all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 823.83 KiB | July 08 2019 | |||
1 |
|
Agent Authorization | Cover Letter(s) | 12.79 KiB | July 08 2019 | |||
1 |
|
Declaration Letter of Model Difference | Cover Letter(s) | 50.54 KiB | July 08 2019 | |||
1 |
|
External Photos | External Photos | 671.21 KiB | July 08 2019 | |||
1 |
|
FCC Short & Long Term Confidentiality | Cover Letter(s) | 55.62 KiB | July 08 2019 | |||
1 |
|
Internal Photos | Internal Photos | 1.53 MiB | July 08 2019 | |||
1 |
|
LCS190610011AEA WPT 18 Report | Test Report | 658.87 KiB | July 08 2019 | |||
1 |
|
Label and Label Location | ID Label/Location Info | 81.44 KiB | July 08 2019 | |||
1 |
|
RF Exposure for WPT-FCC | RF Exposure Info | 978.15 KiB | July 08 2019 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 191.38 KiB | July 08 2019 |
1 | User Manual | Users Manual | 823.83 KiB | July 08 2019 |
SPECIFICATIONS 12V l t.mp IIILJmlnBllon 21000LUX
;,,80Ra C L.omow Cdd li9hl5SOOIC Tamp, DlmmlTyp!!
t LuminlllB Fl Sgradebrin touch dirmiar
,w SOOKwarmNllluhllr1:4 ImpM Th,ok yfu<p,<ehHIOQ Togramyo... occ P"'""'
hlhlpmpe,ty,Th,ak yo, T m e Item"""""'
Note:this
'lieldthedealers sea.II Warranty Card Am..Fro,reptalion o,m oat part o,,t 11,t. be ct,aadi..
.,, ra,,.1, lad unprop11r s. Appli blefor
...uerreyearrep:!llrsunder oo al,HAii..-oao yd adto.m et,ancompMpWI oompaay's
*Tl!A.oot ratdlY-,aad,aaoial use IJO=ag aahq,a Dam.. , eMdla .. ,,oo,taon fall.and 3)Coae,maba oooo
..rt,,baM 4}\MmaNY Inmata ra_, Is aot oom1ate,oop,rnhm date, 00 gshop m 5Featured oom maraa o,i, Hily ,ad the shlp,8sy notaardinAto the instn S Whmto fado,y ro, rap,t. Ghoudmelo,ra l=p paokod
.rynet fibllfothedamcausedtheusar themIf u111rodsassemble LED proplytoIdydam ... d,rlm hemldlty,es
"' .,,., A.ention lh, jam ao!Mtyt Iha tablede11k to avidlholampa uapow.... doaot =1-adJostiae
,oaEdl=m pdeclto= aaya::trk:uhcck
*Please to mainlaoo to= ,ay damage k, the M
* '"'"
,aedo ool p,t Iha lamp, dropp ,, out. edo oot p,I tho i,mp ,mo hlS h tempotureohlgh-hemldlty EHMronment sedo not bkol lhe LED tighturce stra toh,O In case
* lfa. ThepoweOrfXJWEpl,g break holamp holddaorrain ofth!! lami:i tiolder b he"""'"'jolat..l!S holamp holdmo...
"The abncrrn b-ofthoLEDIlgtbulb oeepulutthe power beWOndttlons This device may not cause harmful interference, and this devicemust accept any interference received, including FCC Statement This device complies with part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1)
(2) interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
(1)Increase the separation between the equipment and receiver.
(2)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(3)Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. OPERATION
*TouchohooIha dmg) GUIDE ON/OFF m Light mode A UP v Down INSTRUCTIONS CHARGING WIRELESS Put phona wiQIdmicalsnda,dca tha .p .. rg;lI;ndtartums to red andlOnescenshws n 1halphor aCgfiJ_, phooa a show. g paecheck phooe whether pet 1o the W.cha....dlyputphoneon the b<e hOI noworthedevswhelher with CHholcal
.... REPLACEMENT BATTERY Imitated lealh..-des,ga, FUNCTION
*Smatwirale chanchathesmart watch lphonwhichIS QI mlasscharging
*High quality ca" be esforlohme Adva,cad praclolo, alch;,ghnolo
;mdloathe, effect;oa. ma II n1enl b,l,t,tne",
*Touableslidilo, abdghtnass mtd;ffe,entl;gequkem-. 3colampemhm,to ge.(Cotrt,Wm lht,Nrallht) Calendar. sndard bshow mar realistic USE MANUAL
*Ins..-! u.., oo"Ptn,-hdinto the sketbehmd the l=p
& [Nerti1power111ymbox ie on!>, forthiemp, forllidee1r1eallf)l)liM The ranga of mdlvlty lolamp DiPLAYSCREEN IIRIGlfTNESS AUSTMENT be fold able lo 90"angla
*Lamp ann oao
*Plhodthalempsawheoyou adJUSlamp ann ang'\11 G
*Lampheadcao belod-abeto150'
aogle I
(It may be brnyou8M>djI 3pb,a Lamp dlght md rraosapho,ischastatus Calendar aod aJa,m sono M s SET MODE UP DOWN Day. ]
lo,-,n I HMy.,,-Mooth llywhea mod,."'" mdoo,stopop"at ea moImunitl!toit mod p5d=,key to switch Adjustsen light Date aod r;mo ,ett;,g Lin normalodP"set" key to aehttl,g
:
1,,.to movoouenre Pss, , aad 'd=" to settlag, e k'"'"'" '"tomatl dateehaog a. sattlao
...9.'"d a.mo. 4. oo,m,I d;,ptay. Bnclion l. In normal 2Ja ,,,.,,mode,,,.,. ,et.tho ,,m tim,, "'"'"'"
[ Hou,-MualSaoMExit 3.P=s ""p'aod dowc.. og 4J, aann mode, P,, '"' down'tot,moffa a,m '"d P...in sequenc nsnoo2eon s:heocom, to ala,m t me, wm ,;,,. 1 m,,1 soo= '"' ""' agam P ssanyKtooff c1lc1nn.
*Tra _,., lo ao,mal benaF and E dp,y. modmodetoactive alarm... mooss"downyto switch tachieventfuon, a armoC,coo,o 1neclhapo,adapte, te screerHdottho hlgho MgMoa lflThe11 pdCCO the SLu k betw12H'or'24H'
Thelhtflash;ag aad startag ep "'"" moblp,O1,111cha Thagnl lrl T..pha,bart,,ysy.dl,p.II ctiaes
(Only ownnrtillnof wireless thine is nIha. ind1iffllr funciicn 1f the mobile mdiradn, phooe I, ,q,lpp,d dielagaf moole a.hd wlh,o,wheaea,g,g) Green light , the ch"'lllno compete
1 | Agent Authorization | Cover Letter(s) | 12.79 KiB | July 08 2019 |
Shenzhen Feihe Electronics Co., Ltd Agent Authorization Company: Shenzhen Feihe Electronics Co., Ltd Address: 3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China Product Name: LED table lamp Trade Mark: N/A Model Number(s): U13Q1, U13Q,WL1042B-BB,IH-QI6004B FCC ID: 2AQRG-U13Q1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:
Date: 2019-08-05 Name:
Li Chen Title:
Engineer Company: Shenzhen Feihe Electronics Co., Ltd
1 | Declaration Letter of Model Difference | Cover Letter(s) | 50.54 KiB | July 08 2019 |
Add: 3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen Feihe Electronics Co., Ltd Shenzhen, China Tel: 86-755-33653690 Fax: 86-755-33653696 Date: 2019-08-05 Dear Sir/Madam, We, Shenzhen Feihe Electronics Co., Ltd Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:
Product name: LED table lamp Model No.: U13Q1, U13Q,WL1042B-BB,IH-QI6004B Sincerely, Clients name / title : Li Chen / Engineer Contact information / address : 3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China Tel: 86-755-33653690 Fax: 86-755-33653696 E-Mail: yangmei@szhanzhong.com
1 | External Photos | External Photos | 671.21 KiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 External Photographs of the EUT Fig. 1 Fig. 2 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 3 Fig. 4 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 5 Fig. 6 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 7 Fig. 8 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 4
1 | FCC Short & Long Term Confidentiality | Cover Letter(s) | 55.62 KiB | July 08 2019 |
Shenzhen Feihe Electronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019-08-05 Subject; Request for Confidentiality FCC ID: 2AQRG-U13Q1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: Li Chen Title: Engineer
1 | Internal Photos | Internal Photos | 1.53 MiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Internal Photographs of the EUT Fig. 1 Fig. 2 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 R=2cm Fig. 3 Fig. 4 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 5 Fig. 6 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 7 Fig. 8 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 9 Fig. 10 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 11 Fig. 12 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 6 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 13 Fig. 14 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 7 of 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Fig. 15 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 8 of 8
1 | LCS190610011AEA WPT 18 Report | Test Report | 658.87 KiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA FCC TEST REPORT FOR Shenzhen Feihe Electronics Co., Ltd LED table lamp Test Model: U13Q1 Additional Model No. : U13Q,WL1042B-BB,IH-QI6004B
: Shenzhen Feihe Electronics Co., Ltd
:
3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China
: Shenzhen LCS Compliance Testing Laboratory Ltd.
:
1/F., Xingyuan Industrial Park, Tongda Road, Baoan Avenue, Baoan District, Shenzhen, Guangdong, China
(+86)755-82591330
:
:
(+86)755-82591332
: www.LCS-cert.com
: webmaster@LCS-cert.com
: June 24, 2019
: 1
: Prototype
: June 24, 2019 ~ June 27, 2019
: July 03, 2019 Prepared for Address Prepared by Address Tel Fax Web Mail Date of receipt of test sample Number of tested samples Serial number Date of Test Date of Report This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA FCC TEST REPORT FCC CFR 47 PART 18: 2017 Report Reference No. ................. : LCS190610011AEA Date of Issue .................................. : July 03, 2019 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... :
1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Testing Location/ Procedure ..........
:
Full application of Harmonised standards Partial application of Harmonised standards Other standard testing method Applicants Name ......................... : Shenzhen Feihe Electronics Co., Ltd Address .......................................... :
3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China Test Specification Standard ......................................... : FCC CFR 47 PART 18: 2017 Test Report Form No...................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................. : LED table lamp Trade Mark ..................................... : N/A Test Model ...................................... : U13Q1 Ratings ........................................... :
Input: DC 12V/1.5A Wireless Charging Output:5W Result ........................................... : Positive Compiled by:
Supervised by:
Approved by:
Peter Xiao / File administrators Aking Jin / Technique principal Gavin Liang/ Manager This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA FCC -- TEST REPORT Test Report No. :
LCS190610011AEA Test Model........................
: U13Q1 EUT....................................
: LED table lamp July 03, 2019 Date of issue Applicant...........................
: Shenzhen Feihe Electronics Co., Ltd Address.............................. Telephone.......................... Fax.....................................
:
3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China
: /
: /
Manufacturer.....................
: Shenzhen Feihe Electronics Co., Ltd Address.............................. Telephone.......................... Fax.....................................
:
3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China
: /
: /
Factory..............................
: Shenzhen Feihe Electronics Co., Ltd Address.............................. Telephone.......................... Fax..................................... Test Result
:
3/F,Bldg 3, HongFa Innovative Park HuangMaBu Community, Baoan District, Shenzhen, China
: /
: /
Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA Revision History Issue Date July 03, 2019 Revisions Initial Issue Revised By Gavin Liang Revision 000 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA TABLE OF CONTENTS 1. GENERAL INFORMATION ........................................................................................................... 6 1.1 Description of Device (EUT) ................................................................................................................. 6 1.2 Support equipment List ......................................................................................................................... 6 1.3 External I/O Cable ................................................................................................................................. 6 1.4 Description of Test Facility ................................................................................................................... 6 1.5 Statement of the Measurement Uncertainty ...................................................................................... 7 1.6 Measurement Uncertainty .................................................................................................................... 7 1.7 Description of Test Modes .................................................................................................................... 7 2. TEST METHODOLOGY ................................................................................................................ 8 2.1 EUT Configuration ................................................................................................................................. 8 2.2 EUT Exercise .......................................................................................................................................... 8 2.3 General Test Procedures...................................................................................................................... 8 2.3.1 Conducted Emissions ........................................................................................................................ 8 2.3.2 Radiated Emissions ........................................................................................................................... 8 3. SYSTEM TEST CONFIGURATION ............................................................................................. 9 3.1 Justification ............................................................................................................................................. 9 3.2 EUT Exercise Software ......................................................................................................................... 9 3.3 Special Accessories .............................................................................................................................. 9 3.4 Block Diagram/Schematics .................................................................................................................. 9 3.5 Equipment Modifications ....................................................................................................................... 9 3.6 Test Setup ............................................................................................................................................... 9 4. SUMMARY OF TEST EQUIPMENT .......................................................................................... 10 5. SUMMARY OF TEST RESULT .................................................................................................. 11 6. POWER LINE CONDUCTED MEASUREMENT ..................................................................... 12 7. RADIATED EMISSION MEASUREMENT ................................................................................ 14 7.1. Block Diagram of Test Setup ............................................................................................................ 14 7.2. Radiated Emission Limit .................................................................................................................... 14 7.3. EUT Configuration on Measurement ............................................................................................... 14 7.4. Operating Condition of EUT .............................................................................................................. 15 7.5. Measuring Setting ............................................................................................................................... 15 7.6. Test Procedure .................................................................................................................................... 15 7.7. Test Results ......................................................................................................................................... 16 8. PHOTOGRAPHS OF TEST SETUP .......................................................................................... 19 9. EXTERNAL PHOTOGRAPHS OF THE EUT........................................................................... 19 10. INTERNAL PHOTOGRAPHS OF THE EUT .......................................................................... 19 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 1. GENERAL INFORMATION 1.1 Description of Device (EUT) EUT Test Model Model Number Model Declaration
: LED table lamp
: U13Q1
: U13Q1, U13Q,WL1042B-BB,IH-QI6004B
: PCB board, structure and internal of these model(s) are the same, So no additional models were tested. Hardware Version Software Version
: N/A
: N/A Operating Frequency Modulation Type Antenna Type
: 110.0~205.0KHz
: Continuous Wave
: Coil Antenna Ratings Input: DC 12V/1.5A
:
Wireless Charging Output:5W 1.2 Support equipment List Manufacturer Description Apple Inc. Mobile Phone Model iPhone X Dongguan Guanjin Electronics Adapter K25V120150U Serial Number Certificate
--
--
FCC ID SDOC Technology Co.,Ltd 1.3 External I/O Cable I/O Port Description DC IN Port Quantity 1 Cable N/A 1.4 Description of Test Facility FCC Registration Number is 254912. Industry Canada Registration Number is 9642A-1. EMSD Registration Number is ARCB0108. UL Registration Number is 100571-492. TUV SUD Registration Number is SCN1081. TUV RH Registration Number is UA 50296516-001. NVLAP Accreditation Code is 600167-0. FCC Designation Number is CN5024 CAB identifier: CN0071 The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 6 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 1.5 Statement of the Measurement Uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. To CISPR 16 4 Specification for radio disturbance and immunity measuring apparatus and methods Part 4:
Uncertainty in EMC Measurements and is documented in the LCS quality system acc. To DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. 1.6 Measurement Uncertainty Test Item Frequency Range Uncertainty Radiation Uncertainty
:
200MHz~1000MHz 9KHz~30MHz 30MHz~200MHz Conduction Uncertainty Power disturbance
:
:
1GHz~26.5GHz 26.5GHz~40GHz 150kHz~30MHz 30MHz~300MHz 3.10dB 2.96dB 3.10dB 3.80dB 3.90dB 1.63dB 1.60dB Note
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1). This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. 1.7 Description of Test Modes Equipment under test was operated during the measurement under the following conditions:
Charging mode Modulation Type: CW (Continuous Wave) Test Modes:
Mode 1 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: <1%) Mode 2 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: <50%) Mode 3 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: 100%) Mode 4 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: <1%) Mode 5 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: <50%) Mode 6 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: 100%) Note: All test modes were pre-tested, but we only recorded the worst case in this report. Record Pre-tested Pre-tested Pre-tested Pre-tested Pre-tested For AC conducted emission, pre-test at both AC 120V/60Hz and AC 240V/50Hz, recorded worst case;
For AC conducted emission, pre-test at both AC charge from power adapter and PC modes, recorded worst case. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 7 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with MP-5, and FCC CFR PART 18. 2.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 2.2 EUT Exercise The EUT was operated in the charging and compunction mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 18.305 and 18.307 under the FCC Rules Part 18. 2.3 General Test Procedures 2.3.1 Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in FCC MP-5 for Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using Quasi-peak and average detector modes. 2.3.2 Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in FCC MP-5 for radiated emission. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 8 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 3. SYSTEM TEST CONFIGURATION 3.1 Justification The system was configured for testing in a normal condition. 3.2 EUT Exercise Software N/A. 3.3 Special Accessories No. Equipment Manufacturer Model No. Serial No. Length 1 2 PC Power adapter Lenovo Lenovo Ideapad A131101550
/
CPA-A090 36200414 1.00m shielded/
unshielded Notes
/
SDOC unshielded SDOC 3.4 Block Diagram/Schematics Please refer to the related document. 3.5 Equipment Modifications Shenzhen LCS Compliance Testing Laboratory Ltd. has not done any modification on the EUT. 3.6 Test Setup Please refer to the test setup photo. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 9 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 4. SUMMARY OF TEST EQUIPMENT Ite m 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Equipment Manufacturer Model No. Serial No. Cal Date Due Date MXA Signal Analyzer Agilent N9020A MY4910004 0 2019-06-11 2020-06-10 SPECTRUM ANALYZER 3m Semi Anechoic R&S SIDT Chamber FRANKONIA FSP40 100503 2018-11-15 2019-11-14 SAC-3M 03CH03-HY 2019-06-12 2020-06-11 Positioning Controller EMI Test Software EMI Test Receiver Active Loop Antenna By-log Antenna Horn Antenna RF Cable-R03m MF AUDIX R&S SCHWARZBE CK SCHWARZBE CK SCHWARZBE CK Jye Bao RF Cable-HIGH SUHNER EMI Test Receiver Artificial Mains 10dB Attenuator R&S R&S SCHWARZBE CK MF-7082 E3 ESR 7 FMZB 1519B VULB916 3 BBHA 9120D RG142 SUCOFLE X 106 ESPI ENV216 MTS-IMP-
136
/
/
2019-06-12 2020-06-11 N/A N/A 101181 2019-06-12 2020-06-11 00005 2018-07-26 2019-07-25 9163-470 2018-07-26 2019-07-25 9120D-1925 2018-07-02 2019-07-01 CB021 2019-06-12 2020-06-11 03CH03-HY 2019-06-12 2020-06-11 101840 101288 2019-06-11 2020-06-10 2019-06-12 2020-06-11 261115-001-
0032 2019-06-11 2020-06-10 Note: All equipment is calibrated through CHINA CEPREI LABORATORY and GUANGZHOU LISAI CALIBRATION AND TEST CO., LTD. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 10 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 5. SUMMARY OF TEST RESULT Test Item Radiated Emission AC conducted emission FCC Rule Temperature Power source No. conditions conditions 18.305 (b) Nominal Nominal 18.307 (a) Nominal Nominal C NC NA NP Remark
-/-
-/-
Remark: The measurement uncertainty is not included in the test result. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 11 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 6. POWER LINE CONDUCTED MEASUREMENT 6.1. Block Diagram of Test Setup 6.2. Standard Applicable According to 18.307 (b): For all other part 18 consumer devices which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed 250 microvolts
(The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz). The limits at specific frequency range are listed as follows:
Frequency Range Limits (dBV)
(MHz) 0.15 to 0.50 0.50 to 5 5 to 30 Quasi-peak 66 to 56 56 60 Average 56 to 46 46 50
* Decreasing linearly with the logarithm of the frequency 6.3 Test Results PASS. The test data please refer to following page. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 12 of 19 EUT LISN EMI receiver Reference ground plane Vert. reference plane SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA Line Neutral
***Note: Pre-scan all modes and recorded the worst case results in this report. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 13 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 7. RADIATED EMISSION MEASUREMENT 7.1. Block Diagram of Test Setup 7.2. Radiated Emission Limit Except as provided elsewhere in this Subpart 18.305 (b), the field strength levels of emissions which lie outside the bands specified in 18.301, unless otherwise indicated, shall not exceed the following table:
Frequency MHz 0.009~30MHz 30~88 88~216 216~960 960~1000 Distance Meters 3 3 3 3 3 Field Strengths Limit dBV/m 103.5 40.0 43.5 46.0 54.0 Remark Quasi-peak Quasi-peak Quasi-peak Quasi-peak Quasi-peak Remark:
(1) Emission level dBV/m for 0.009~30MHz = 20log (15) + 40log (300/3) dBV/m;
(2) Calculated according FCC 18.305.
(3) The smaller limit shall apply at the cross point between two frequency bands.
(4) Distance is the distance in meters between the measuring instrument, antenna and the closest point of any part of the device or system. 7.3. EUT Configuration on Measurement This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 14 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA The following equipment are installed on Radiated Emission Measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 7.4. Operating Condition of EUT
(1) Setup the EUT as shown in Section 4.1.
(2) Let the EUT work in worst test mode (Mode 1) and measure it. 7.5. Measuring Setting The following table is the setting of spectrum analyzer and receiver. Receiver Parameter Attenuation Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency Setting Auto 9kHz~150kHz / RB 200Hz for QP/Average 150kHz~30MHz / RB 9kHz for QP/Average 30MHz~1000MHz / RB 100kHz for QP 7.6. Test Procedure 1) Sequence of testing 9 kHz to 30 MHz Setup:
--- The equipment was set up to simulate a typical usage like described in the user manual or described by manufacturer.
--- If the EUT is a tabletop system, a rotatable table with 0.8 m height is used.
--- If the EUT is a floor standing device, it is placed on the ground.
--- Auxiliary equipment and cables were positioned to simulate normal operation conditions.
--- The AC power port of the EUT (if available) is connected to a power outlet below the turntable.
--- The measurement distance is 3 meter.
--- The EUT was set into operation. Premeasurement:
--- The turntable rotates from 0 to 315 using 45 steps.
--- The antenna height is 0.8 meter.
--- At each turntable position the analyzer sweeps with peak detection to find the maximum of all emissions Final measurement:
--- Identified emissions during the premeasurement the software maximizes by rotating the turntable position (0 to 360) and by rotating the elevation axes (0 to 360).
--- The final measurement will be done in the position (turntable and elevation) causing the highest emissions with QPK detector.
--- The final levels, frequency, measuring time, bandwidth, turntable position, correction factor, margin to the limit and limit will be recorded. Also a plot with the graph of the premeasurement and the limit will be stored. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 15 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 2) Sequence of testing 30 MHz to 1 GHz Setup:
--- The equipment was set up to simulate a typical usage like described in the user manual or described by manufacturer.
--- If the EUT is a tabletop system, a table with 0.8 m height is used, which is placed on the ground plane.
--- If the EUT is a floor standing device, it is placed on the ground plane with insulation between both.
--- Auxiliary equipment and cables were positioned to simulate normal operation conditions
--- The AC power port of the EUT (if available) is connected to a power outlet below the turntable.
--- The measurement distance is 3 meter.
--- The EUT was set into operation. Premeasurement:
--- The turntable rotates from 0 to 315 using 45 steps.
--- The antenna is polarized vertical and horizontal.
--- The antenna height changes from 1 to 3 meter.
--- At each turntable position, antenna polarization and height the analyzer sweeps three times in peak to find the maximum of all emissions. Final measurement:
--- The final measurement will be performed with minimum the six highest peaks.
--- According to the maximum antenna and turntable positions of premeasurement the software maximize the peaks by changing turntable position ( 45) and antenna movement between 1 and 4 meter.
--- The final measurement will be done with QP detector with an EMI receiver.
--- The final levels, frequency, measuring time, bandwidth, antenna height, antenna polarization, turntable angle, correction factor, margin to the limit and limit will be recorded. Also a plot with the graph of the premeasurement with marked maximum final measurements and the limit will be stored. 7.7. Test Results PASS. Only report the worst test data (Mode 1) in test report;
The test data please refer to following page:
This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 16 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 0.009 MHz 30 MHz Remark:
Measured at 0 degree and 90 degree, recorded worst case at 90 degree. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 17 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 30 MHz 1000 MHz Horizontal Vertical Note:
1). Pre-scan all modes and recorded the worst case results in this report. 2). Emission level (dBuV/m) = 20 log Emission level (uV/m). 3). Corrected Reading: Antenna Factor + Cable Loss + Read Level = Level. This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 18 of 19 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Report No.:LCS190610011AEA 8. PHOTOGRAPHS OF TEST SETUP Please refer to separated files for Test Setup Photos of the EUT. 9. EXTERNAL PHOTOGRAPHS OF THE EUT Please refer to separated files for External Photos of the EUT. 10. INTERNAL PHOTOGRAPHS OF THE EUT Please refer to separated files for Internal Photos of the EUT.
-------------THE END OF REPORT-------------
This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 19 of 19
1 | Label and Label Location | ID Label/Location Info | 81.44 KiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:2AQRG-U13Q1 LABEL AND LOCATION LED table lamp Model No.: U13Q1 FCC ID: 2AQRG-U13Q1 Input: DC 12V/1.5A Wireless Charging Output:5W This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Made in China Size: L3.5cm*W3.5cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1
1 | RF Exposure for WPT-FCC | RF Exposure Info | 978.15 KiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 RF Exposure Evaluation Report 1. Product Information FCC ID:
Product Name Model Number Model Declaration Power Supply Modulation Type Frequency Range Operation Frequency Antenna Type Hardware version Software version Accessories Exposure category EUT Type Device Type 2AQRG-U13Q1 LED table lamp U13Q1,U13Q,WL1042B-BB,IH-QI6004B PCB board, structure and internal of these model(s) are the same, So no additional models were tested. Input: DC 12V/1.5A Wireless Charging Output:5W CW (Continuous Wave) 110 KHz - 205 KHz 128.0 KHz Coil Antenna N/A N/A iPhone X General population/uncontrolled environment Production Unit Mobile Device 2. Evaluation Method Per KDB 680106 D01 Section 3. RF Exposure Requirements;
1) Consumer wireless power transfer devices approved under Part 18 in some cases have to demonstrate compliance with RF exposure requirements. The potential for exposure must be assessed according to the operating configurations of the wireless system and the exposure conditions of users and bystanders. RF exposure must be evaluated with the client device(s) being charged by the primary at maximum output power. The RF exposure requirements must be determined in conjunction with the device operating characteristics, according to the mobile and portable exposure requirements in Section 2.1091 and Section 2.1093 of the rules. SAR and MPE limits do not cover the frequency range for wireless power transfer applications which operate below 100 kHz and 300 kHz respectively;
therefore, RF exposure compliance needs to be determined with respect to 1.1307 (c) and (d) of the FCC rules. 2) Based on the design and implementation of the power transfer application, it must be clearly identified if mobile or portable RF exposure conditions apply. Devices that are installed to provide separation of at least 20 cm from users and bystanders may qualify for mobile exposure conditions. For some conditions where users and bystanders may be exposed at closer than 20 cm, section 2.1091(d) (4) of the rules may apply. 3) For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 4) Portable exposure conditions from 100 kHz to 6 GHz are determined with respect to SAR requirements. Existing SAR systems and test procedures are generally intended for measurements above 100 MHz. While numerical modeling can be an alternative, the constraints of substantial computational resources at low frequencies could introduce further limitations. Under these circumstances, including operations below 100 kHz, the Commission may consider a combination of analytical analysis, field strength, radiated and conducted power measurements, in conjunction with some limited numerical modeling to assess compliance. 5) Depending on the operating frequency, existing SAR and MPE measurement procedures may be adapted to evaluate wireless power transfer devices for compliance with respect to mobile or portable exposure conditions. If the grantee or its test lab have any questions regarding RF exposure evaluation they should contact the FCC Laboratory with sufficient system operating configuration details to determine if RF exposure evaluation is necessary and, if required, how to apply specific test procedures. Below 100 MHz, when SAR testing is required and the device is operating at close proximity to persons, information on device design, implementation, operating configurations, exposure conditions of users and bystanders are needed to determine the evaluation and testing requirements. In addition, the influence of nearby objects may also need consideration according to the wireless power transfer system implementation; for example, the effects of placing the device, its coils or radiating elements on or near metallic surfaces 3. Evaluation Limit 3.1 Refer evaluation method ANSI C95.11999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 680106 D01 RF Exposure Wireless Charging Apps v03: RF Exposure Considerations for Low Power Consumer Wireless Power Transfer Applications FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices FCC CFR 47 part 18.107:Indusial, Scientific, and Medical Equipment 3.2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density Averaging Time
(mW/cm)
(minute) Limits for Occupational/Controlled Exposure 0.3-3.0 3.0-30 30-300 300-1,500 1,500-100,000 614 1842/f 61.4
/
/
1.63 4.89/f 0.163
/
/
*100
*900/f2 1.0 f/300 5 6 6 6 6 6 ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density Averaging Time
(mW/cm)
(minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 1.34-30 30-300 300-1,500 1,500-100,000 F=frequency in MHz 614 824/f 27.5
/
/
1.63 2.19/f 0.073
/
/
*100
*180/f2 0.2 f/1500 1.0 30 30 30 30 30
*=Plane-wave equivalent power density According to FCC KDB 680106 D01 Section 3. RF Exposure Requirements clause 3 the Emission-Limits in the frequency range from 100 KHz to 300 KHz should be assessed versus the limits at 300 KHz in Table 1 of CFR 47 Section1.310 as following (measured distance shall be 15cm from the center of the probe to the edge of the device):
Frequency 0.3 MHz 3.0 MHz E-Field V/m 614
*/*
A/m 1.613 3.0 MHz 30 MHz 824/f (=27.530MHz) 2.19/f (=0.07330MHz) A KDB inquire was required to determine/confirm the applicable limits below 100 KHz. B-Field uT 2.0
--
4. Test Setup Diagram ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 5. Test Equipment Equipment Manufacturer Model Serial no. Calibrated date Calibrated Due Exposure Level Tester B-Field Probe Narda Narda ELT-400 ELT-400 N-0713 M-1154 2019-06-17 2019-06-17 2020-06-16 2020-06-16 6. Measurement Procedure a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (15cm and 20cm) which is between the edges of the charger and the geometric center of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106D01v03. 7. Equipment Approval Considerations The EUT does comply with item 5.2 of KDB 680106 D01v03 as follows table;
Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes Output power from each primary coil is less than 15 watts The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Client device is placed directly in contact with the transmitter. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes Yes Yes The device operate in the frequency range 110.0 KHz - 205 KHz The maximum output power of the primary coil is less than 10W. The transfer system includes single coil that is able to detect receiver device. Client device is placed directly in contact with the transmitter. Yes Mobile exposure conditions only The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. In all other cases, unless excluded above, an RF exposure evaluation report must be reviewed and accepted through a KDB or PBA inquiry to enable authorization of the equipment. When evaluation is required to show compliance; for example, using field strength, power density, SAR measurements or computational modeling etc., the specific authorization requirements will be determined based on the results of the RF exposure evaluation. ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 8. E and H field Strength Test Modes:
Mode 1 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: <1%) Record Mode 2 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: <50%) Pre-tested Mode 3 AC/DC Adapter (12V/1.5A) + EUT + Mobile Phone (Battery Status: 100%) Pre-tested Mode 4 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: <1%) Mode 5 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: <50%) Mode 6 AC/DC Adapter (12V/1.5A) + EUT + Cup (Heating: 100%) Pre-tested Pre-tested Pre-tested Note: All test modes were pre-tested, but we only recorded the worst case in this report. E-Field Strength at 15 cm from the edges surrounding the EUT and 15cm from the top surface of the EUT Charging Battery Level Frequency Range
(MHz) Measured E-Field Strength Values (V/m) Test Test Test Test Test Position Position Position Position Position A B C D E 1%
50%
99%
0.1280 0.1280 0.1280 5.447 5.369 5.284 5.558 5.632 5.774 5.914 6.028 6.115 5.767 5.896 5.884 6.125 6.238 6.225 FCC E-Field Strength 50% Limits
(V/m) 307.0 307.0 307.0 FCC E-Field Strength Limits
(V/m) 614.0 614.0 614.0 H-Field Strength at 15 cm from the edges surrounding the EUTand 15cm from the top surface of the EUT Frequency Range
(MHz) 0.1280 0.1280 0.1280 Measured H-Field Strength Values (A/m) Test Test Test Test Test Position Position Position Position Position A 0.115 0.176 0.158 B 0.235 0.241 0.229 C 0.185 0.193 0.172 D 0.236 0.235 0.222 E 0.217 0.229 0.251 FCC H-Field Strength50
% Limits
(A/m) 0.815 0.815 0.815 FCC H-Field Strength Limits
(A/m) 1.63 1.63 1.63 Charging Battery Level 1%
50%
99%
H-Field Strength at 20cm from the top surface of the EUT Charging Battery Level 1%
50%
99%
Frequency Range
(MHz) 0.1280 0.1280 0.1280 Measured H-Field Strength Values (A/m) Test Position E 0.291 0.274 0.285 FCC H-Field Strength 50%
Limits (A/m) 0.815 0.815 0.815 FCC H-Field Strength Limits
(A/m) 1.63 1.63 1.63 ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1
) m
/
A
(
d e i F
-
H l 0.3 0.25 0.2 0.15 0.1 0.05 0 WPT RF Exposure_H-Field_Mobile 1.00%
50.00%
99.00%
Charging Battery Level Test Position A_10cm Test Position B_10cm Test Position C_10cm Test Position D_10cm Test Position E_10cm ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 6 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 9. Test Setup Photos 9.1. Test Position E - Exposure photo from top surface (20cm) 20cm
(TM1) 9.2. Test Position HE - Exposure photo from top surface (15cm) 15cm
(TM1) ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 7 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 9.3. Test Position A - Exposure photo from side edge surface-Rear 15cm
(TM1) 9.4. Test Position B - Exposure photo from side edge surface-Left 15cm
(TM1) ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 8 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 9.5. Test Position C - Exposure photo from side edge surface-Front 15cm
(TM1) 9.6. Test Position D - Exposure photo from side edge surface-Right 15cm
(TM1) ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 9 of 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 10. Conclusion A minimum safety distance of at 15 cm surrounding the device and 20 cm above the top surface of the device is required when the device is charging a smart phone. The detected emissions with a distance of 15 cm surrounding the device and 20 cm above the top surface of the device are below the limitations according to FCC KDB 680106 D01 Section 3. RF Exposure Requirement Clause 3. Revision 000 Revision History Issue Date July 03, 2019 Revisions Initial Issue Revised By Gavin Liang
.........................END OF REPORT......................... ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 10 of 10
1 | Test Setup Photos | Test Setup Photos | 191.38 KiB | July 08 2019 |
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Photographs of Test Setup Test Setup Photo(s) of Radiated Emissions Measurement Fig. 1 Fig. 2 _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AQRG-U13Q1 Test Setup Photo(s) of Power Line Conducted Emissions Measurement Fig. 4 _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-07 | 0.11 ~ 0.205 | 8CC - Part 18 Consumer Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-07
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Feihe Electronics Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0027732890
|
||||
1 | Physical Address |
3/F,Bldg 3, HongFa Innovative Park
|
||||
1 |
Shenzhen, N/A 518101
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AQRG
|
||||
1 | Equipment Product Code |
U13Q1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
L****** C******
|
||||
1 | Title |
Engineer
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
y******@szhanzhong.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen Feihe Electronics Co., Ltd
|
||||
1 | Physical Address |
China
|
||||
1 |
y******@szhanzhong.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | 8CC - Part 18 Consumer Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LED table lamp | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
||||
1 | Name |
G**** L******
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
g******@lcs-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 18 | 0.11000000 | 0.20500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC