Cant connect? Need help?
Wi-Fi Date Code: 05/19 Smart Aroma Diuser User Manual WE CAN HELP DO NOT RETURN THIS PRODUCT TO THE STORE Call 1-800-757-1440 Mon-Fri 9:00-5:00 EST (US) or email support@atomiusa.com Download Free APP Watch Video and point it at the QR Code Open your smartphone camera IMPORTANT SAFEGUARDS TO AVOID RISK OF ELECTRICAL SHOCK, always make sure the Smart Aroma Diuser is unplugged from the electrical outlet before relocating, servicing, or cleaning it. When using electrical appliances, basic safety precautions should always be followed to reduce the risk of re, electric shock, and / or injury to persons, including the following:
use only. any openings. 1. READ ALL INSTRUCTIONS BEFORE USING. 1. DO NOT move once the diuser has been lled with water. 2. DO NOT operate outdoors. This diuser is intended for indoor 3. Disconnect the diuser from power before cleaning. 4. DO NOT operate without water. Always have water in the base when operating. 5. Use only clean, cool water to ll the base. Do not use hot water. 6. DO NOT pour water into any openings other than the base. 7. DO NOT cover any openings on the unit or insert objects into 8. DO NOT aim mist directly at children, pets, walls, furniture or 9. Use only with the provided electrical cord. 10. ALWAYS plug and unplug diuser with dry hands to avoid 11. Never operate the diuser with a damaged cord or plug. 12. Always place the unit on a smooth, at, lint-free, non-metallic, waterproof and level surface. 13. Position the diuser away from direct sunlight. 14. Keep the cord away from heated surfaces and areas where it 15. Unplug the diuser when not in use and whenever you clean 1 could be walked on or tripped over. electrical appliances. or move the unit. electric shock. appropriately. Refer to cleaning instructions. 16. The diuser should not be left unattended in a closed room. 17. The diuser requires daily and weekly cleaning to operate 18. NEVER use detergents, solvents or abrasive agents to clean 19. Do not tilt, tip or attempt to empty or l the diuser while it is in operation. the diuser. Safety Warning is in operation. electrical outlet. Although your diuser is easy to operate, for your safety, the below warnings must be followed:
1. Do not place the diuser near a heat source. 2. Never leave the diuser unattended while connected to the 3. To avoid any accidents, never cover the lid when the diuser 4. Use the diuser on a smooth, at, lint-free, non-metallic, waterproof, and level surface away from water. 5. Do not unplug from the wall socket by pulling on the 6. The diuser must be unplugged:
A. Before either lling or emptying the base. D. If it appears to be faulty. B. Before any cleaning or maintenance is performed. C. After each use. supply cord. NOTE: This product is intended for HOUSEHOLD USE ONLY. SAVE THESE INSTRUCTIONS 2 Thank you for purchasing the atomi Smart Aroma Diuser Designed to ll the air with fragrance and moisture, the atomi Smart Aroma Diuser is a perfect tool for aromatic relaxation. Just add a few drops of your favorite essential oil with water in the tank and unwind. Control the Smart Aroma Diuser from anywhere at anytime using your smartphone. Inside the box youll nd:
Smart Aroma Diuser Power Supply User Manual Specications Power Supply Input: 100-240V~50/60Hz 0.4A Max Output: 24V --- 500mA Smart Aroma Diuser Input: 24V --- 500mA Working Frequency: 2.4MHz Tank Capacity: 400ML Watts12W 3 Getting to know the Smart Aroma Diuser The Smart Aroma Diuser uses ultrasonic waves to instantly vaporize water and essential oil in the tank, to produce a cool, dry fragrant mist. LOW Mist Press for low mode mist HIGH Mist Press for high mode mist Wi-Fi Long press to connect to Wi-Fi setup ON/OFF Powers ON/OFF Smart Aroma Diuser. LED Light Indicates which mist mode is selected. Before you begin 1. Know your Wi-Fi network and password. 2. Make sure your mobile device is running 3. Make sure youre connected to a 2.4GHz Wi-Fi network (atomi smart cant connect iOS 8 or higher or Android 4.1 or higher. to 5GHz networks). 4 Step 1:
Plug in Step 2:
Add Remove the outer cover and the water tank cover. Plug the Smart Aroma Diuser into Power Outlet. Using the measuring cup, carefully add cool water to the reservoir. Add desired essential oils to the water tank. NOTE: Do not exceed the maximum level. Do not add water while the diuser is on. 5 6 Step 3:
Download App Step 4:
Register Download the atomi smart app from the App Store or Google Play. Enter your mobile phone number or email address. 7 8 Step 5:
Add Device Log into the app. Select Add Device or click (+) at the top right corner of the devices screen. Choose Smart Aroma Diuser from the device list. Enter the verication code and create a password. 9 10 Step 6:
Wi-Fi Setup Hold the Wi-Fi button for 5 seconds until the indicator light rapidly blinks, then press Continue on the atomi smart app. Enter your Wi-Fi network and password. The atomi smart app will connect your device. 11 12 Spray Countdown Schedule Press to change mist spray intensity. 13 Sets a countdown to shut o spray. Sets weekly schedules to
t your lifestyle. 14 Cleaning and Maintaining your Smart Aroma Diuser CAUTION: Always be sure the Smart Aroma Diuser is switched OFF, unplugged before cleaning or attempting to store the item. Care and Cleaning After using 5-6 times, or 3-5 days, please clean the product as follow:
1. Unplug the unit from power supply and remove cover. 2. Pour out any remaining water from the tank. 3. Add a small amount of warm dish detergent, and wipe it gently, then use a cleaning cloth to dry it gently. 4. Pour water away from the air outlet. 5. Do not use other acids or enzyme detergents, as this may give o hazardous gas or cause malfunction. 6. If diuser is not used for an extended period, drain water NOTE: Be sure to use a mild detergent. from the reservoir and allow to dry. Before using, clean the reservoir with a mild detergent. Storing Allow the Smart Aroma Diuser to dry o completely before storing. Store in a dry location. Do not place heavy items on top of the Smart Aroma Diuser during storage as this may result in possible damage. Troubleshooting Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are problems with your internet connection. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. Setup is not working properly. 1. Close all apps that are running in the background then 2. Uninstall and reinstall the atomi smart app then repeat re-open the atomi smart app. the setup process. Smart Aroma Diuser will not turn ON/OFF Check to see if theres enough water in the tank. If not use the measuring cup to ll tank with appropriate amount of water. Check that the plug is fully inserted into the bottom of the base. There is no mist being emitted. 1. Check the water level. The unit shuts o automatically when the water level is too low as a safety feature. 2. Make sure nothing is blocking the Mist Output. 3. Check the fan vent on the bottom of the base is not blocked. 4. Empty and rinse the water reservoir with cool tap water. 15 16 FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: Suitable for indoor use only. Made in China For questions or concerns, email us at info@atomiusa.com Manufactured and marketed by Atomi, Inc. 10 West 33rd St. Suite 520, New York, NY 10001 atomi is a trademark of Atomi, Inc. Designed by atomi in New York. Made in China One-year limited warranty from date of purchase against defects in materials and workmanship. Google is a trademark of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its aliates. FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 17 18