USER MANUAL
(Ver.1.0) CAUTION: Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion. ATTENTION: Lisez toutes les instructions et les avertissements avant d'utiliser ce produit. L'utilisation inapproprie de ce produit peut entraner la dtrioration du produit, l'excs de chaleur, des fumes toxiques, incendie ou une explosion. Product: 4 ports fast charging station with wireless charge pad Model: 14573, FAC-WFC473B, NAXA NAP-5000, FAC-WFC473A, MIQ-SWC480A Input: 100-240VAC, 50/60Hz Fast Charge Output5Vdc/3A,9Vdc/2A,12Vdc/1.5A Ai Output:5Vdc/2.4A Type-C Output:5Vdc/2.4A Total Output:50W max Wireless Fast Charge Output:5W/10W 1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS CONSIGNES DE SCURIT IMPORTANTES - Conservez ces instructions DANGER - POUR RDUIRE LES RISQUES D'INCENDIE OU DE CHOC LECTRIQUE, SUIVEZ ATTENTIVEMENT CES INSTRUCTIONS 2. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Pour la connexion une alimentation pas aux Etats-Unis, utilisez un adaptateur de fixation de la configuration correcte pour la prise d'alimentation, si ncessaire. 3. Risk of Electric Shock. RISQUE DE CHOC LECTRIQUE. 4. For indoor use only. POUR UNE UTILISATION EN INTRIEUR. 5. Please check prior use, if output voltage and current of the power supply is suitable for the product. Se il vous plat vrifier avant l'utilisation, si la tension de sortie et le courant de l'alimentation est adapt au produit. 6. For information technology equipment use only. Pour l'utilisation des quipements de technologie d'information seulement. 7. The plug is used as disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible. La prise est utilise comme dispositif de dconnexion. La prise de courant doit tre installe prs de l'quipement et doit tre facilement accessible. 8. The cover may under no circumstances be opened. If the cover is damaged, then the power supply may no longer be used. Le couvercle peut en aucun cas tre ouvert. Si le couvercle est endommag, l'alimentation ne peut plus tre utilis. 9. Children should be supervised to ensure that they do not play with the appliance. Les enfants doivent tre surveills pour s'assurer qu'ils ne jouent pas avec l'appareil. Normal environmental conditions:
a) Altitude up to 2 000m;
b) Temperature 5 C to 25 C;
c) Storage environment: Temperature - 40-85C. Humidity 5-95%RH (do not have condensate) Operation:
1. Insert the USB cable in the USB port of the USB Power Supply and the other head of USB cable connect with the end of phone, or other charging rechargeable equipment. 2. Insert the plug of the USB power supply into AC power socket. 3. Pull out the USB power supply from AC power socket and then disconnect the charging rechargeable equipment for USB power supply in turns when the battery is full. Shenzhen Fenergy Technology Co., Ltd. 8/F King Dragon Temple Industrial Building A9, Fuyong Town, Bao'an District, Shenzhen, Guangdong 518103 -
China Tel: +755-33935290 FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.