.475, 167.5 - 168.5, 169.825 - 174 Portugal (PT) 148 - 149.9,150.05 - 156.4875 , 156.8375 - 174 Romania(RO) 160.975 - 161.125,161.275 - 161.475,164.05 - 169.4, 146 - 149,149.55 - 149.8,150.05 - 156,159.175 - 160.6, Slovakia(SK) Slovenia(SI) Spain(ES) Sweden(SE) 169.6125 - 174 146 - 149.9, 150.05 - 153.5625, 155.5125 - 156, 156.8375 -
146 -156.4875, 156.9375 - 161.9625, 162.0375 - 174 146 - 149.9, 150.05 -156.4875, 156.5625 - 156.7625, 156.8375 - 174 146.05 - 147, 150.05 - 151,156.8375 - 162.0375,162.025 -
163,164 - 171,172 - 174 137.975 - 138.2,139.51875 - 140.98125, United Kingdom (UK) 143 - 144,148.01875 - 148.98125,153.025 - 153.475, 154 - 155,157.205 - 165.0375,158 - 165,165.05 - 173.0875, 10 Important Information Please read this manual carefully before use. Packing List Alert Icons Caution:Indicates situations that could cause data loss or damage to your products. Note: Indicates tips that can help you make better use of your products. Please unpack carefully and check that all items listed below are received. If any item is missing or damaged ,please contact your dealer. Radio Unit Battery Charger Caution!
Restricted to occupational use to satisfy FCC RF exposure limits. Power Adapter Antenna Belt clip Manual 1 1 Charging Indicator LED Indicator Charging Status Red LED flashes slowly Standby (no load) Red LED glows Charging Orange LED glows 90% charged Green LED glows Fully charged Red LED flashes rapidly Failure Before Use Before Use radio Charge the Battery This radio is built in Li-ion battery .In order to prevent from damaging and comply with the warranty, use only the charger and battery specified by Excera.The following figure shows the steps for charging. Charging Diagram Procedures 1.Plug the other end of the power adapter into the rear jack of the charger.See arrow. 2.Connect the power adapter to AC socket,See arrow. 3.Place the radio with the battery attached,or the battery alone, into the charger.See arrow. 4.The charging process initiates when LED glows red,and is completed when LED glows green. 12 Before Use Attaching the Batttery Attaching Antenna 1.Insert the battery into top of the radio .see arrow. 2.Slightly press the bottom of the battery until a click is heard. See arrow. Plug the antenna to antenna pedestal,turn the antenna clockwise to fasten it . Note:
To remove the battery ,turn off the radio first.Then slide the battery latch upwards to unlock the battery. Note:
Turn off the radio before removing .To remove the antenna,rotate it counter-clockwise. 13 Before Use Attaching the Belt Clip Attaching the audio accessory/Programming Cable 1.Remove the screws from the back of radio. 2.Align the screw holes on the belt clip with those on the radio's body ,and then tighten the screws. 1.Open the accessory jack cover as the arrow shown. 2.Align the plug with accessory jack. 3.Tighten the screw on the plug. Note:
To remove the belt clip,loosen the screws. 14 Note:
To remove the accessory ,loosen the screws. Caution:
When you are using an external accessory , Waterproof performance of the radio may get affected. Before Use Product Controls No. Part Name No. Part Name No. Part Name SK1 (Side 1 Key) PTT Key Sk2 (Side 2 Key) Channel/Group Selector Knob Radio On-off/ Volume Control Knob LED Indicator Speaker LCD Display Menu Key Accessory Jack Setting Key Answer/ Calling Key P1 Speaker Hang Up /Home Key P2 Up and down Key Numeric Key Antenna TK key Belt Clip Battery 1 5 Before Use LED Indicator Status Icons LED Indicator Radio Status Icon Icon Name LED flashes green slowly. Standby(no load) LED flashes green rapidly. Upgrading or powering on LED glows green. Receiving LED flashes Red slowly. Low power warnning LED flashes red rapidly. LED glows red. Receiving Transmitting LED flashes orange slowly. Scanning LED flashes orange rapidly. Receiving LED glows orange. After voice communication ends,you can hold down the PTT key to talk while the LED is glowing orange. 16 Signal Strength Icon New Message Icon , Inbox Icon is full Scan Icon High Power Icon Low Power Icon Battery Strength Icon Accessory Icon Roam Icon GPS Icon Missed Call Icon Product Function and Operations Operation Mode Time and Date Display Setting This radio supports three operation Mode :DMR Trunking mode,MPT Trunking mode and Conventional mode(Digital and Analog).Switching Methods:
Use this function to modify this radio Date and Time. Press SettingKey to access Radio Setting-Date and Timeinterface to modify the Date and Time. Press the Setting Key to access Function Setting- Mode Setting and select a appropriate mode. Note:To access Digital Conventional Mode and Analog Conventional Mode to select Conventional Mode. Product Information Display You may achieve the following product information in this interface : Product Name,Product ID,Series Number,Frequency Range,Product Versions,Data Base Versions,Vocoder Versions, Lastest Programming Date and ESN Code and so on. Press Setting Key to access Product Information interface and review all the information. Alert Tone This function enable you set the following tones for your radio:Keypad Tone, Calling Tone,Called Tone, Function Tone,Warning Tone,Low Battery Toneand Test Message Tone Press SettingKey to access Radio Setting-Tone. Notes:The function tone is the alert tone of the programmable Key function On/Off and Switching ,such as High or Low power Switching and Zone Switching. Vibration To set whether to enable the vibration function base on user habit .To set this funcation via the CPS and Radio Menu setting. Backlight To set the backlight parameters of On/Off time,Off Type and Brightness Value. PressSettingkey to access Radio Setting-Display Setting . 1 7 Product Functions and Operations Menu Reset Time- out Timer(TOT) This radio supports Menu Reset function ,that is ,if you dont operate the menu for a predefined time period.This radio will automatically reback to the home screen. Hold down the Setting Key ,go to the Product Setting -Menu Reset Locking/unlocking the Keypad Through Key Combination ,Press Menu Key+ Key to lock and unlocking the keypad. Programming Key You are available to set the keys SK1SK2 and TK key as the shortcuts,such as High Power and Low Power switching and Zone Up and Zone Down,Squelch and Scan .This function only via the CPS setting. High Noise Reduction This function will effective reduce the noise under the high noise conduction. The noise reduction reach 25dB and makes voice will be clear. This function are available for your setting through the Programmable Key and radio Menu. Note: This feature default off .If this feature is enabled your speaking volume will be low. After this feature is enabled, you need speak near the MIC. 18 The purpose of TOT is to prevent any user from occupying a channel for an extended period.You can set the longest time of single pressing PTT. If the preset time expires ,the radio will terminate transmission automatically . This feature can be enabled via the programming software. GPS Positioning This function helps to get and upload the radio GPS location data(As shown). Press "Setting "Key ,to go to "Radio Information-
"Positioning System- Positioning System On/Offto turn On/Off GPS function. After GPS turn on,the radio status Positioning iron will display.If the GPS locate successfully ,the Iron change to from . Review the GPS positioning data from the Radio information- Positioning System- Radio Positioning Information. Product Functions and Operations Note:
To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to5cm from your mouth. Private Call Under DMR trunking mode, to set Private Call type via trunking system. FOACSU and OACSU FOACSU: While seting up a call,ring warn the calling party, and the called party receive the call through manual operation. OACSU : While seting up a call without any ring warn for the calling party ,and the called party receive the call through manual operation. Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs 1.Press Menu Key to go to Main Contacts. 2. Go toContacts List - Private Call Contacts,Or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call contacts you want to call. 4. Use P1 Key or PTT Key to Transmit a call. Through manual input 1.Input a Private Call number you want to call in home screen . 2. Use P1 Key ,PTT Key or select Dail Key # to transmit a Private Call. Transmitting a call through Redail List or Recall List. 1.Use P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen . 2. Use P1 Key, PTT Key or select Dail Key #to transmit a Private Call. Note:
Transmitting a Private Call Failed while products unregistered or Registration Failed . 19 Product Functions and Operations Receiving and Responding to a Private Call Call Duration After setting up a Private Call ,both the calling party and called party LCD will display call duration in time .Unit is Minutes :Seconds. (As shown) When a Private Call is received ,your radio automatic to receive a private call and sounds De,De,your radio will display the icon
(As shown above) . You may press P1 key or PTT key,coming call ring and icon will disappear. ,the first line display the coming call alias or ID.
(As shown above) Note:No need press the Receiving Key while setting automatic receiving and responding to a Private Call . The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time, this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. Voice Communication Ending a Call After setting up a private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT to talk. 20 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. DMR Functions and Operations Group Call Receiving and Responding to a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a call to the preset contacts. In the home screen,hold down PTT Key to transmitting a Group Call to the Group Call contacts preset for the current Channel.
(By the Group Knob to select a group you want to call). Transmitting a Group Call to the Contacts List or Call Logs. 1. Press Menu Key to Main Menu 2. Go to Contracts List--Group Call Contacts or Call Logs to access to outgoing/Incoming /Missed Call. 3. Use the Up/Down Key to select the Group Call Contacts you want to call. 4. Use P1 Key or PTT Key to transmitting a Group Call. Transmitting a Group Call through manual input 1.Input a Group Call number you want to call 2. Use PTT Key, P1 Key or Dail Keypad # to transmitting a Group Call. Transmitting a call through recall List or Call Logs 1. Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2. Use P1 key or PTT Key to transmitting a Group Call. When a Group Call is received,your radio will display the icon and have "De"alert tone. Press P1 or PTT Key,the incoming call iron will disappear . Late Access After Group Call set up to the end,those following type radio havent ended will join in this Group Call such as :
Raio just powering on , Radio just roams from other basestation or radio just releases from other group . Voice Call After seting up a call ,hold down PTT key to initiate a call when the calling party and the called party are in the PTT allowed interface. 21 DMR Functions and Operations Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown) All Call Two types of All Call are Team All Call and Whole Network All Call. The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time ,this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end a Group Call and access this group by Late Access. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the time expires silence period . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. 22 Team All Call 999 is the last one Group Call number in this team , When you initiate a Team All Call,all member in this team will receive and respond to this call . Three methods are aviable for transmitting a Team All Call :Transmitting a call to preset contacts ,transmitting a call through group call contacts or manual input number . The specific operation is the same as the Group Call. Whole Network All Call When you initiate a Whole Network Call ,and all the member will join in this call ,1981,1982 are Whole Network Call number. The three methods are available for transmitting a Whole Network Call:transmitting a call to the preset contacts , transmitting a call through Group Call Contacts or through manual input (Add * key befor 1981 or 1982 ). DMR Functions and Operations Emergency Call DMR Republic Network Phone Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ).Use P1 key, PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call .Only the calling party has the rights to speech. You may initiate a Broadcast Call through manual input .(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set Priority Call level:
Low ,Middle ,High or Preemption Call .You may initiate Priority Call through manual dail (Add *8* before number).Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. The calling with Public Network Phone is called Public Network Call.Network Phone Call have fixed phone call and mobile phone. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Such as013112345678 Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 0013112345678 DMR-MPT Call Base on the associated DMR-MPT group call number configured by basestation , you can achieve DMR trunking mode radio call DMR trunking mode radio each other. DMR trunking radio transmit a DMR-MPT call In DMR trunking mode ,you may transmit a DMR-MPT Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.
(Specific operation is the same as group call) 23 DMR Functions and Operations Contacts List To access to this menu,Press Menu Key to Main Menu and select Contacts List . 1Private Call Contacts You can save up to 256 entries in the private Call Contacts list . To access this item, select"Contacts-Private Call Contacts" or through Private Call List shortcut key for the contacts list via CPS configuration. a) To review ,modify or delete any one of contacts on list. b) If you want to delete all contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
2Group Call Contacts You can save up to 256 entries in group Call Contacts list . To access list throughContacts List -Group Call Contacts. a)To review the details of any contacts on the list ,just like alias and ID information. 24 3Public Network Contacts You can save up to 256 entries in the Public Network Contacts. To access this item through "Contacts List-Public Network Contacts"
a) To review ,modify or delete any one of contacts on list. b) If you want to delete all Contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
4New Contacts You can add a Private Call Contacts and Public Network Contacts to Contacts List . The New Private Call Contacts will save to Private Call Contacts List automatically . The New Public Network Contacts will save to Public Network Contact List automatically . a)The New Private Contact number must be unique. b)The alias of each Private Call Contacts save up to 16 characters,the available number is 8 figure [NumberID must conform to the rules of dial-up]. c)The alias of each Public Network Contacts save up to 16 characters, the available numbeic is 18 figures
[NumberID must conform to the rules of dial-up]. Note:You can switch input method through # key when input contacts alias. DMR Functions and Operations Message To access this item,press Menu key to go to main menu to selectmessage. 1Inbox The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages ,radio will appear notes Inbox will be full, please delete messageand the earliest message will be overwritten by the latest one automatically. 2Outbox The Outbox can save up 100 sent messages. Each message will appear appropriate Iron to note message send successfully or not . a) When the message sent successfully,the icon""will appear. b) When the message sent unsuccessful,the icon"!" will appear and please send again. When the OutBox is full,the earliest message will be overwriten by the latest one automatically. 3Drafts The Drafts can save up to 10 drafts messages into Drafts. When the Drafts is full, the earliest message will be overwritten by the latest one automatically. 4New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5Preset message Under this option there are some text messages
(10 entries at most )preset by your dealer.You can choose and send any entry. 6Status Msg There are some text message(95 entries at most ) preset by your dealer in this menu. You can select and send directly . The status Msg is status code. 25 DMR Functions and Operations Call Logs Press Menu Key to access Main Menu and then selectCall Logs. This radio can save up to 200 call entries.When the entries list is full.The earliest entry will be over written by latest one automatically.To view, delete, or delete all after selecting one call entries . Redail List All outgoing call list will be save in the Redial List . To access this item,Use P1 key in home screen
(As shown) . Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Redial List and Callback List Use P1 Key and P2 Key to access "Redail List "and"
Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be over written by latest one. Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen
(As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. 26 DMR Functions and Operations Vehicle Inquiry Status Filing To access this item ,press Menu Key to access Main Menu to select Public security --Vehicle information ". Press Menu Key to access Main Menu to select ApplicationsStatus Filing. You can input the vehicle license number and sent it to dataspace when you want to inquiry it .You also can review it from the history record. When the feature is enabled,the control center or other radio holder will master your working status etc.
[Such as:on the job ,off the job or just leave the job]. ID Inquiry You may process this function quickly through Shortcut Key Setting Menu. Filing Address Setting: You may send your status to your assigned receiver through Filing Address Setting . You can input ID number to the ID editing interface and send it to dataspace when you want to inquiry it .You also can review it from the history record. 27 MPT Trunking Functions and Operations To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5to 5 centimeters away from your month . Receiving and Responding to a Private Call Private Call Transmitting a Private Call You may transmit a Private Call through the following methods. When transmitting a Private Call ,this radio will set up calling automatically . Transmitting a call through Contacts and Call Logs 1.Press Menu Key to go to Main Menu 2. Go toContacts List - Private Call Contacts List,Or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call Contacts you want to call. 4. Use P1 Key or PTT Key to transmit a call Through Manual Input 1.Input a Private Call number you want to call in home screen. 2. Use P1 Key ,PTT Key or select dail Key # to transmit a Private Call. Transmitting a Private Call through Redail List or Recall List. 1.Press P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen. 2. Use P1 Key or PTT Key to transmit a Private Call. Note:
Transmitting a Private Call failed while products unregistered or registration failed . 28 When a Private Call is received ,your radio automatic to transmit a Private Call and sounds De,De,your radio will display the icon. (As shown above). You may press P1 key or PTT key,coming call Ring and icon will disappear. The first line display the coming call alias or ID
(As shown above). Voice Communication After setting up a Private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT Key to talk. MPT Trunking Function and Opertaions Call Duration Group Call After setting up a private call ,Both the calling party LCD and called party LCD will display Call Duration in time . Unit is Minutes :Seconds(As shown). When a Private Call is received ,your radio automatic to receive a private call and sounds De,De,your radio will display the icon
(As shown above) . You may hold down P1 key or PTT key,coming call ring and icon are disappeared.The first line display the coming call alias or ID.(As shown above) Note:No need hold down the Receiving Key while setting automatic receiving and responding to a Private Call . Ending Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. You may transmit a Group Call through any of the following methods. Transmit a call to the preset contacts. Hold down PTT Key to transmit a Group Call to a Group Call contacts preset for the current channel in home screen.
(By the Group Knob to select a group you want to call) Transmitting a Group Call to Contracts List--Contacts 1. Press Menu Key to Main Menu 2. Go toContracts List--Contacts 3. Use the Up/Down Key to select the Group Call contacts you want to call. 4. Use P1 Key or PTT Key to transmit a group call. Transmitting a Group Call through manual input 1.Input a group call number you want to call in the home screen. 2. Press PTT Key,P1 Key or Dail Keypad # to transmit a group call Transmitting a call through Redail List or Call Backlist 1. Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2. Use P1 key or PTT Key to transmit a group call. 29 MPT Trunking Function and Opertaions Receiving and Responding to a Group Call Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown) When a Group Call is received ,your radio set up call automatically and sounds De,your radio will display the icon .
(As shown above) The first line display the coming call alias or ID. Late Access After set up group call,this radio allows the member havent joined in this group transmit this call during calling . Voice Communication After set up a Group Call ,Both the calling party and the called party are in the PTT allowing interface. You can hold down PTT key to transmit a call. 30 The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time , this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end Group Call and access this group throughLate Access MPT Trunking Functions and Operations Ending a Call Emergency Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999is the last one Group Call number in this team ,When you initiate a team All Call,all member in this team will receive and respond to this call . Three methods are aviaible for transmitting a Team All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number . The specific operation is the same as the Group Call. System All Call When you transmit a System All Call ,all user in this system will join in this call. 1981is the number of System All Call. Three methods are aviailable for transmitting a System All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number .
(Add * Key before 1981). Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ). Use P1 key ,PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call . Only the calling party has the rights of speech. You may initiate Broadcast Call through manual input .
(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set a Priority Call level:Low ,Middle ,High or Preempted Call . You may initiate Priority Call through manual dail
(Add *8* before number). Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. 31 MPT Trunking Functions and Operations MPT Public Network Calling The calling with Public network phone is called MPT public network Call. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as 00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Such as 013112345678 Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 0013112345678 MPT-DMR Call Base on the appropriate MPT-DMR group call number figurated by basestation ,you can achieve MPT trunking radio call DMR trunking mode radio each other. MPT trunking radio transmit a MPT-DMR call In MPT trunking mode ,you may transmit a MPT-DMR Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.(Specific operation is the same as group call) Note: In DMR Trunking mode ,your radio must wait to the corresponding group.
(No need wait in this group when the DMR corresponding group is the responsing group ). 32 DMR trucking mode radio initiate a call to DMR-MPT is the same as the above operations. Receiving and Responding to a Call In DMR trunking mode ,When a group call /private call is received , your radio set up calling automatically and a alert tonDe sounds. The group alias or ID mumber will display on the first line of screen and private calling group name or private ID number will display on the last line. . Late Access After setting up group call,this radio allows the member havent joined in this group transmit this call during calling . Call Logs This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be over written by latest one automatically. To view, delete, or delete all after selecting one call entries . MPT Trunking Functions and Operations Redial List and Callback List Use P1 P2 key to access "Redail List "and"Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be overwritten by latest one. Redail List All outgoing call list will be save in the Redial List . Use P1 key to access this item in home screen.
(As shown) Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen
(As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. 33 Digital Conventional Functions and Operations Private Call,Group Call and all Call Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs. 1. Go to"Contacts List-Contacts ",Or go to "Call Logs" and access to the Outgoing/Incoming/Missed list. 2.Use Up /Down Key to select a Private Call Contacts you want to call. 3.Hold down PTT Key to transmit a Private Call through manual input 1.Go to" Contacts-Manual Dial 2.Input a Private Call number you want to call. 3.Hold down the PTT key to transmit a Private Call. Transmitting a Group Call You may transmit a Group Call through any of the following methods. Transmitting a Call through Contacts List orCall Log. 1.Go toContacts List-Contacts or throughCallLogto go to Outgoing/Incoming /Missed Call. 2.Use the Up/Down Key to select a Group Call contacts you want to call. 3.Hold down PTT key to select a Group Call Contacts you want to call. 34 Transmitting an All Call You may transmit a private and an All Call through any of the following methods. Transmitting an All Call through Contacts List or Call Log. 1.Go toContact List-Contactsor throughCall Logto go to Outgoing/Incoming /Missed Call list. 2.Use the Up/Down Key to select an All Call contacts you want to call. 3.Hold down PTT key to Transmit an All Call. Note:All call ID is a fixed ID. Emergency Call Meet an emergency, you can use this function to search companion or control center for help. If you need in a certain channel enabled on emergency call function, you must configure via programming software. This channel is relevant to one call ,only press"TK"key for long time to transmit a emengency call . Digital Conventional Functions and Operations Message To access the Menu,press Menu key to go to Main Menu to selectmessage. 1Inbox This radio can save the received messages into Inbox. The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages, this radio will appear notesInbox will be full, please delete messageand the earliest message will be over written by the latest one automatically. 2Outbox This radio can save the sent messages into Outbox. Each message will appear appropriate Iron to note message send successfully or not . aWhen the message sent successfully, the icon""will appear. bWhen the message sent unsuccessful, the icon""
will appear and please send again. The OutBox can save up to 100 sent messages. When the OutBox is full,the earliest message will be overwriten by the lastest one automatically. 3Drafts This radio can save up the edited message into Drafts. The Drafts can save up to 10 draft message.When the Drafts is full, the earliest message will be over written by the latest one automatically. 4New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5Preset Message Under this option there are some text messages(10 entries at most )preset by your dealer.You can choose and send any entry. 6Status Msg Under this option there are some text message(95 entri es at most ) preset by your dealer.You can choose and send any entry .The status Msg is status code. 35 Digital Conventional Functions and Operations Call Logs Zone Zone is a channel group,you can list the same channel in a zone. This function will help you manage the current channel. This radio supports up to 16 zones. Each zone up to 32 channels. You can select your desired zone as following methods. 1You can use this menu to select your desired zone To access ZonePress Up/Down key to select the Zone,then press OK Key to switch to the desired zone. 2You can use the programming Key to select your desired zone. If you preset Zone Up /Zone Down shortcut key, press this key to switch to desired zone. To access this menu,press Menu key to Main Menu and select"Call Logs,or press the shortcut key for Call Logs directly. This radio can save up to 200 call entries. When the entries list is full, the earliest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry ,you can perform any of these operations :hold down the PTT key to initiate a call, add it to Contact List ,or delete it . To delete all entries in the Outgoing /Iincoming/Missed list at a time,select Call Logs-Outgoing /Incoming/Missed-Delete All. 36 Analog Conventional Functions and Operations Squelch Level You can select the squelch Level by menu from Strengthen , Normal and Always On . Or press Squelch level Switching programmable Key to switch the level. This radio default at Norma generally.Strengthen requires the receipt signal high enough to turn on the speaker . When the level set at Normal (Squelch level is 0) this radio will turn on the speaker directly automatically and sounds the background voice . 37 Optional Accessories The following items are the main optional accessories for the product. Consult your local dealer for more other accessories. 3400 mAh Battery EB342L Programming Cable EPC01 Wireless PTT EPTTB01 Bluetooth Headset EEWB03E Speaker Microphone
(Shoulder) EMRN011 C-Shell Earset EEHN011 Police Full Bone Conduction Headset EEBN011 Fireman Full Bone Conduction Headset EEBN021 1-Wire Earpiece with Transparent Acoustic Tube EEAN011 2-Wire Earpiece with Transparent Acoustic Tube EEAN021 Multi-unit Charger EMC702L Caution: Use the accessories specified by the Company only. Otherwise, the Company shall not be liable for losses or damages arising out of use of unauthorized accessories. 38 Troubleshooting Phenomena Analysis Solution The Radio Can not be powered on. The Radio can not be regisitered. The battery may be improperly installed Remove the battey and attach it again. The battery may run out Recharge or replace the battery The battery may suffer from poor contact caused by dirtied or damaged battery contacts Clean the battery contacts, if the problem can not be solved, contact your dealer or authorized service center for inspection and repair. The radio can not detect the basestaion signal. Make sure the radio in base station effective signal range. The radio is not the basestation legal user ,can not be regisitered. Contact person who are in charge of this base station,make sure the radio are the legal user of base station NMS Repeated registration During receiving signal is discontinuous. Make sure the radio in base station effective signal range. During receiving signal is weak. Make sure the radio in base station effective signal range. The Radio Can not transmit and respond call. No voice when transmiting and responding call. The radio ID may be repeated The responding party is inactive repeatly during calling. Signalis discontinuous,get access to transmitting again after signal is totally inactive. Contact person who are in charge of this base station, make sure no the radio ID are repeated of base station NMS. Make sure the radio in basestaion effective signalrange. During receiving signals, the voice is weak discontinuous or totally inactive. You can not communicate with other members Irrelevant communiction or noise is heard on the channel The battery strength may be too low. Recharge or replace the battery. The volume may be set to a low level. Increase the volume by Volume Control Knob. The antenna may be get loose or may be improperly installed. The speaker may be blocked or damaged Power off the radio ,and re-install the antenna. Clean surface of the speaker.If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The noise is too lound. You may suffer from external disturbance
(such as electromagnetic interference). Move to an open and flat area,and restart the radio. You may be at an unfavorable position.For example,your communication may be blocked by high buildings or frustrated in the underground areas. Stay away from equipment that may cause interference. If the above solutions can not fix your problems,or you may have some other queries,please contact us or your local dealer for more technical support. 39 Warranty and Maintains Scope of Warranty Ep8100 radio and acessories. Warranty Details 1.From the date of purchase and without any artificial damage, Warranty varies based on product types . We will provide 36 months warranty service for main radios and 12 months warranty service for battery ,charger ,adapter and other standard accessories etc. 2.Completes Warranty Card or provides valid original invoices or receipts for warranty judgment .This invoice or receipt shall indicate radio accessories, radio serial number ,purchase date and amount. 3.Products problem caused by non-artificial can return, exchange or repair within 7 days. 15 days can be a replacement or repair, more than 15 days and within the warranty can be free repair. 4.We provide life-long maintenance service for customer .For products beyond the warranty, we still can continue to provide repair and maintenance services and will charge for those service. Non-Warranty Service 1 .Defect or damage is due to improper use of the product, including but not limited to the defects and damage caused by using this product without complying with the warning or user manual. 2.Defect or damage due to remake, change and disassembly or make use of non-original accessory or battery without the authorization of Simoco. 3.Defect or damage is due to force majeure (earthquake, flood disaster, fire disaster, etc.) 4.Cannot produce valid warranty certifications (Warranty Card, Invoice or Receipt etc.) 5.By the rational judgment of Simoco, serial number code label, the accessory date code label or relevant Simoco a sign of a product has been removed, defaced or altered. 6.Fair wear and tear. 7.Battery in the following circumstances:
1)Any artificial damage or unsealed phenomenon of battery case seal. 2)Defect or damage due to the charging or using at variance with the products prescribed. 40 Disclaimer The company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied ,modified,translated,or distributed in any manner without the express written permission of us. 41 Warranty Card Purchase Information Customer Name:
Customer Phone:
Customer Address:
Purchase Date:
Radio Information Model Number:
Serial Number:
l P e a s e t e a r f r o m t h e D o t t e d l i n e Note:
This warranty card applies to after-sale and maintenance services for the product and accessories described above. You must provide this warranty card and purchase invoice in order to get warranty services. The Company does not assume liability for damages caused by human factors. For more details, contact your local dealer.
1 2 3 4 5 6 | Users Manual | Users Manual | 3.08 MiB |
USERS MANUAL Digital Portable Radio EP8100 VHF Contents Important Information RF Energy Exposure Information Operation Safety Recommendations Radio Saftety Information and RF Radiation Information Disabled Frequency Packing List Before Use Ready to Use Product Controls LED Iindicator Status Icons Product Functions and Operations Operation Mode Produt Information Display Time and Date Setting Alert Tone Vibration Backlight Menue Reset Locking/Unlocking the Keypad Programmable Keys 3 4 5 7 7 7 8 8 11 12 12 13 13 13 13 13 13 13 14 14 14 High Noise Reduction Time-out-Timer(TOT) GPS Positioning DMR Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call DMR Public Network Call DMR-MPT Call Contacts Message Status Message Call Logs Redail List and Callback List Vehicle Inquiry ID Inquiry Status Filing 14 14 14 15 15 17 18 19 19 19 19 19 19 20 21 21 22 22 23 23 23 1 Optional Accessories Troubleshooting Warranty and Maintains Scope of Warranty Warranty Contents Non of Warranty Disclaimer Warranty Card 34 35 36 36 36 36 37 38 Contents MPT Trunking Functions and Operations Private Call Group Call All Call Emergency Call Broadcast Call Priority Call Dispatch Station Call MPT Pubic Network Call MPT-DMR Call Call Logs Redail and Callback List Digital Conventional Functions and Operations Private Call,Group Call and All Call Emergency Call Information Call Logs Zone Analog Conventional Functions and Operations DMO and RMO Mode Squelch Level 2 24 24 25 27 27 27 27 27 28 28 28 29 30 30 30 31 32 32 33 33 33 Important Information Note:
Ic Note : Cet Appareil Est Conforme La Partie 15 Des Rglements De La Fcc Et Aux Normes Rss De Lindustrie Du Canada. Son Fonctionnement Est Soumis Aux Deux Conditions Suivantes : (1) Cet Appareil Ne Doit Pas Causer Des Interfrences Nuisibles, Et (2) Cet Appareil Doit Accepter Toute Interfrence Reue, Y Compris Les Interfrences Qui Peuvent Provoquer Un Fonctionnement Indsirable.. Le Fabricant N'est Pas Responsable Des Toutes Interfrences Radio Ou Tlvision Causes Par Des Modifications Non Autorises Apportes Cet Appareil. De Telles Modifications Peuvent Empcher Lutilisateur Dutiliser L'appareil. Ic Note:
This Device Complies With Part 15 Of The Fcc Rules And Industry Canada License-exempt Rss Standard(s). Operation Is Subject To The Following Two Conditions: (1) This Device May Not Cause Harmful Interference, And (2) This Device Must Accept Any Interference Received, Including Interference That May Cause Undesired Operation. The Manufacturer Is Not Responsible For Any Radio Or Tv Interference Caused By Unauthorized Modifications Or Change To This Equipment. Such Modifications Or Change Could Void The Users Authority To Operate The Equipment. The Users Manual Or Instruction Manual For An Intentional Or Unintentional Radiator Shall Caution The User That Changes Or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void The User's Authority To Operate The Equipment. In Cases Where The Manual Is Provided Only In A Form Other Than Paper, Such As On A Computer Disk Or Over The Internet, The Information Required By This Section May Be Included In The Manual In That Alternative Form, Provided The User Can Reasonably Be Expected To Have The Capability To Access Information In That Form. 3 Important Information RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements Ibefore using the two-way portable radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form.
!
WARNING
!
CAUTION This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to remain below RF exposure limits. This radio is NOT authorized for general population, consumer, or any other use. Changes or modifications not expressly approved by Shenzhen Excera Technology Co., Ltd.could void the user's authority to operate the equipment. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Refer to the following websites for more information on what RF energy exposure is and how to control exposure to assure compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov./SLTC/radiofrequencyradiation/index.html 4 Important Information Federal Communications Commission Regulations Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC RF energy exposure limits for two-way portable radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. The radio has an RF exposure product label. Also, the Product Safety Manual and this Operators Manual include information and operating instructions required to control RF exposure and to satisfy compliance requirements. Operation Safety Recommendations Occupational Safety Guidelines And Safety Training Information To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to the following basic guidelines:
The push-to-talk button should only be depressed when intending to send a voice message. The radio should only be used for necessary work-related communications. The radio should only be used by authorized and trained personnel. It should never be operated by children. Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should service the radio. Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. 5 Important Information Radio Frequency Interference FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and, 2. This device must accept any interference received, including interference that may cause undesired operation. Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Adapter shall be installed near the equipment and shall be easily accessible. The max operating of the device is 55. RadioFrequencyEnergyTopreventburnsorrelatedphysicalinjuryfromradiofrequency energy, do not operate the transmitter when anyone outside of the vehicle is within the minimum safe distance about 5mm. EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 199/5/EC.Please note that the above information is applicable to EU countries only. 6 Important Information Please read this manual carefully before use. Alert Icons Caution:Indicates situations that could cause data loss or damage to your products. Note: Indicates tips that can help you make better use of your products. Packing List Please unpack carefully and check that all items listed below are received. If any item is missing or damaged ,please contact your dealer. Radio Unit Battery Charger Caution!
Restricted to occupational use to satisfy FCC RF exposure limits. Power Adapter Antenna Belt clip Manual 7 Before Use Charging Indicator LED Indicator Charging Status Red LED flashes slowly Standby (no load) Red LED glows Charging Orange LED glows 90% charged Green LED glows Fully charged Red LED flashes rapidly Failure Before Use radio Charge the Battery This radio is built in Li-ion battery .In order to prevent from damaging and comply with the warranty, use only the charger and battery specified by Excera.The following figure shows the steps for charging. Charging Diagram Procedures 1.Plug the other end of the power adapter into the rear jack of the charger.See arrow. 2.Connect the power adapter to AC socket,See arrow. 3.Place the radio with the battery attached,or the battery alone, into the charger.See arrow. 4.The charging process initiates when LED glows red,and is completed when LED glows green. 8 Before Use Attaching the Batttery 1.Insert the battery into top of the radio .see arrow. 2.Slightly press the bottom of the battery until a click is heard. See arrow. Attaching Antenna Plug the antenna to antenna pedestal,turn the antenna clockwise to fasten it . Note:
To remove the battery ,turn off the radio first.Then slide the battery latch upwards to unlock the battery. Note:
Turn off the radio before removing .To remove the antenna,rotate it counter-clockwise. 9 Before Use Attaching the Belt Clip 1.Remove the screws from the back of radio. 2.Align the screw holes on the belt clip with those on the radio's body ,and then tighten the screws. Attaching the audio accessory/Programming Cable 1.Open the accessory jack cover as the arrow shown. 2.Align the plug with accessory jack. 3.Tighten the screw on the plug. Note:
To remove the belt clip,loosen the screws. 10 Note:
To remove the accessory ,loosen the screws. Caution:
When you are using an external accessory , Waterproof performance of the radio may get affected. Before Use Product Controls No. Part Name No. Part Name No. SK1 (Side 1 Key) PTT Key Sk2 (Side 2 Key) Channel/Group Selector Knob Radio On-off/ Volume Control Knob LED Indicator Speaker LCD Display Menu Key Answer/ Calling Key P1 Speaker Numeric Key Antenna TK key Part Name Accessory Jack Setting Key Hang Up /Home Key P2 Up and down Key Belt Clip Battery 11 Before Use LED Indicator Status Icons LED Indicator Radio Status Icon Icon Name LED flashes green slowly. Standby(no load) LED flashes green rapidly. Upgrading or powering on LED glows green. LED flashes Red slowly. LED flashes red rapidly. LED glows red. LED flashes orange slowly. LED flashes orange rapidly. Receiving Low power warnning Receiving Transmitting Scanning Receiving LED glows orange. After voice communication ends,you can hold down the PTT key to talk while the LED is glowing orange. Signal Strength Icon New Message Icon , Inbox Icon is full Scan Icon High Power Icon Low Power Icon Battery Strength Icon Accessory Icon Roam Icon GPS Icon Missed Call Icon 12 Product Function and Operations Operation Mode Time and Date Display Setting This radio supports three operation Mode :DMR Trunking mode,MPT Trunking mode and Conventional mode(Digital and Analog).Switching Methods:
Use this function to modify this radio Date and Time. Press SettingKey to access Radio Setting-Date and Timeinterface to modify the Date and Time. Press the Setting Key to access Function Setting- Mode Setting and select a appropriate mode. Note:To access Digital Conventional Mode and Analog Conventional Mode to select Conventional Mode. Product Information Display You may achieve the following product information in this interface : Product Name,Product ID,Series Number,Frequency Range,Product Versions,Data Base Versions,Vocoder Versions, Lastest Programming Date and ESN Code and so on. Press Setting Key to access Product Information interface and review all the information. Alert Tone This function enable you set the following tones for your radio:Keypad Tone, Calling Tone,Called Tone, Function Tone,Warning Tone,Low Battery Toneand Test Message Tone Press SettingKey to access Radio Setting-Tone. Notes:The function tone is the alert tone of the programmable Key function On/Off and Switching ,such as High or Low power Switching and Zone Switching. Vibration To set whether to enable the vibration function base on user habit .To set this funcation via the CPS and Radio Menu setting. Backlight To set the backlight parameters of On/Off time,Off Type and Brightness Value. PressSettingkey to access Radio Setting-Display Setting . 1 3 Product Functions and Operations Menu Reset Time- out Timer(TOT) This radio supports Menu Reset function ,that is ,if you dont operate the menu for a predefined time period.This radio will automatically reback to the home screen. Hold down the Setting Key ,go to the Product Setting -Menu Reset Locking/unlocking the Keypad Through Key Combination ,Press Menu Key+ Key to lock and unlocking the keypad. Programming Key You are available to set the keys SK1SK2 and TK key as the shortcuts,such as High Power and Low Power switching and Zone Up and Zone Down,Squelch and Scan .This function only via the CPS setting. High Noise Reduction This function will effective reduce the noise under the high noise conduction. The noise reduction reach 25dB and makes voice will be clear. This function are available for your setting through the Programmable Key and radio Menu. Note: This feature default off .If this feature is enabled your speaking volume will be low. After this feature is enabled, you need speak near the MIC. 14 The purpose of TOT is to prevent any user from occupying a channel for an extended period.You can set the longest time of single pressing PTT. If the preset time expires ,the radio will terminate transmission automatically . This feature can be enabled via the programming software. GPS Positioning This function helps to get and upload the radio GPS location data(As shown). Press "Setting "Key ,to go to "Radio Information-
"Positioning System- Positioning System On/Offto turn On/Off GPS function. After GPS turn on,the radio status Positioning iron will display.If the GPS locate successfully ,the Iron change to from . Review the GPS positioning data from the Radio information- Positioning System- Radio Positioning Information. Product Functions and Operations Note:
To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to5cm from your mouth. Private Call Under DMR trunking mode, to set Private Call type via trunking system. FOACSU and OACSU FOACSU: While seting up a call,ring warn the calling party, and the called party receive the call through manual operation. OACSU : While seting up a call without any ring warn for the calling party ,and the called party receive the call through manual operation. Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs 1.Press Menu Key to go to Main Contacts. 2. Go toContacts List - Private Call Contacts,Or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call contacts you want to call. 4. Use P1 Key or PTT Key to Transmit a call. Through manual input 1.Input a Private Call number you want to call in home screen . 2. Use P1 Key ,PTT Key or select Dail Key # to transmit a Private Call. Transmitting a call through Redail List or Recall List. 1.Use P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen . 2. Use P1 Key, PTT Key or select Dail Key #to transmit a Private Call. Note:
Transmitting a Private Call Failed while products unregistered or Registration Failed . 15 Product Functions and Operations Receiving and Responding to a Private Call Call Duration After setting up a Private Call ,both the calling party and called party LCD will display call duration in time .Unit is Minutes :Seconds. (As shown) When a Private Call is received ,your radio automatic to receive a private call and sounds De,De,your radio will display the icon
(As shown above) . You may press P1 key or PTT key,coming call ring and icon will disappear. ,the first line display the coming call alias or ID.
(As shown above) Note:No need press the Receiving Key while setting automatic receiving and responding to a Private Call . Voice Communication After setting up a private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT to talk. 16 The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time, this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. DMR Functions and Operations Group Call Receiving and Responding to a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a call to the preset contacts. In the home screen,hold down PTT Key to transmitting a Group Call to the Group Call contacts preset for the current Channel.
(By the Group Knob to select a group you want to call). Transmitting a Group Call to the Contacts List or Call Logs. 1. Press Menu Key to Main Menu 2. Go to Contracts List--Group Call Contacts or Call Logs to access to outgoing/Incoming /Missed Call. 3. Use the Up/Down Key to select the Group Call Contacts you want to call. 4. Use P1 Key or PTT Key to transmitting a Group Call. Transmitting a Group Call through manual input 1.Input a Group Call number you want to call 2. Use PTT Key, P1 Key or Dail Keypad # to transmitting a Group Call. Transmitting a call through recall List or Call Logs 1. Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2. Use P1 key or PTT Key to transmitting a Group Call. When a Group Call is received,your radio will display the icon and have "De"alert tone. Press P1 or PTT Key,the incoming call iron will disappear . Late Access After Group Call set up to the end,those following type radio havent ended will join in this Group Call such as :
Raio just powering on , Radio just roams from other basestation or radio just releases from other group . Voice Call After seting up a call ,hold down PTT key to initiate a call when the calling party and the called party are in the PTT allowed interface. 17 DMR Functions and Operations Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown) All Call Two types of All Call are Team All Call and Whole Network All Call. The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time ,this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end a Group Call and access this group by Late Access. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the time expires silence period . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. 18 Team All Call 999 is the last one Group Call number in this team , When you initiate a Team All Call,all member in this team will receive and respond to this call . Three methods are aviable for transmitting a Team All Call :Transmitting a call to preset contacts ,transmitting a call through group call contacts or manual input number . The specific operation is the same as the Group Call. Whole Network All Call When you initiate a Whole Network Call ,and all the member will join in this call ,1981,1982 are Whole Network Call number. The three methods are available for transmitting a Whole Network Call:transmitting a call to the preset contacts , transmitting a call through Group Call Contacts or through manual input (Add * key befor 1981 or 1982 ). DMR Functions and Operations Emergency Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ).Use P1 key, PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call .Only the calling party has the rights to speech. You may initiate a Broadcast Call through manual input .(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set Priority Call level:
Low ,Middle ,High or Preemption Call .You may initiate Priority Call through manual dail (Add *8* before number).Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. DMR Republic Network Phone Call The calling with Public Network Phone is called Public Network Call.Network Phone Call have fixed phone call and mobile phone. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as013112345678 Such as 0013112345678 DMR-MPT Call Base on the associated DMR-MPT group call number configured by basestation , you can achieve DMR trunking mode radio call DMR trunking mode radio each other. DMR trunking radio transmit a DMR-MPT call In DMR trunking mode ,you may transmit a DMR-MPT Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.
(Specific operation is the same as group call) 19 DMR Functions and Operations Contacts List To access to this menu,Press Menu Key to Main Menu and select Contacts List . 1Private Call Contacts You can save up to 256 entries in the private Call Contacts list . To access this item, select"Contacts-Private Call Contacts" or through Private Call List shortcut key for the contacts list via CPS configuration. a) To review ,modify or delete any one of contacts on list. b) If you want to delete all contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
2Group Call Contacts You can save up to 256 entries in group Call Contacts list . To access list throughContacts List -Group Call Contacts. a)To review the details of any contacts on the list ,just like alias and ID information. 20 3Public Network Contacts You can save up to 256 entries in the Public Network Contacts. To access this item through "Contacts List-Public Network Contacts"
a) To review ,modify or delete any one of contacts on list. b) If you want to delete all Contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All"
4New Contacts You can add a Private Call Contacts and Public Network Contacts to Contacts List . The New Private Call Contacts will save to Private Call Contacts List automatically . The New Public Network Contacts will save to Public Network Contact List automatically . a)The New Private Contact number must be unique. b)The alias of each Private Call Contacts save up to 16 characters,the available number is 8 figure [NumberID must conform to the rules of dial-up]. c)The alias of each Public Network Contacts save up to 16 characters, the available numbeic is 18 figures
[NumberID must conform to the rules of dial-up]. Note:You can switch input method through # key when input contacts alias. DMR Functions and Operations Message To access this item,press Menu key to go to main menu to selectmessage. 1Inbox The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages ,radio will appear notes Inbox will be full, please delete messageand the earliest message will be overwritten by the latest one automatically. 2Outbox The Outbox can save up 100 sent messages. Each message will appear appropriate Iron to note message send successfully or not . a) When the message sent successfully,the icon""will appear. b) When the message sent unsuccessful,the icon"!" will appear and please send again. When the OutBox is full,the earliest message will be overwriten by the latest one automatically. 3Drafts The Drafts can save up to 10 drafts messages into Drafts. When the Drafts is full, the earliest message will be overwritten by the latest one automatically. 4New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5Preset message Under this option there are some text messages
(10 entries at most )preset by your dealer.You can choose and send any entry. 6Status Msg There are some text message(95 entries at most ) preset by your dealer in this menu. You can select and send directly . The status Msg is status code. 21 DMR Functions and Operations Call Logs Press Menu Key to access Main Menu and then selectCall Logs. This radio can save up to 200 call entries.When the entries list is full.The earliest entry will be over written by latest one automatically.To view, delete, or delete all after selecting one call entries . Redail List All outgoing call list will be save in the Redial List . To access this item,Use P1 key in home screen
(As shown) . Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Redial List and Callback List Use P1 Key and P2 Key to access "Redail List "and"
Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be over written by latest one. Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen
(As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. 22 DMR Functions and Operations Vehicle Inquiry Status Filing To access this item ,press Menu Key to access Main Menu to select Public security --Vehicle information ". Press Menu Key to access Main Menu to select ApplicationsStatus Filing. You can input the vehicle license number and sent it to dataspace when you want to inquiry it .You also can review it from the history record. ID Inquiry When the feature is enabled,the control center or other radio holder will master your working status etc.
[Such as:on the job ,off the job or just leave the job]. You may process this function quickly through Shortcut Key Setting Menu. Filing Address Setting: You may send your status to your assigned receiver through Filing Address Setting . You can input ID number to the ID editing interface and send it to dataspace when you want to inquiry it .You also can review it from the history record. 23 MPT Trunking Functions and Operations To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5to 5 centimeters away from your month . Receiving and Responding to a Private Call Private Call Transmitting a Private Call You may transmit a Private Call through the following methods. When transmitting a Private Call ,this radio will set up calling automatically . Transmitting a call through Contacts and Call Logs 1.Press Menu Key to go to Main Menu 2. Go toContacts List - Private Call Contacts List,Or go to
"Call Logs" and access the outgoing /Incoming/Missed list. 3. Use the Up/Down Key to select the Private Call Contacts you want to call. 4. Use P1 Key or PTT Key to transmit a call Through Manual Input 1.Input a Private Call number you want to call in home screen. 2. Use P1 Key ,PTT Key or select dail Key # to transmit a Private Call. Transmitting a Private Call through Redail List or Recall List. 1.Press P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen. 2. Use P1 Key or PTT Key to transmit a Private Call. Note:
Transmitting a Private Call failed while products unregistered or registration failed . 24 When a Private Call is received ,your radio automatic to transmit a Private Call and sounds De,De,your radio will display the icon. (As shown above). You may press P1 key or PTT key,coming call Ring and icon will disappear. The first line display the coming call alias or ID
(As shown above). Voice Communication After setting up a Private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT Key to talk. MPT Trunking Function and Opertaions Call Duration Group Call After setting up a private call ,Both the calling party LCD and called party LCD will display Call Duration in time . Unit is Minutes :Seconds(As shown). When a Private Call is received ,your radio automatic to receive a private call and sounds De,De,your radio will display the icon
(As shown above) . You may hold down P1 key or PTT key,coming call ring and icon are disappeared.The first line display the coming call alias or ID.(As shown above) Note:No need hold down the Receiving Key while setting automatic receiving and responding to a Private Call . Ending Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. You may transmit a Group Call through any of the following methods. Transmit a call to the preset contacts. Hold down PTT Key to transmit a Group Call to a Group Call contacts preset for the current channel in home screen.
(By the Group Knob to select a group you want to call) Transmitting a Group Call to Contracts List--Contacts 1. Press Menu Key to Main Menu 2. Go toContracts List--Contacts 3. Use the Up/Down Key to select the Group Call contacts you want to call. 4. Use P1 Key or PTT Key to transmit a group call. Transmitting a Group Call through manual input 1.Input a group call number you want to call in the home screen. 2. Press PTT Key,P1 Key or Dail Keypad # to transmit a group call Transmitting a call through Redail List or Call Backlist 1. Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2. Use P1 key or PTT Key to transmit a group call. 25 MPT Trunking Function and Opertaions Receiving and Responding to a Group Call Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is Minutes :Seconds.(As shown) When a Group Call is received ,your radio set up call automatically and sounds De,your radio will display the icon .
(As shown above) The first line display the coming call alias or ID. Late Access After set up group call,this radio allows the member havent joined in this group transmit this call during calling . Voice Communication After set up a Group Call ,Both the calling party and the called party are in the PTT allowing interface. You can hold down PTT key to transmit a call. 26 The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time , this radio will return back from calling and end this call. The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end Group Call and access this group throughLate Access MPT Trunking Functions and Operations Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999is the last one Group Call number in this team ,When you initiate a team All Call,all member in this team will receive and respond to this call . Three methods are aviaible for transmitting a Team All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number . The specific operation is the same as the Group Call. System All Call When you transmit a System All Call ,all user in this system will join in this call. 1981is the number of System All Call. Three methods are aviailable for transmitting a System All Call :
Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number .
(Add * Key before 1981). Emergency Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2. Through manual input number to initiate a Emergency Call.
(Add *9* before number ). Use P1 key ,PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call . Only the calling party has the rights of speech. You may initiate Broadcast Call through manual input .
(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set a Priority Call level:Low ,Middle ,High or Preempted Call . You may initiate Priority Call through manual dail
(Add *8* before number). Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. 27 MPT Trunking Functions and Operations MPT Public Network Calling The calling with Public network phone is called MPT public network Call. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Making Local Mobile Telephone Call Add 0 before telephone number Add 0 before telephone number Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 00755-33010296 Such as 013112345678 Such as 0013112345678 MPT-DMR Call Base on the appropriate MPT-DMR group call number figurated by basestation ,you can achieve MPT trunking radio call DMR trunking mode radio each other. MPT trunking radio transmit a MPT-DMR call In MPT trunking mode ,you may transmit a MPT-DMR Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.(Specific operation is the same as group call) Note: In DMR Trunking mode ,your radio must wait to the corresponding group.
(No need wait in this group when the DMR corresponding group is the responsing group ). 28 DMR trucking mode radio initiate a call to DMR-MPT is the same as the above operations. Receiving and Responding to a Call In DMR trunking mode ,When a group call /private call is received , your radio set up calling automatically and a alert tonDe sounds. The group alias or ID mumber will display on the first line of screen and private calling group name or private ID number will display on the last line. . Late Access After setting up group call,this radio allows the member havent joined in this group transmit this call during calling . Call Logs This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be over written by latest one automatically. To view, delete, or delete all after selecting one call entries . MPT Trunking Functions and Operations Redial List and Callback List Use P1 P2 key to access "Redail List "and"Callback List. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be overwritten by latest one. Redail List All outgoing call list will be save in the Redial List . Use P1 key to access this item in home screen.
(As shown) Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen
(As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. 29 Digital Conventional Functions and Operations Private Call,Group Call and all Call Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs. 1. Go to"Contacts List-Contacts ",Or go to "Call Logs" and access to the Outgoing/Incoming/Missed list. 2.Use Up /Down Key to select a Private Call Contacts you want to call. 3.Hold down PTT Key to transmit a Private Call through manual input 1.Go to" Contacts-Manual Dial 2.Input a Private Call number you want to call. 3.Hold down the PTT key to transmit a Private Call. Transmitting a Group Call You may transmit a Group Call through any of the following methods. Transmitting a Call through Contacts List orCall Log. 1.Go toContacts List-Contacts or throughCallLogto go to Outgoing/Incoming /Missed Call. 2.Use the Up/Down Key to select a Group Call contacts you want to call. 3.Hold down PTT key to select a Group Call Contacts you want to call. 30 Transmitting an All Call You may transmit a private and an All Call through any of the following methods. Transmitting an All Call through Contacts List or Call Log. 1.Go toContact List-Contactsor throughCall Logto go to Outgoing/Incoming /Missed Call list. 2.Use the Up/Down Key to select an All Call contacts you want to call. 3.Hold down PTT key to Transmit an All Call. Note:All call ID is a fixed ID. Emergency Call Meet an emergency, you can use this function to search companion or control center for help. If you need in a certain channel enabled on emergency call function, you must configure via programming software. This channel is relevant to one call ,only press"TK"key for long time to transmit a emengency call . Digital Conventional Functions and Operations Message To access the Menu,press Menu key to go to Main Menu to selectmessage. 1Inbox This radio can save the received messages into Inbox. The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages, this radio will appear notesInbox will be full, please delete messageand the earliest message will be over written by the latest one automatically. 2Outbox This radio can save the sent messages into Outbox. Each message will appear appropriate Iron to note message send successfully or not . aWhen the message sent successfully, the icon""will appear. bWhen the message sent unsuccessful, the icon""
will appear and please send again. The OutBox can save up to 100 sent messages. When the OutBox is full,the earliest message will be overwriten by the lastest one automatically. 3Drafts This radio can save up the edited message into Drafts. The Drafts can save up to 10 draft message.When the Drafts is full, the earliest message will be over written by the latest one automatically. 4New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5Preset Message Under this option there are some text messages(10 entries at most )preset by your dealer.You can choose and send any entry. 6Status Msg Under this option there are some text message(95 entri es at most ) preset by your dealer.You can choose and send any entry .The status Msg is status code. 31 Digital Conventional Functions and Operations Call Logs Zone Zone is a channel group,you can list the same channel in a zone. This function will help you manage the current channel. This radio supports up to 16 zones. Each zone up to 32 channels. You can select your desired zone as following methods. 1You can use this menu to select your desired zone To access ZonePress Up/Down key to select the Zone,then press OK Key to switch to the desired zone. 2You can use the programming Key to select your desired zone. If you preset Zone Up /Zone Down shortcut key, press this key to switch to desired zone. To access this menu,press Menu key to Main Menu and select"Call Logs,or press the shortcut key for Call Logs directly. This radio can save up to 200 call entries. When the entries list is full, the earliest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry ,you can perform any of these operations :hold down the PTT key to initiate a call, add it to Contact List ,or delete it . To delete all entries in the Outgoing /Iincoming/Missed list at a time,select Call Logs-Outgoing /Incoming/Missed-Delete All. 32 Analog Conventional Functions and Operations Squelch Level You can select the squelch Level by menu from Strengthen , Normal and Always On . Or press Squelch level Switching programmable Key to switch the level. This radio default at Norma generally.Strengthen requires the receipt signal high enough to turn on the speaker . When the level set at Normal (Squelch level is 0) this radio will turn on the speaker directly automatically and sounds the background voice . 33 Optional Accessories The following items are the main optional accessories for the product. Consult your local dealer for more other accessories. 3400 mAh Battery EB342L Programming Cable EPC01 Wireless PTT EPTTB01 Bluetooth Headset EEWB03E Speaker Microphone
(Shoulder) EMRN011 C-Shell Earset EEHN011 Police Full Bone Conduction Headset EEBN011 Fireman Full Bone Conduction Headset EEBN021 1-Wire Earpiece with Transparent Acoustic Tube EEAN011 2-Wire Earpiece with Transparent Acoustic Tube EEAN021 Multi-unit Charger EMC702L Caution: Use the accessories specified by the Company only. Otherwise, the Company shall not be liable for losses or damages arising out of use of unauthorized accessories. 34 Troubleshooting Phenomena Analysis Solution The battery may be improperly installed Remove the battey and attach it again. The Radio Can not be powered on. The battery may run out The battery may suffer from poor contact caused by dirtied or damaged battery contacts Recharge or replace the battery Clean the battery contacts, if the problem can not be solved, contact your dealer or authorized service center for inspection and repair. The Radio can not be regisitered. The radio can not detect the basestaion signal. The radio is not the basestation legal user ,can not be regisitered. Make sure the radio in base station effective signal range. Contact person who are in charge of this base station,make sure the radio are the legal user of base station NMS Repeated registration During receiving signal is discontinuous. Make sure the radio in base station effective signal range. The Radio Can not transmit and respond call. No voice when transmiting and responding call. The responding party is inactive repeatly during calling. During receiving signals, the voice is weak discontinuous or totally inactive. During receiving signal is weak. Make sure the radio in base station effective signal range. The radio ID may be repeated Signalis discontinuous,get access to transmitting again after signal is totally inactive. Contact person who are in charge of this base station, make sure no the radio ID are repeated of base station NMS. Make sure the radio in basestaion effective signalrange. The battery strength may be too low. Recharge or replace the battery. The volume may be set to a low level. The antenna may be get loose or may be improperly installed. The speaker may be blocked or damaged Increase the volume by Volume Control Knob. Power off the radio ,and re-install the antenna. Clean surface of the speaker.If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. You can not communicate with other members Irrelevant communiction or noise is heard on the channel The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The noise is too lound. You may suffer from external disturbance
(such as electromagnetic interference). You may be at an unfavorable position.For example,your communication may be blocked by high buildings or frustrated in the underground areas. Move to an open and flat area,and restart the radio. Stay away from equipment that may cause interference. If the above solutions can not fix your problems,or you may have some other queries,please contact us or your local dealer for more technical support. 35 Warranty and Maintains Scope of Warranty Ep8100 radio and acessories. Warranty Details 1.From the date of purchase and without any artificial damage, Warranty varies based on product types . We will provide 36 months warranty service for main radios and 12 months warranty service for battery ,charger ,adapter and other standard accessories etc. 2.Completes Warranty Card or provides valid original invoices or receipts for warranty judgment .This invoice or receipt shall indicate radio accessories, radio serial number ,purchase date and amount. 3.Products problem caused by non-artificial can return, exchange or repair within 7 days. 15 days can be a replacement or repair, more than 15 days and within the warranty can be free repair. 4.We provide life-long maintenance service for customer .For products beyond the warranty, we still can continue to provide repair and maintenance services and will charge for those service. Non-Warranty Service 1 .Defect or damage is due to improper use of the product, including but not limited to the defects and damage caused by using this product without complying with the warning or user manual. 2.Defect or damage due to remake, change and disassembly or make use of non-original accessory or battery without the authorization of Excera. 3.Defect or damage is due to force majeure (earthquake, flood disaster, fire disaster, etc.) 4.Cannot produce valid warranty certifications (Warranty Card, Invoice or Receipt etc.) 5.By the rational judgment of Excera, serial number code label, the accessory date code label or relevant Excera a sign of a product has been removed, defaced or altered. 6.Fair wear and tear. 7.Battery in the following circumstances:
1)Any artificial damage or unsealed phenomenon of battery case seal. 2)Defect or damage due to the charging or using at variance with the products prescribed. 36 Disclaimer The company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied ,modified,translated,or distributed in any manner without the express written permission of us. 37 Warranty Card Purchase Information:
Customer Name:
Customer Phone:
Customer Address:
Purchase Date:
Radio Information:
Radio Model Number:
Radio Serial Number:
l P e a s e t e a r f r o m t h e D o t t e d l i n e Note:
This Warranty Card is applicable to the above serial number radio and accessories service. Please properly keep the warranty card, please show this card and related invoice when enjoy this service. This card shall become effective after dealer affixed their seals to it . Any artificial damage belong to the non-warranty scope, please see the specific warranty scope as stated in "service policy". 38 While transmitting, always keep the antenna and the radio at least 2.5 cm (1 inches) from your body or face, as well as from any bystanders. Do not transmit for more than 50% of the total transceiver use time; transmitting over 50%
of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time
. Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by Excera. Use only Excera authorized accessories (antennas, battery packs, belt clips, Speaker/Mics or headsets etc.): When worn on the body, always place the radio in a Excera recommended clip or carrying case meant for this product. The use of other than recommended or approved body-worn accessories may result in RF exposure levels which exceed the FCCs occupational
/controlled environment RF exposure limits.
1 2 3 4 5 6 | Label | ID Label/Location Info | 611.57 KiB | December 15 2023 |
Digital Portable Radio MODEL: EP8100 VHF FREQUENCY: 136-174MHz EP8100-VHF-0G0B0000-0-E FCC ID: 2AE6C-EP8100VHF ESN: 0040430100000001 6 970537 430035 61C61P00001 MADE IN CHINA
1 2 3 4 5 6 | Label location | ID Label/Location Info | 181.71 KiB | December 15 2023 |
y @eEXCERA Digital Portable Radio MODEL: EP8100 VHF FREQUENCY: 136-174MHz EP8100-VHF-0G0B0000-0-E FCC ID: 2AE6C-EP8100VHF ESN: 0040430100000001 HL ps 611970537'430035 =
M0 MADE IN CHINA q 61C61P00001 y ATTENTION!
Restricted to occupational use to satisfy FCC RF exposure limits. See user manual for operating requirements.
1 2 3 4 5 6 | Agent letter | Cover Letter(s) | 168.16 KiB | December 15 2023 |
2023-12-01 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Huatongwei International Inspection Co., Ltd./ 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China / Xu Yang,. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Shenzhen Excera Technology Co., Ltd. / 201, Building B, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China. Agency agreement expiration date:
2024-11-30 By:
Title:
Signature Jubin Zhang Printed Project Manager On behalf of :
Shenzhen Excera Technology Co., Ltd. Telephone:
0755-33010298
1 2 3 4 5 6 | Attestation letter | Cover Letter(s) | 164.00 KiB | December 15 2023 |
Shenzhen Excera Technology Co., Ltd. Add: 201, Building B, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-33010298 Fax: 0755-33010296 Attestation letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Shenzhen Excera Technology Co., Ltd. hereby declare that our product: Digital Portable Radio FCC ID: 2AE6C-EP8100VHF is capable of supporting a voice channel and a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. DMR interphones bandwidth is 12.5 kHz, and it has a double time slot, one is the speech time slot, one is the data time slot, just language sequence is satisfied with 4800 bps/6.25 kHz BW. For Part 90 frequency user, the radio is disabled 25kHz channel bandwidth mode by radio firmware at factory in order to comply with FCC mandate for part 90 frequencies. Sincerely, Jubin Zhang Signature:
2023-12-01
1 2 3 4 5 6 | Confidentiality request letter | Cover Letter(s) | 181.98 KiB | December 15 2023 |
2023-12-01 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AE6C-EP8100VHF Product Name: Digital Portable Radio Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:
(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description PCB Layout PCB Placement BOM Tune up These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. By:
Title:
Signature Jubin Zhang Printed Project Manager On behalf of :
Shenzhen Excera Technology Co., Ltd. Telephone:
0755-33010298
1 2 3 4 5 6 | Covered equipment list attestaion | Attestation Statements | 250.23 KiB | December 15 2023 |
Shenzhen Excera Technology Co., Ltd. Covered Equipment Certification Attestation Letter 12/1/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AE6C-EP8100VHF
(Shenzhen Excera Technology Co., Ltd.) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment.
(Shenzhen Excera Technology Co., Ltd.) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:
Printed name: Jubin Zhang Title: Project Manager Company Name: Shenzhen Excera Technology Co., Ltd. Date: 12/1/2023
1 2 3 4 5 6 | Extended frequency letter | Cover Letter(s) | 307.75 KiB | December 15 2023 |
Shenzhen Excera Technology Co., Ltd. Add: 201, Building B, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-33010298 Fax: 0755-33010296 Extended Frequencies Justification Date: 2023-12-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The Digital Portable Radio, LMR with FCC ID: 2AE6C-EP8100VHF was designed to operate in the frequency bands 136~174MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for certification, Shenzhen Excera Technology Co., Ltd. is requesting that the FCC lists the frequencies 136~174MHz, under FCC Rules Parts 90 on the FCC Grant. Shenzhen Excera Technology Co., Ltd. attests that the radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCCs KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that its a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range MHz 136-150 150-150.05 150.05-150.8 150.8-162.0125 162.0125-173.2 173.2-173.4 173.4-174 Sincerely, Signature:
Typed or Printed Name: Jubin Zhang Email: jubin.zhang@excera.com.cn FCC Rule Part For Federal For Federal 90 90 90 90 For Federal
1 2 3 4 5 6 | Model different letter | Cover Letter(s) | 110.64 KiB | December 15 2023 |
Differences Declaration To whom concern, We company Shenzhen Excera Technology Co., Ltd. Here by declares:
The product model(s) EP8000 VHF is the same PCB layout, electronic schematic and Antenna with EP8100 VHF, which tested in Shenzhen Huatongwei International Inspection Co., Ltd., the only difference is different model names for commercial purpose. Sincerely yours, Name (in print): Jubin Zhang Company name: Shenzhen Excera Technology Co., Ltd. Company address: 201, Building B, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-33010298 E-Mail: jubin.zhang@excera.com.cn
1 2 3 4 5 6 | US agent attestation | Attestation Statements | 149.19 KiB | December 15 2023 |
Shenzhen Excera Technology Co., Ltd. U.S. Agent Designation for Service of Process -
Certification Attestation Letter December 6, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AE6C-EP8100VHF FRN: 0024703316 Per section 2.911(d)(7) of the FCC rules, ( Shenzhen Excera Technology Co., Ltd.) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process:
Company Name:
Physical U.S. Company Address:
Agent name:
Agent Email Address:
FRN:
Global Product Services and Consultation LLC 328 W Palm Ave. Monrovia, CA 91016 United States Mr Michael Chan cschanm@gmail.com 0033406703 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:
Signed:
Jubin Zhang 2023.12.06 16:51:39
+08'00'
Designated Agent Signed:
(Required, if different to Applicant):
Signed:
Printed name:
Title:
Company Name:
Date:
Jubin Zhang Project Manager Shenzhen Technology Co., Ltd. December 1, 2023 Excera Printed name: Mr Michael Chan Title:
Technical Director Company Global Product Services Name:
and Consultation LLC 2023-12-01 Date:
* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. SC3127725
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-12-15 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 2016-03-24 | 136 ~ 174 | TNF - Licensed Non-Broadcast Transmitter Held to Face | |
5 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 6 | Effective |
2023-12-15
|
||||
1 2 3 4 5 6 |
2016-03-24
|
|||||
1 2 3 4 5 6 | Applicant's complete, legal business name |
Shenzhen Excera Technology Co., Ltd.
|
||||
1 2 3 4 5 6 | FCC Registration Number (FRN) |
0024703316
|
||||
1 2 3 4 5 6 | Physical Address |
201, Building B, Tongfang Information Habour
|
||||
1 2 3 4 5 6 |
3rd Floor, Jiada R&D Building
|
|||||
1 2 3 4 5 6 |
Shenzhen, N/A 518057
|
|||||
1 2 3 4 5 6 |
Hi-Tech Park North, Nanshan District, Shenzhen, N/A
|
|||||
1 2 3 4 5 6 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 6 | TCB Application Email Address |
v******@nemko.com
|
||||
1 2 3 4 5 6 |
b******@baclcorp.com
|
|||||
1 2 3 4 5 6 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 5 6 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
1 2 3 4 5 6 |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|||||
app s | FCC ID | |||||
1 2 3 4 5 6 | Grantee Code |
2AE6C
|
||||
1 2 3 4 5 6 | Equipment Product Code |
EP8100VHF
|
||||
1 2 3 4 5 6 |
EP8100VHF
|
|||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 6 | Name |
J****** Z****
|
||||
1 2 3 4 5 6 |
S**** F********
|
|||||
1 2 3 4 5 6 | Title |
Project Manager
|
||||
1 2 3 4 5 6 |
Certification Engineer
|
|||||
1 2 3 4 5 6 | Telephone Number |
+86-7********
|
||||
1 2 3 4 5 6 | Fax Number |
+86-7********
|
||||
1 2 3 4 5 6 |
j******@excera.com.cn
|
|||||
1 2 3 4 5 6 |
s******@excera.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 6 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 6 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 6 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 4 5 6 | TNF - Licensed Non-Broadcast Transmitter Held to Face | |||||
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Portable Radio | ||||
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 6 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 6 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 6 | Grant Comments | Output power listed is conducted. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. | ||||
1 2 3 4 5 6 | Power output listed is rated conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt clip/ holster/accessories tested for this filing. End-users must be informed of the bodyworn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessories exposure conditions are 0.73 W/kg and 1.30 W/kg respectively. | |||||
1 2 3 4 5 6 | Power output listed is conducted at the antenna terminal. This transmitter has been tested for SAR compliance in Push-to-Talk and Body-Worn operating configurations with specific antennas, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device must operate at a duty factor not exceeding 50% and SAR compliance for body-worn operating configurations is limited to those described in this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values of hand held, body-worn accessories and simultaneous transmission conditions are 0.73 W/kg, 1.20 W/kg, and 1.58 W/kg, respectively at 50% duty factor. | |||||
1 2 3 4 5 6 | Output power listed is conducted. | |||||
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 6 | Firm Name |
Shenzhen Huatongwei International Inspection Co.,
|
||||
1 2 3 4 5 6 |
Bay Area Compliance Laboratory Corp. (Shenzhen)
|
|||||
1 2 3 4 5 6 | Name |
T******** J****
|
||||
1 2 3 4 5 6 |
J**** C******
|
|||||
1 2 3 4 5 6 | Telephone Number |
+86-7********
|
||||
1 2 3 4 5 6 |
08675******** Extension:
|
|||||
1 2 3 4 5 6 | Fax Number |
08675********
|
||||
1 2 3 4 5 6 |
t******@szhtw.com.cn
|
|||||
1 2 3 4 5 6 |
j******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0029000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | EF | 136 | 174 | 4.2 | 0.3 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
2 | 2 | 9 | EF | 136 | 174 | 1.2 | 0.3 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
2 | 3 | 9 | EF ES | 136 | 174 | 4.2 | 0.3 ppm | 7K10FXE | |||||||||||||||||||||||||||||||||
2 | 4 | 9 | EF ES | 136 | 174 | 1.2 | 0.3 ppm | 7K10FXE | |||||||||||||||||||||||||||||||||
2 | 5 | 9 | EF ES | 136 | 174 | 4.2 | 0.3 ppm | 7K10FXD | |||||||||||||||||||||||||||||||||
2 | 6 | 9 | EF ES | 136 | 174 | 1.2 | 0.3 ppm | 7K10FXD | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0030000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 9 | EF | 136 | 174 | 5 | 0.2 ppm | 9K92F3E | |||||||||||||||||||||||||||||||||
4 | 2 | 9 | EF ES | 136 | 174 | 5 | 0.2 ppm | 7K62FXD | |||||||||||||||||||||||||||||||||
4 | 3 | 9 | EF ES | 136 | 174 | 5 | 0.2 ppm | 7K62FXW | |||||||||||||||||||||||||||||||||
4 | 4 | 9 | EF | 136 | 174 | 1 | 0.2 ppm | 9K92F3E | |||||||||||||||||||||||||||||||||
4 | 5 | 9 | EF ES | 136 | 174 | 1 | 0.2 ppm | 7K62FXD | |||||||||||||||||||||||||||||||||
4 | 6 | 9 | EF ES | 136 | 174 | 1 | 0.2 ppm | 7K62FXW | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0089000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0089000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC