all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.26 MiB | September 13 2022 / March 13 2023 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 1.83 MiB | September 13 2022 / March 13 2023 | delayed release | ||
1 |
|
External Photos | External Photos | 780.96 KiB | September 13 2022 / March 13 2023 | delayed release | ||
1 |
|
Label & Label Location | ID Label/Location Info | 141.65 KiB | September 13 2022 | |||
1 |
|
Antenna Report | Test Report | 403.41 KiB | September 13 2022 | |||
1 | Block Diagram | Block Diagram | September 13 2022 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 83.29 KiB | September 13 2022 | |||
1 |
|
FCC SDOC | Attestation Statements | 343.63 KiB | September 13 2022 | |||
1 |
|
Models Declaration Letter | Cover Letter(s) | 101.74 KiB | September 13 2022 | |||
1 | Operation Description | Operational Description | September 13 2022 | confidential | ||||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 45.25 KiB | September 13 2022 | |||
1 | Schematics | Schematics | September 13 2022 | confidential | ||||
1 |
|
Test Report | Test Report | 866.41 KiB | September 13 2022 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 288.22 KiB | September 13 2022 / March 13 2023 | delayed release |
1 | User Manual | Users Manual | 2.26 MiB | September 13 2022 / March 13 2023 | delayed release |
Wi-Fi Weather Station Manual 1. Quick Start Guide ................................................................................................................................... 2 2. Pre-Installation Checkout and Site Survey............................................................................................. 3 2.1 Pre-Installation Checkout ..................................................................................................................... 3 3. Getting Started........................................................................................................................................ 3 3.1 Parts List ............................................................................................................................................... 3 3.2 Included Tools ...................................................................................................................................... 3 3.3 Recommended Tools ....................................................................................................................... 3 3.4 Sensor Array Setup ............................................................................................................................... 4 3.4.1 Install wind vane ............................................................................................................................ 4 3.4.2 Install wind cups ............................................................................................................................ 4 3.4.3 Install U-bolts ................................................................................................................................ 5 3.4.4 Install Rain Gauge Funnel ............................................................................................................. 5 3.4.5 Install the Funnel Coil Filter .......................................................................................................... 6 3.4.6 Install Batteries .............................................................................................................................. 6 4.5 Display console ............................................................................................................................... 7 4.5.1 Screen Display ............................................................................................................................... 8 4.5.2 Initial Display Console Set Up ...................................................................................................... 9 4.5.3 Console Factory Reset Steps ......................................................................................................... 9 5. Key function ............................................................................................................................................ 9 6. Finding the WS-1965 from your device (computer, smart phone, or tablet with a browser) ............... 10 6.1 PC Users ............................................................................................................................................. 10 6.2 Mac Users ........................................................................................................................................... 11 6.3 Linux Users ........................................................................................................................................ 12 7. Updating console firmware .................................................................................................................. 14 8. Registering with AmbientWeather.net .................................................................................................. 14 8.1 AmbientWeather.net ...................................................................................................................... 15 8.1.1 Ambient Weather Dashboard Apps ......................................................................................... 16 8.1.2 IFTTT ..................................................................................................................................... 16 8.1.3 Amazon Alexa ........................................................................................................................ 16 8.1.4 Works with Google Assistant .................................................................................................. 17 9. Setting mode ......................................................................................................................................... 17 9.1 Barometric Pressure Display ......................................................................................................... 18 9.1.1 Viewing Absolute vs. Relative Pressure ................................................................................. 18 9.1.2 Rate of Change of Pressure Graph .......................................................................................... 18 9.1.3 Relative Pressure Calibration Discussion ............................................................................... 19 9.2 Rain Display .................................................................................................................................. 19 9.2.1 Rain Increments of Measure ................................................................................................... 19 Increments of Rain Definitions ............................................................................................... 19 9.2.2 9.3 Wind Display................................................................................................................................. 20 Temperature Display ..................................................................................................................... 20 9.4 9.4.1 Wind Chill, Dew Point, Heat Index Display and Multi-channel Scroll Mode ....................... 20 9.5 Alarms ........................................................................................................................................... 20 9.5.1 Viewing High and Low Alarms .............................................................................................. 20 Setting High and Low Alarms ................................................................................................ 21 9.5.2 9.6 Backlight Operation ...................................................................................................................... 22 9.6.1 With AC Adapter..................................................................................................................... 22 9.6.2 Without AC Adapter ............................................................................................................... 22 Tendency Arrows .................................................................................................................... 22 9.6.3 Version 1.0
. Page 1 9.6.4 Wireless Signal Quality Indicator ........................................................................................... 23 9.7 Weather Forecasting ...................................................................................................................... 23 Storm Alert .............................................................................................................................. 23 9.7.1 9.7.2 Weather Forecasting Description and Limitations .................................................................. 23 9.8 Max/Min Mode ............................................................................................................................. 24 9.8.1 Viewing Max/Min Values ....................................................................................................... 24 9.8.2 Display Wind Chill, Heat Index vs. Dew Point Max/Min Values .......................................... 24 9.8.3 Display Wind Speed vs. Wind Gust Max Values .................................................................... 24 9.8.4 Display Hourly Rain, Rain Rate ............................................................................................. 25 9.8.5 Display Absolute and Relative Pressure Min and Max Values ............................................... 25 9.9 Resynchronize Wireless Sensor .................................................................................................... 25 9.10 Calibration ..................................................................................................................................... 25 9.10.1 Relative Barometric Pressure Calibration Example ............................................................... 28 9.10.2 PM25 Air Quality Sensor Calibration ..................................................................................... 28 9.10.3 AQIN Calibration ................................................................................................................... 29 9.10.4 Soil Moisture Calibration ....................................................................................................... 29 9.10.4.1 0% Soil Moisture Set Point .................................................................................... 29 9.10.4.2 100% Soil Moisture Set Point ................................................................................ 29 9.10.4.3 Customize and Reset .............................................................................................. 30 9.10.5 Multi-Channel Temperature and Humidity Calibration .......................................................... 30 Install Mounting Pole .................................................................................................................... 30 9.11.1 Before you mount ................................................................................................................... 30 9.11.2 Site Survey .............................................................................................................................. 31 9.11.3 Mounting ................................................................................................................................. 31 11 Live Internet Publishing ....................................................................................................................... 32 12 Optional sensors ................................................................................................................................... 32 12.1 Connecting optional sensors to WS-1965 via the web GUI. ........................................................... 34 12.2 Indoor/Outdoor Thermo-Hygrometer, 8 Channel (optional)............................................................ 34 13 Specifications ....................................................................................................................................... 36 13.1 Wireless Specifications .................................................................................................................... 36 13.2 Measurement Specifications ............................................................................................................ 37 13.3 Power Consumption ...................................................................................................................... 37 14. Maintenance ......................................................................................................................................... 37 15. Troubleshooting Guide ......................................................................................................................... 37 16 Liability Disclaimer.............................................................................................................................. 38 17 FCC Statement ...................................................................................................................................... 39 9.11 1. Quick Start Guide Although the manual is comprehensive, much of the information contained may be intuitive. In addition, the manual does not flow properly because the sections are organized by components. The following Quick Start Guide provides only the necessary steps to install, operate the weather station, and upload to the internet, along with references to the pertinent sections. Required Description Assemble and power up the outdoor sensor array Power up the display console and synchronize with outdoor sensor array Configure Wi-Fi via Web GUI setup Register and upload to AmbientWeather.net Calibrate the relative pressure to sea-level conditions (local source) on console Mount the sensor array Step 1 2 3 4 5 6 Section 5.4.15.4.6 5.5 7 9 10.10.1 10.11 Version 1.0
. Page 2 2. Pre-Installation Checkout and Site Survey 2.1 Pre-Installation Checkout Before installing your weather station in the permanent location, we recommend operating the weather station for one week in a temporary location with easy access. This will allow you to check out all the functions, ensure proper operation, and familiarize you with the weather station and calibration procedures. This will also allow you to test the wireless range of the weather station. 3. Getting Started 3.1 Parts List QTY Item 1 1 1 1 2 2 1 1 1 1 Display Console Frame Dimensions (LxWxH): 4.12 x 1.1 x 4.4 LCD Dimensions (LxH): 3.20 x 3.80 Outdoor sensor array (Thermo-hygrometer / Rain Gauge / Wind Speed Sensor
/Transmitter) Wind Vane Wind Cups Pole mounting U-bolts Pole mounting U-bolt nuts Metal mounting plate to be used with U-Bolts User manual Zip bag for 1pc 10mm single-head wrench USB cable 3.2 Included Tools Quantity 1 Picture 3.3 Recommended Tools Adjustable wrench (for mounting pole) Compass or GPS (for wind direction calibration) Item Precision Screwdriver #1 (for small Phillips screws on wind vane and wind cups Version 1.0
. Page 3 3.4 Sensor Array Setup 1. Wind Cups/Wind Speed Sensor 2. Wind Vane 3. Thermometer-hygrometer sensor and solar radiation shield 4. Rain collector 5. Bubble level 6. Antenna 7. U-Bolt 8. Battery compartment 9. Reset button 10. LED transmitter Indicator 11. Metal Mounting plate. 3.4.1 Install wind vane Push the wind vane onto the shaft on the top of the sensor, until it stops moving further, as shown in figure 1. Tighten the set screw, with the provided Philips screwdriver (size PH0), until the wind van cannot be removed from the axle, as shown in figure 2. Make sure the wind vane spin freely. The wind vanes movement has a small amount of friction, which is helpful in providing steady wind direction measurements. Figure 1 Figure 2 There are four alphabet letters of N, E, S and W around the wind direction, representing for the direction of North, East, South and West. Wind direction sensor must be adjusted so that the directions on the sensor are matching with your real location. Permanent wind direction error will be installation. when the wind direction sensor is not positioned correctly during installation. 3.4.2 Install wind cups Push the wind speed into the shaft as shown in Figure 3. Tighten the set screw with as shown in figure 4. Make sure the wind speed can spin freely. Version 1.0
. Page 4 Figure 3 Figure 4 3.4.3 Install U-bolts Installation of the U-bolts, which are in turn used to mount the sensor package on a pole, requires installation of an included metal plate to receive the U-bolt ends. The metal plate, visible in Figure 5, has four holes through which the ends of the two U-Bolts will fit. The plate itself is inserted in a groove on the bottom of the unit. Note that one side of the plate has a straight edge (which goes into the groove), the other side is bent at a 90-degree angle and has a curved profile
(which will end up hugging the mounting pole). Once the metal plate is inserted, remove nuts from the U-Bolts and insert both U-bolts through the respective holes of the metal plate as shown in Figure 5. Loosely screw on the nuts on the ends of the U-bolts. You will tighten these later during final mounting. Final assembly is shown in Figure 6. Figure 5 The plate and U-Bolts are not yet needed at this stage but doing this now may help avoid damaging wind vane and wind speed cups later. Figure 6 3.4.4 Install Rain Gauge Funnel Version 1.0
. Page 5 Install the rain gauge funnel. Rotate clockwise to attach the funnel to the outdoor sensor. 3.4.5 Install the Funnel Coil Filter To install the funnel coil filter, press the coil until the hook is inside the hole at the bottom of the funnel, and locked in place. The spring tension will keep the filter sit tight on the funnel. Figure 7 3.4.6 Install Batteries Insert 2 x AA batteries in the battery compartment. The LED indicator on the back of the transmitter will turn on for four seconds and normally flash once every 16 seconds (the sensor transmission update period). Figure 8 Version 1.0
. Page 6 Note: If no LED light up or is permanently on, make sure the batteries are inserted the correct way or a proper reset has happened. Do not install the batteries backwards. You can permanently damage the outdoor sensor Figure 9 Note: We recommend 2 x AA Energizer lithium batteries for cold weather climates, but alkaline batteries are enough for most climates. We do not recommend rechargeable batteries. They have lower voltages, they do not operate well at wide temperature ranges, and do not last as long, resulting in poorer reception. 4.5 Display console The front and back of the display console is shown in Figure10 and Figure 11. Figure 10 Figure 11
(1) A/C power port for A/C adapter part# WS-1965-AC
(2) Unfold the desk stand and place 5 to 10 feet away from the outdoor sensor array per Figure 11.
(3) Sensor arm containing temperature and humidity sensor.
(4) Remove the battery door on the back of the console and insert 2 x AA Alkaline or Lithium batteries per Figure 12. Wait several minutes for the remote sensors to synchronize with the display console. Version 1.0
. Page 7 4.5.1 Screen Display Figure 12 1.Wind direction 2. Wind speed 3. RF icon Figure 13 9. Rainfall 10. Rate of Change of Pressure Graph 11. Weather forecast Version 1.0
. Page 8 4. 8 Channel Indoor/Outdoor Thermo-Hygrometer recycle icon (optional) 12. Date 5. Outdoor temperature 6. Outdoor humidity 7. Indoor humidity 8. Indoor temperature 4.5.2 Initial Display Console Set Up Insert the batteries to power up the display console. 13. WIFI icon 14. Time 15. Daylight Savings Time (DST) The unit will show software version number 2 seconds after power reset. The unit will turn on all segments of the LCD for 3 seconds after power reset, the display will attempt to register the outdoor sensor array for 3 minutes. Figure 14 4.5.3 Console Factory Reset Steps Under AC power (using optional AC adapter): press and hold Light + Mode (Figure 15) for 5 seconds Under battery power (no AC adapter connected): press and hold Light button (Figure 15) for 2 seconds until WAK is displayed then press and hold Light + Mode (Figure 15) for 5 seconds Note: WAK mode will revert to normal after 3 seconds. 5. Key function The console has five keys for easy operation Version 1.0
. Page 9 Figure 15 Key MODE TEMP+
WIND -
Description Press and hold for two seconds to enter the Set Mode. Press to switch between Normal Mode, Max Mode, Min Mode, High Alarm Mode, Low Alarm Mode, MAC address display Mode Press to switch between Outdoor Temperature, Wind Chill, Dew Point, Heat Index, 8 channel optional Indoor/Outdoor Thermo-hygrometer, Scrolling Mode Press to switch between average wind speed and wind gust. Press and hold for two seconds to switch the wind direction to display in degrees or in letters. RAIN/PRE Press and hold for two seconds switch between Rain and Pressure. While in Rain mode, press to switch between Rain Rate, Rain Events, Hourly Rain, Daily Rain, Weekly Rain, and Monthly Rain LIGHT While in Pressure mode, press to switch between Relative pressure and Absolute pressure Press to adjust the LCD backlight brightness (high, medium, and off). Press to exit the SET mode at any time. 6. Finding the WS-1965 from your device (computer, smart phone, or tablet with a browser) To send weather data to these services you must configure Wi-Fi via Web GUI to connect your console to the internet. During console credentials setup, firmware update, the communication between device and console is based on Wi-Fi so your device needs to be able to connect to the console Wi-Fi. Note: Console Wi-Fi can operate on battery power for a limited time this will require the modem or router to be on battery backup such as UPS also to continue transmitting. 6.1 PC Users To find the WS-1965, connect to power and look for the following WIFI network. Version 1.0
. Page 10 Connect to the network and then open a browser Note: you may be told network has no internet. Navigate to the following IP address 192.168.4.1 you will be presented with the following screen.
(Note: default password is blank) Once logged in you will want to navigate to the local network screen to connect to WIFI. 6.2 Mac Users To find the WS-1965, connect to power and look for the following WIFI network. Version 1.0
. Page 11 Connect to the network and then open a browser Note: you may be told network has no internet. Navigate to the following IP address 192.168.4.1 you will be presented with the following screen.
(Note: default password is blank) Once logged in you will want to navigate to the local network screen to connect to WIFI. 6.3 Linux Users To find the WS-1965, connect to power and look for the following WIFI network. Version 1.0
. Page 12 Connect to the network and then open a browser Note: you may be told network has no internet. Navigate to the following IP address 192.168.4.1 you will be presented with the following screen.
(Note: default password is blank) Once logged in you will want to navigate to the local network screen to connect to WIFI. Version 1.0
. Page 13 7. Updating console firmware Access the console Device settings area from the Menu On this screen you can now select to manually check for a firmware upgrade or can allow the station to automatically upgrade the firmware when a new one is released 8. Registering with AmbientWeather.net Please note that you can send data to all cloud services at the same time. Version 1.0
. Page 14 8.1 AmbientWeather.net Registration for AmbientWeather.net is accomplished through the web GUI After access the web GUI you will click on the Weather Services tab. On this screen you can enter you emailed address which is connected to your account on AmbientWeather.net. Now you can set the interval to upload data default is 1 Note that this is an example only and your MAC address will be different. Once you completed this process you will receive and email like the example below to complete the process. Once registered, select the dashboard to view your data, as shown in Figure . Version 1.0
. Page 15 Figure 16 8.1.1 Ambient Weather Dashboard Apps Android and iOS Ambient Weather Dashboard apps are available in addition to AmbientWeather.net. Search Ambient Weather Dashboard in the Google Play or iOS app store, or visit:
Ambient Weather Dashboard for Android:
https://play.google.com/store/apps/details?id=net.ambientweather.dashboard Ambient Weather Dashboard for iOS:
https://apps.apple.com/us/app/ambient-weather-dashboard/id1426025887 8.1.2 IFTTT The AmbientWeather.net service connects to IFTTT, the platform that allows devices and services to work together seamlessly. Here are a few things you can do with IFTTT:
Turn off your Rachio sprinklers when it rains, there is too much wind, or below freezing. Close your Hunter blinds when the sun is too intense. Close your garage door when it is too windy. Blink your hue lights when it starts raining. Connect to other web services, such as Gmail, Facebook, Instagram, or Pinterest. For more information on IFTTT and how it can work for you, visit:
https://ifttt.com/ambient_weather 8.1.3 Amazon Alexa The Ambient Weather skill allows you to get real-time, and past weather information generated by the devices they have set up at AmbientWeather.net. Enable the skill and get started: say "Alexa, ask Ambient Weather for a weather report.". This will provide you with your outdoor weather report, but you can ask for your indoor weather report as well by saying, "Alexa, ask Ambient Weather about the indoor conditions."
You can also ask for a report about a specific day, month, or year. Just say "Alexa, ask Ambient Weather about the Version 1.0
. Page 16 weather yesterday." or "Alexa, ask Ambient Weather about the weather in May". For more information on Amazon Alexa, visit:
https://www.amazon.com/dp/B074PGCM1D/
8.1.4 Works with Google Assistant The Ambient Weather Google Assistant app provides Ambient Weather personal weather station owners with the ability to get real-time, and past weather information generated by the devices they have set up at AmbientWeather.net Link your account to get started: say 'hey google, Ambient Weather... weather report.' This will provide you with your outdoor weather report. You can ask for your indoor weather report as well by saying, ' indoor conditions'. You can also link the Ambient Weather app by downloading the Google Assistant. Here are some sample commands:
Weather Report Outdoor conditions Indoor conditions Yesterdays weather Conditions for October 15, 2019 Conditions for September 2019 Conditions for 2020 For more information and to enable this app, visit:
https://assistant.google.com/services/a/id/668e6f3369f27209/
9. Setting mode Note: DST, Time Zone setting can only be programed via awnet app. You will need to set time zone info properly if you have the console connected to internet and these setting need to be adjusted for your setup, otherwise console will be synchronized to default setting if you dont setup these parameters on the APP properly. Press and hold the MODE button for two seconds to enter the Set Mode. To proceed to the next setting, press (do not hold) the MODE button. To exit the SET mode at any time, press the LIGHT button. summarizes the set mode sequence and commands. Settings Command Mode Press [TEMP +] or [WIND -] to switch OFF and ON.
[MODE] +
2 seconds Enter Set Mode, Beep On or Off Image This will prevent the beep from sounding when pressing any button.
[MODE]
Clear Max/Min Press [TEMP +] or [WIND -] to switch OFF and ON. When set to ON, the minimum and maximum values reset every day at midnight (00:00). When set to OFF, the minimum and maximum values must be reset manually. Version 1.0
. Page 17
[MODE]
[MODE]
[MODE]
[MODE]
[MODE]
[MODE]
[MODE]
[MODE]
12 hour / 24 Hour Format Hour Press [TEMP +] or [WIND -] to switch hour format between 12 hour and 24-hour format. Press [TEMP +] or [WIND -] to adjust hour up or down. Minute Year Month Day Pressure Units of Measure Relative Pressure Calibration Press [TEMP +] or [WIND -] to adjust minute up or down. Press [TEMP +] or [WIND -] to adjust year up or down Press [TEMP +] or [WIND -] to adjust month up or down Press [TEMP +] or [WIND -] to adjust day up or down Press [TEMP +] or [WIND -] to change units of measure between hap, mmHg or inHg. Press [TEMP +] or [WIND -] to adjust relative pressure up or down
[MODE]
[MODE]
Temperature Units of Measure Wind Units of Measure Reference Section 10.10.1 for details on calibration of relative pressure. Press [TEMP +] or [WIND -] to change temperature units of measure between F and C. Press [TEMP +] or [WIND -] to change wind units of measure between mph, km/h, knots, m/s and bft.
[MODE]
Rain Units of Measure Press [TEMP +] or [WIND -] to change rain units of measure between in and mm. Exit Set Mode
[MODE]
[MODE] + 2 seconds means press and hold the MODE button for two seconds.
[MODE] means press the MODE button. Figure 17 9.1 Barometric Pressure Display 9.1.1 Viewing Absolute vs. Relative Pressure Press and hold [RAIN/PRE] for two seconds switch between Rain and Pressure. While in Pressure mode Press
[RAIN/PRE] to switch between absolute and relative pressure Absolute pressure is the measured atmospheric pressure, and is a function of altitude, and to a lesser extent, changes in weather conditions. Absolute pressure is not corrected to sea-level conditions. Relative pressure is corrected to sea-level conditions. For further discussion of relative pressure and calibration, reference Section 10.1.2. 9.1.2 Rate of Change of Pressure Graph The rate of change of pressure graphic is shown to the left of the barometric pressure and signifies the difference between the daily average pressure and the 30-day average (in inHg). Version 1.0
. Page 18 9.1.3 Relative Pressure Calibration Discussion Figure 18 The calibration is completed within the web GUI. To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions. Because the air pressure decreases as you rise in altitude, the sea-
level corrected pressure (the pressure your location would be at if located at sea-level) is generally higher than your measured pressure. Thus, your absolute pressure may read 28.62 inHg (969 mb) at an altitude of 1000 feet (305 m), but the relative pressure is 30.00 inHg (1016 mb). The standard sea-level pressure is 29.92 inHg (1013 mb). This is the average sea-level pressure around the world. Relative pressure measurements greater than 29.92 inHg (1013 mb) are considered high pressure and relative pressure measurements less than 29.92 inHg are considered low pressure. Note: Calibration setting is saved until console is factory reset. If the console location elevation changes it will need to be recalibrated. 9.2 Rain Display 9.2.1 Rain Increments of Measure Press and hold [RAIN/PRE] for two seconds switch between Rain and Pressure. While in Rain mode press the
[RAIN/PRE] to switch between Rain Rate (in/hr.), Rain Event, Rain Hourly, Daily Rain, Weekly Rain, Monthly Rain and Yearly Rain. 9.2.2 Increments of Rain Definitions Rain rate or hourly rain is defined as the last 10 minutes of rainfall, multiplied by six (10 minutes x 6 = 1 hour). This is also referred to as instantaneous rain per hour. Rain event is defined as continuous rain, and resets to zero if rainfall accumulation is less than 1 mm (0.039 in) in a 24-hour period. Daily Rain is defined as the rainfall since midnight (00:00). Weekly Rain is defined as the calendar week total and resets on Sunday morning at midnight (Sunday thru Saturday). Monthly Rain is defined as the calendar month total and resets on the first day of the Month. Total Rain is defined as the running total since station was powered up. Version 1.0
. Page 19 9.3 Wind Display Press the [WIND -] button to switch between average wind speed and, wind gust. Press and hold the [WIND -] button for two seconds to switch the wind direction to display in degrees or in letters. Wind speed is defined as the average wind speed in the 16 second update period. Wind gust is defined as the peak wind speed in the 16 second update period. 9.4 Temperature Display If temperature is lower than minimum range, the temperature field will display dashes (--. -). If temperature is higher than maximum range, the temperature field will display dashes (--. -). 9.4.1 Wind Chill, Dew Point, Heat Index Display and Multi-channel Scroll Mode Press the [TEMP] button to switch between Outdoor Temperature, Wind Chill, Dew Point, Heat Index. The WS-1965 supports up to 8 additional temperature humidity sensors (WH31E, WH31P, WH31PF). If you have the extra sensors, press the [TEMP +] button to switch between Outdoor Temperature, Wind Chill, Dew Point, Heat Index, 8 channel optional Indoor/Outdoor Thermo-hygrometer, Scroll Mode 9.5 Alarms 9.5.1 Viewing High and Low Alarms To view the high alarm settings, press MODE button a third time, and the high alarms will be displayed, as shown in Figure 19 (a). To view the low alarm settings, press the MODE button a fourth time, and the low alarms will be displayed, as shown in Figure 19 (b). To return to normal mode, press the LIGHT button again.
(a)
(b) Figure 19 Version 1.0
. Page 20 9.5.2 Setting High and Low Alarms While the High Alarm is displayed (reference Section 9.8.1), press and hold the MODE button for 2 seconds to enter the High Alarm Set Mode. While the Low Alarm is displayed (reference Section 9.8.1), press and hold the MODE button for 2 seconds to enter the Low Alarm Set Mode. To save and proceed to the next alarm setting, press the Mode button. To exit the High Alarm Set Mode at any time, press the LIGHT button. Figure summarizes the alarm mode sequence and commands. Command
[MODE] +
2 seconds Mode Enter High Alarm Set Mode, Alarm Hour Press [TEMP +] or [WIND -] to adjust alarm hour up or down. Settings Press [RAIN/PRE] to turn the time alarm on or off. When the alarm is on, the alarm time icon will appear.
[MODE]
Alarm Minute Press [TEMP +] or [WIND -] to adjust alarm minute up or down.
[MODE]
Alarm High Indoor Temperature
[MODE]
Alarm High Indoor Humidity
[MODE]
Alarm High Outdoor Temperature
[MODE]
Alarm High Outdoor Humidity
[MODE]
Alarm High Wind Gust Press [RAIN/PRE] to turn the time alarm on. The alarm time icon will appear. Press [RAIN/PRE] again to turn the time alarm off. The alarm time icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Version 1.0
. Page 21
[MODE]
Alarm High Rain Rate Press [TEMP +] or [WIND -] to adjust alarm value up or down.
[MODE]
Alarm Low Indoor Temperature
[MODE]
Alarm Low Indoor Humidity
[MODE]
Alarm Low Outdoor Temperature
[MODE]
Alarm Low Outdoor Humidity Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear. Press [TEMP +] or [WIND -] to adjust alarm value up or down. Press [RAIN/PRE] to turn the alarm on. The alarm icon will appear. Press [RAIN/PRE] to turn the alarm off. The alarm icon will disappear.
[MODE]
Exit alarm settings mode.
[MODE] + 2 seconds means press and hold the ALARM button for two seconds.
[MODE] means press the MODE button. Figure 20 9.6 Backlight Operation 9.6.1 With AC Adapter The backlight requires AC power to stay on continuously when the included AC adapter is used. When AC power is disconnected, the backlight can be temporarily turned on when any button is pressed. Press the LIGHT button to adjust the brightness between High, Low and Off. 9.6.2 Without AC Adapter To temporarily turn on the back light for 15 seconds, press the LIGHT button. 9.6.3 Tendency Arrows Tendency arrows allow you to quickly determine of temperature or pressure are rising and falling in a three-hour update period, updated every 30 minutes. Figure defines the conditions for rising and falling pressure every 3 hours. Version 1.0
. Page 22 Tendency indicators
Condition Humidity Change per 3 Hours Temperature Change per 3 Hours Rising Steady Falling Rising > 3%
Change 3%
Falling > 3%
Figure 21 Rising > 1 C / 2 F Change 1 C / 2 F Falling > 1 C / 2 F 9.6.4 Wireless Signal Quality Indicator The wireless signal strength displays reception quality. If no signal is lost, the signal strength indicator will display 5 bars. If the signal is lost once, four bars will be displayed, as shown in Figure . Five Bars Four Bars No signal loss Lost signal once Figure 22 9.7 Weather Forecasting The five weather icons are Sunny, Partly Cloudy, Cloudy, Rainy, Stormy and Snowy. The forecast icon is based on the rate of change of barometric pressure. Please allow at least one month for the weather station to learn the barometric pressure over time. Sunny Partly Cloudy Cloudy Rainy Snowy Pressure increases for a sustained period Pressure increases slightly, or initial power up Pressure decreases slightly Pressure decreases for a sustained period Pressure decreases for a sustained period and temperature is below freezing 9.7.1 Storm Alert Figure 23 If there is a rapid drop in barometric pressure, the forecast icon will flash. 9.7.2 Weather Forecasting Description and Limitations In general, if the rate of change of pressure increases, the weather is generally improving (sunny to partly cloudy). If the rate of change of pressure decreases, the weather is generally degrading (cloudy, rainy). If the rate of change is relatively steady, it will read partly cloudy. The reason the current conditions do not match the forecast icon is because the forecast is a prediction 24-48 hours in advance. In most locations, this prediction is only 70% accurate and it is a good idea to consult the National Weather Version 1.0
. Page 23 Service for more accurate weather forecasts. In some locations, this prediction may be less or more accurate. However, it is still an interesting educational tool for learning why the weather changes. The National Weather Service (and other weather services such as Accuweather and The Weather Channel) have many tools at their disposal to predict weather conditions, including weather radar, weather models, and detailed mapping of ground conditions. 9.8 Max/Min Mode 9.8.1 Viewing Max/Min Values To view the max value, press the MODE button, and the max values will be displayed, as shown in Figure (a). To clear the max values, press and hold the MODE button while the max values are displayed. To view the low alarm settings, press the MODE button again, and the min values will be displayed, as shown in Figure 24 (b). To clear the min values, press and hold the MODE button while the min values are displayed. To return to normal mode, press the LIGHT button.
(a)
(b) Figure 24 9.8.2 Display Wind Chill, Heat Index vs. Dew Point Max/Min Values While the max values are displayed as outlined in Section 9.8.1, press the TEMP+ button once to view the wind chill, twice to view the dew point, third to view the heat index and a fourth time to return to outdoor temperature. While the min values are displayed as outlined in Section 9.8.1, press the TEMP+ button once to view the wind chill, twice to view the dew point, third to view the heat index and a fourth time to return to outdoor temperature. 9.8.3 Display Wind Speed vs. Wind Gust Max Values While the max values are displayed as outlined in Section 9.8.1, press the WIND- button once to view the max wind gust, and twice to return to wind speed. Version 1.0
. Page 24 9.8.4 Display Hourly Rain, Rain Rate While the max values are displayed as outlined in Section 9.8.1. press the RAIN button once to view the max hourly rain, twice to view the rain rate. 9.8.5 Display Absolute and Relative Pressure Min and Max Values While the max values are displayed as outlined in Section 9.8.1, press, and hold the RAIN/PRE button for two seconds to enter pressure display, press RAIN/PRE button to switch between Relative pressure and Absolute pressure While the min values are displayed as outlined in Section 9.8.1, press, and hold the RAIN/PRE button for two seconds to enter pressure display, press RAIN/PRE button to switch between Relative pressure and Absolute pressure While the min values are displayed as outlined in Section 9.8, press and hold the PRESSURE button for two seconds to view the absolute pressure, and press and hold the PRESSURE button for two seconds again to return to relative pressure. To return to normal mode, press the LIGHT button. 9.9 Resynchronize Wireless Sensor While in outdoor TH/wind chill/dew point/heat index display mode press TEMP+ button for 5 seconds, and the console will re-register the outdoor sensor array While in 1-8 channel Thermo-hygro sensor display mode press TEMP+ button for 5 seconds, and the console will re-
register the current channel outdoor sensor. While in Scrolling Mode press TEMP+ button for 5 seconds, and the console will re-register the sensor array and 1-8 channel sensors. 9.10 Calibration Select the Calibration tab to view your calibration data from the weather station. Calibration of most parameters is not required, except for Relative Pressure, which must be calibrated to sea-level to account for altitude effects. For more information on sea-level pressure calibration, please reference note (3) below. On the Calibration screen you can make any need adjustments Version 1.0
. Page 25 Parameter Default Typical Calibration Source Type of Calibration Offset Temperature Humidity Offset ABS Barometer Offset REL Barometer Offset Wind Direction Offset Solar Radiation Gain Gain UV Current Value Current Value Current Value Current Value Current Value 1.00 126.7 lux Red Spirit or Mercury Thermometer (1) Sling Psychrometer (2) Calibrated laboratory grade barometer Local airport (3) GPS, Compass (4) Calibrated laboratory grade solar radiation sensor Solar radiation conversion from lux to w/m2 for wavelength correction (5) Calibrated laboratory grade wind meter (6) Sight glass rain gauge with an aperture of at least 4
(7)
(1) Temperature errors can occur when a sensor is placed too close to a heat source (such as a building structure, the Wind Rain Gain Gain 1.00 1.00 ground, or trees). To calibrate temperature, we recommend a mercury or red spirit (fluid) thermometer. Bi-metal (dial) and digital thermometers (from other weather stations) are not a good source and have their own margin of error. Using a local weather station in your area is also a poor source due to changes in location, timing (airport weather stations are only updated once per hour) and possible calibration errors (many official weather stations are not properly installed and calibrated). Version 1.0
. Page 26 Place the sensor in a shaded, controlled environment next to the fluid thermometer, and allow the sensor to stabilize for 48 hours. Compare this temperature to the fluid thermometer and adjust the Temperature Offset in the Calibration Screen of the web interface to match the fluid thermometer.
(2) Humidity is a difficult parameter to measure electronically and drifts over time due to contamination. In addition, location has an adverse effect on humidity readings (installation over dirt vs. lawn for example). Official stations recalibrate or replace humidity sensors on a yearly basis. Due to manufacturing tolerances, the humidity is accurate to 5%. To improve this accuracy, the indoor and outdoor humidity can be calibrated using an accurate source, such as a sling psychrometer.
(3) The WS-1965 displays two different pressures: absolute (measured) and relative (corrected too sea-level). To compare pressure conditions from one location to another, meteorologists correct pressure to sea-level conditions. Because the air pressure decreases as you rise in altitude, the sea-level corrected pressure (the pressure your location would be at if located at sea-level) is generally higher than your measured pressure. Thus, your absolute pressure may read 28.62 inHg (969 mb) at an altitude of 1000 feet (305 m), but the relative pressure is 30.00 inHg (1016 mb). The standard sea-level pressure is 29.92 in Hg (1013 mb). This is the average sea-level pressure around the world. Relative pressure measurements greater than 29.92 inHg (1013 mb) are considered high pressure and relative pressure measurements less than 29.92 inHg are considered low pressure. Note: Calibration setting is saved until console is factory reset. If the console location elevation changes it will need to be recalibrated.
(4) Only use this if you improperly installed the weather station sensor array and did not point the direction reference to true north.
(5) The default conversion factor based on the wavelength for bright sunlight is 126.7 lux / w/m2. This variable can be adjusted by photovoltaic experts based on the light wavelength of interest, but for most weather station owners, is accurate for typical applications, such as calculating evapotranspiration and solar panel efficiency.
(6) Wind speed is the most sensitive to installation constraints. The rule of thumb for properly installing a wind speed sensor is 4 x the distance of the tallest obstruction. For example, if your house is 20 tall and you mount the sensor on a 5 pole:
Distance = 4 x (20 5) = 60. Many installations are not perfect and installing the weather station on a roof can be difficult. Thus, you can calibrate for this error with a wind speed multiplier. In addition to the installation challenges, wind cup bearings (moving parts) wear over time. Without a calibrated source, wind speed can be difficult to measure. We recommend using a calibrated wind meter (available from Ambient Weather) and a constant speed, high speed fan.
(7) The rain collector is calibrated at the factory based on the funnel diameter. The bucket tips every 0.01 of rain
(referred to as resolution). The accumulated rainfall can be compared to a sight glass rain gauge with an aperture of at least 4. Make sure you periodically clean the rain gauge funnel. Note: The purpose of calibration is to fine tune or correct for any sensor error associated with the devices margin of error. Errors can occur due to electronic variation (example, the temperature sensor is a resistive thermal device or RTD, the humidity sensor is a capacitance device), mechanical variation, or degradation (wearing of moving parts, contamination of sensors). Calibration is only useful if you have a known calibrated source, you can compare it against, and is optional. This section Version 1.0
. Page 27 discusses practices, procedures, and sources for sensor calibration to reduce manufacturing and degradation errors. Do not compare your readings obtained from sources such as the internet, radio, television, or newspapers. The purpose of your weather station is to measure conditions of your surroundings, which vary significantly from location to location. Select the Save button to confirm changes. 9.10.1 Relative Barometric Pressure Calibration Example Follow the next steps to calibrate the relative pressure in your weather station. Sample Equation for Relative Pressure Offset:
Official relative pressure, Step 1 (minus) Personal Weather Station relative pressure, Step 2 = Relative Pressure Offset Step 1: Gather your local relative pressure from an official weather station here: www.AmbientwWeather.net/baro In the below Sample Equation, the local official station reading is 30.12 inHg. Step 2: From your weather station display or the Live Data panel in the web GUI, note the absolute pressure (measured, and not corrected too sea-level). In the below Sample Equation, the weather station reads 28.90 inHg. Step 3: Enter the difference (calculated offset) in the Calibration panel for Relative Pressure Offset:
Sample Equation: Relative Pressure Offset = 30.12 28.90 = 1.22 9.10.2 PM25 Air Quality Sensor Calibration The calibrated PM2.5 equations are as follows:
Calibrated PM2.5 = Measured PM2.5 + PM2.5 Offset Version 1.0
. Page 28 9.10.3 AQIN Calibration The calibration equations are as follows:
Calibrated C02 = Measured C02 + C02 Offset Calibrated PM2.5 = Measured PM2.5 + PM2.5 Offset Calibrated PM10 = Measured PM10 + PM10 Offset 9.10.4 Soil Moisture Calibration The soil moisture sensor provides for optional two-point linear calibration. This is important due to different soil types and density. The calibration equation is defined as:
% Soil Moisture (calibrated) = (Now AD 0%AD) *100 / (100%AD 0%AD) Where AD stands for analog to digital and is the unscaled digital value, Now AD is the currently measured AD and the other parameters are described below. 9.10.4.1 0% Soil Moisture Set Point To determine the 0% soil moisture, collect a soil sample in a cup from where the sensor will be installed, and allow the soil to completely dry out. Next, place the soil sensor in the medium and allow the sensor to stabilize for one hour. Next, set the 0%AD calibration set point to the Now AD value. 9.10.4.2 100% Soil Moisture Set Point To determine the 100% soil moisture, collect a soil sample in a cup from where the sensor will be installed, and add water and mix until the soil is saturated, and there is no standing water. Next, place the soil sensor in the medium and allow the sensor to stabilize for one hour. Next, set the 100%AD calibration set point to the Now AD value. Version 1.0
. Page 29 9.10.4.3 Customize and Reset Once the 0%AD and 100%AD are entered, set Customize to ON. To return to the non-calibrated settings, set Customize to OFF. Select Reset to restore to factory default. 9.10.5 Multi-Channel Temperature and Humidity Calibration The calibrated temperature and humidity equations are as follows:
Calibrated Temperature = Measured Temperature + Temp. Offset Calibrated Humidity = Measured Humidity + Humidity Offset 9.11 Install Mounting Pole 9.11.1 Before you mount Before proceeding with the outdoor mounting detailed in this section, you may want to skip to setup instructions in section 5.4 and onwards first, while you keep the assembled outdoor sensor package nearby (although preferably not closer than 5 ft. from the console). This will make any troubleshooting and adjustments easier and avoids any distance or interference related issues from the setup. After setup is complete and everything is working, return here for outdoor mounting. If issues show up after outdoor mounting they are almost certainly related to distance, obstacles etc. Version 1.0
. Page 30 9.11.2 Site Survey Perform a site survey before installing the weather station. Consider the following:
1. You must clean the rain gauge every few months and change the batteries every year. Provide easy access to the weather station. 2. Avoid radiant heat transfer from buildings and structures. In general, install the sensor array at least 5 from any building, structure, ground, or roof top. 3. Avoid wind and rain obstructions. The rule of thumb is to install the sensor array at least four times the difference in the height of the sensor array and that of the tallest obstruction. For example, if the building is 20 tall and the mounting pole is 6 tall, install the sensor array 4 x (20 6) = 56 away. 4. Mount the sensor array in direct sunlight for accurate temperature readings. 5. Installing the weather station over sprinkler systems or other unnatural vegetation may affect temperature and humidity readings. We suggest mounting the sensor array over natural vegetation. 6. Wireless Range. Radio communication between receiver and transmitter in an open field can reach up to 330 feet, providing there are no interfering obstacles such as buildings, trees, vehicles, and high voltage lines. Wireless signals will not penetrate metal buildings. Under most conditions, the maximum wireless range is 100. 7. Radio Interference. Computers, radios, televisions, and other sources can interfere with radio communications between the sensor array and console. Please take this into consideration when choosing console or mounting locations. Make sure your display console is at least five feet away from any electronic device to avoid interference. 9.11.3 Mounting You can attach a pipe to a permanent structure and then attach the sensor package to it (see Figure 25-26). The U-Bolts will accommodate a pipe diameter of 1.25-2 inches (pipe not included). Version 1.0
. Page 31 Figure 9 Figure 25 Figure 26 Finally, place the sensor package on top of the prepared mount pipe. The U-bolts should be loose enough to allow this but loosen the nuts as necessary. Once placed, hand tighten all four nuts, taking care to do so evenly. Now you will need to align the whole package in the proper direction byrotating it on top of the mounting pipe as needed. Locate the arrow labeled WEST that you will find on top of the sensor package right next to the light sensor. You must rotate the whole sensor package until this arrow points due West. To achieve proper alignment, it is helpful to usea compass (many cell phones have a compass application). Once rotated in the correct orientation, lightly tighten the bolts a little more (use a wrench) to prevent further rotation. Note: Use the bubble level next to the rain sensor to make sure sensor array is completely level. If the sensor is not level the rain gauge will not measure properly. 11 Live Internet Publishing Your console can send your sensor data to select internet-based weather services. The supported services are shown in the table below:
Website AmbientWeather.net Hosting Service Ambient Weather Customized Website Description AmbientWeather.net is the most user-friendly design for monitoring your data across different platforms. Quickly view detailed information with our animated expandable modules. Supports email and text alerts. services dont support. Supports uploading to your customized website, if the website has the same protocol with Wunderground or Ambient Figure 27 12 Optional sensors The item supports the following optional sensors, and the console receives and sends this data directly to Ambient Weather.net or Wunderground.com. The data is not displayed on the console (pass through only) and sensor management and calibration can only be accomplished via the web GUI Item Number Number of Channels Description Image Version 1.0
. Page 32 AQIN 1 PM2.5, PM10 and CO2 Wireless Indoor Particulate Monitor PM25 1 PM2.5 Wireless Outdoor Particulate Monitor PM25IN 1 PM2.5 Wireless Indoor Particulate Monitor WH31E*
8 Indoor/Outdoor Thermo-Hygrometer WH31L 1 Lightning Detector WH31LA 4 Leak Detector WH31P*
8 Probed Thermometer WH31SM 8 Soil Moisture Sensor WH31PF*
8 Floating Pool Thermometer
(*) The WH31E, WH31P and WH31PF share the same 8-channels. Note: The Ambient Weather PM25IN and AQIN utilize the same channel on the WS-1965 console. Users can only utilize one sensor PM25IN or AQIN at a time. If you already have a PM25IN and are adding a AQIN to your console, please see Section # 4.1 of the AQIN manual to sync your new AQIN sensor. https://ambientweather.com/mwdownloads/download/link/id/1097/
Version 1.0
. Page 33 12.1 Connecting optional sensors to WS-1965 via the web GUI. The WS-1965 module supports up to 8 additional thermos-hygrometer sensors (Model WH31E, WH31P, WH31PF). Place the sensors in and around your home and monitor on AmbientWeather.net. Registering an additional sensor. Figure 28 Login to the WS-1965 web GUI and access Sensors ID tab. On the Sensors ID screen, you can register or re-register an additional sensor by clicking the Re-register button. 12.2 Indoor/Outdoor Thermo-Hygrometer, 8 Channel (optional) This item supports up to 8 additional thermo-hygrometer sensors (WH31), the data display on the console and sends the data to Ambientweather.net. Note: WH31P sensor body is not waterproof the probe is please when installing sensor body under a protected are such as an eave. Version 1.0
. Page 34 Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for outdoor temperature ranges between -4 F and 140 F and fresh lithium batteries for outdoor temperature ranges between -40 C and 60 C. 1 Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as shown in Figure 29 Figure 29 2 BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter. 3 Channel Number: This item supports up to eight transmitters. To set each channel number (the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure 29. 4 Temperature Units of Measure: To change the transmitter display units of measure (F vs. C), change Dip Switch 4, as referenced in Figure . Switch in down position. Switch in up position. Insert two AA batteries. 5 6 Verify the correct channel number (CH) and temperature units of measure (F vs. C) are on the display, as shown in Figure . Figure 30 Version 1.0
. Page 35
(1) temperature
(2) temperature units (C vs. F)
(3) channel number
(4) relative humidity Figure 31 7 Close the battery door. 8 Repeat for the additional remote transmitters, verifying each remote is on a different channel. 12.Best Practices for Wireless Communication Note: To ensure proper communication, mount the remote sensor(s) upright on a vertical surface, such as a wall. Do not lay the sensor flat. Wireless communication is susceptible to interference, distance, walls, and metal barriers. We recommend the following best practices for trouble free wireless communication. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer monitors and TVs. Radio Frequency Interference (RFI). If you have other 433 MHz devices and communication is intermittent, try turning off these other devices for troubleshooting purposes. You may need to relocate the transmitters or receivers to avoid intermittent communication. 1. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers, or walls) but typically you will get 100 feet maximum under most real-world installations, which include passing through barriers or walls. 2. Metal Barriers. Radio frequency will not pass-through metal barriers such as aluminum siding. If you have metal siding, align the remote and console through a window to get a clear line of sight. The following is a table of reception loss vs. the transmission medium. Each wall or obstruction decreases the transmission range by the factor shown below. Medium Glass (untreated) Plastics Wood Brick Concrete Metal RF Signal Strength Reduction 5-15%
10-15%
10-40%
10-40%
40-80%
90-100%
13 Specifications 13.1 Wireless Specifications Line of sight wireless sensor array RF transmission (in open air): 300 feet, 100 feet under most conditions Update Rate: Outdoor Sensor: 16 seconds, Indoor Sensor: 60 seconds Sensor Array RF Frequency: 915 MHz Version 1.0
. Page 36 13.2 Measurement Specifications The following table provides the specifications for the measured parameters. Measurement Indoor Temperature Outdoor Temperature Indoor Humidity Outdoor Humidity Barometric Pressure Range 32F to + 122 F
-40 to 149 F (lithium batteries)
-23 to 140 F (alkaline batteries) 10 to 99%
10 to 99%
8.85 to 32.50 inHg Rain Wind Direction Wind Speed 0 to 236 in. 0 - 360 0 to 100 mph (operational) Accuracy 2 F 1 F Resolution 0.1 F 0.1 F 5%
5%
0.08 inHg (within range of 27.13 to 32.50 inHg) 10%
10 2.2 mph or 10% (whichever is greater) 1 %
1 %
0.01 inHg 0.01 in 1 1.4 mph 13.3 Power Consumption Wireless Display: 2 x AA batteries (not included), we suggest Energizer Lithium batteries
- Expected battery life without optional AC adapter using Wi-Fi upload to AW.net is 5-6 months (the limiting factor will be the amount of use of the backlight)
- Expected battery life using the optional AC adapter is 12-18 months Sensor Array: 2 x AA batteries (not included), we suggest Energizer Lithium batteries
- Expected battery life: Energizer Lithium up to 2 years, Alkaline batteries at least 12 months, most rechargeable batteries expect 12 months or less 14. Maintenance 1. Clean the rain gauge once every 3 months. Rotate the funnel counterclockwise and lift to expose the rain gauge mechanism, and clean with a damp cloth. Remove any dirt, debris, and insects. If bug infestation is an issue, spray the array lightly with insecticide. 2. When replacing the batteries, apply a corrosion preventive compound on the battery terminals, available at Amazon and most hardware stores. In snowy environments, spray the top of the weather station with anti-icing silicon spray to prevent snow build up. 3. 15. Troubleshooting Guide Version 1.0
. Page 37 Problem Outdoor sensor array does not communicate to the display console. Solution The sensor array may have initiated improperly, and the data is registered by the console as invalid, and the array must be reset. Press the reset button as described in Section 5.3. With an open-ended paperclip, press the reset button for 3 seconds to resync the sensor array with the console about 10 feet away. The LED next to the battery compartment will flash every 16 seconds. If the LED is not flashing every 16 seconds Replace the batteries in the outside sensor array. If the batteries were recently replaced, check the polarity. If the sensor is flashing every 16 seconds, proceed to the next step. There may be a temporary loss of communication due to reception loss related to interference or other location factors, or the batteries may have been changed in the sensor array and the console has not been reset. The solution may be as simple as powering down and up the console
(remove AC power and batteries, wait 10 seconds, and reinsert AC power and batteries). Make certain that the sensor array is not too close to heat generating sources or strictures, such as buildings, pavement, walls, or air conditioning units. Use the calibration feature to offset installation issues related to radiant heat sources. Reference Section 9. You may be viewing the absolute pressure, not the relative pressure. Select the relative pressure. Make sure you properly calibrate the sensor to an official local weather station. Reference Section 9.8.1 for details. An unstable mounting solution (sway in the mounting pole) may result in the tipping bucket incorrectly incrementing rainfall. Make sure you have a stable, level mounting solution. 1. Check for Wi-Fi symbol on the display. If wireless connectivity is successful, the Wi-
Fi icon will be displayed in the time field. 2. Make sure your modem Wi-Fi settings are correct (network name, and password). 3. The console only supports and connects to 2.4 GHz routers. If you own a 5 GHz router, and it is a dual band router, you will need to disable the 5 GHz band, and enable the 2.4 GHz band. 4. The console does not support guest networks. Temperature sensor reads too high in the daytime. Relative pressure does not agree with official reporting station Rain gauge reports rain when it is not raining No Wi-Fi connection 16 Liability Disclaimer Please help in the preservation of the environment and return used batteries to an authorized depot. The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country and/or in unauthorized grounds strongly damages the environment. Reading the User manual is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. Version 1.0
. Page 38 This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public safety information. The specifications of this product may change without prior notice. This product is not a toy. Keep out of the reach of children. No part of this manual may be reproduced without written authorization of the manufacturer. Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. 17 FCC Statement Statement according to FCC part 15.19:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15.21:
Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Version 1.0
. Page 39
1 | Internal Photos | Internal Photos | 1.83 MiB | September 13 2022 / March 13 2023 | delayed release |
1 | External Photos | External Photos | 780.96 KiB | September 13 2022 / March 13 2023 | delayed release |
1 | Confidentiality Letter | Cover Letter(s) | 83.29 KiB | September 13 2022 |
(Shenzhen Fine Offset Electronics Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: (WA5WN67BN). Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type
(ie- Block Diagram, Schematics, Operational Description, Parts List, Tune Up Info) Schematic Diagram Block Diagram Operational Description File Name
(ie- 1100_schematics.pdf) Schematic Diagram Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:
requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Exhibit Type
(ie- External Photos, Internal Photos, Test Setup Photos, Manual) External Photos Test Setup Photos Internal Photos User Manual File Name
(ie- 1100_external photos.pdf) External Photos Test Setup Photos Internal Photos User Manual Sincerely,
(signature)
(printed name): Henry Xu Date: 8/24/2022 Rev 11/20/07
1 | FCC SDOC | Attestation Statements | 343.63 KiB | September 13 2022 |
Shenzhen Fine Offset Electronics Co., Ltd. A, 4/F, Bldg.C, Dist.A, Minzhu Jiujiu Ind. City, Xihuan Rd., Shajing St., Baoan Dist. Shenzhen, Guangdong, China Date: 05/18/2022 FCC ID: WA5WN67BN Model Number: WN67BN, WN67 To:
Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Fine Offset Electronics Co., Ltd. declare that this EUT (FCC ID:
WA5WN67BN) will conduct FCC compliance testing, the sDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely, Name: Henry Xu Phone: 008675586106171 Fax: 008675586106173 Email: sales@foshk.com
1 | Models Declaration Letter | Cover Letter(s) | 101.74 KiB | September 13 2022 |
Shenzhen Fine Offset Electronics Co., Ltd. Family models declaration letter. 8/24/2022 We Company: Shenzhen Fine Offset Electronics Co., Ltd. Address: A, 4/F, Bldg.C, Dist.A, Minzhu Jiujiu Ind. City, Xihuan Rd., Shajing St., Baoan Dist. Shenzhen, Guangdong, China Product: Weather Station (Transmitter) Model Name: WN67BN Family Model: WN67 All models are the same circuit and RF module, except packaging is different Thanks Sincerely, Signature
[Name] Henry Xu
[Title] manager Shenzhen Fine Offset Electronics Co., Ltd.
1 | Power of Attorney Letter | Cover Letter(s) | 45.25 KiB | September 13 2022 |
(Shenzhen Fine Offset Electronics Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 05/18/2022 SUBJECT: FCC Application for FCC ID: WA5WN67BN To Whom It May Concern:
We, the undersigned, hereby authorize Alex Li at Shenzhen NTEK Testing Technology Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen NTEK Testing Technology Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,
(printed name): Henry Xu E:\\CE \\WN1965 +WN67BN FCC\letter\FCC POA Letter.docx
1 | Test Setup Photos | Test Setup Photos | 288.22 KiB | September 13 2022 / March 13 2023 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-09-13 | 915 ~ 915 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-09-13
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Fine Offset Electronics Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0017765033
|
||||
1 | Physical Address |
A, 4/F, Bldg.C, Dist.A, Minzhu Jiujiu Ind. City, Xihuan Rd., Shajing St., Baoan Dist.
|
||||
1 |
A, 4/F, Bldg.C, Dist.A, Minzhu Jiujiu Ind.
|
|||||
1 |
Shenzhen,Guangdong, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@timcoengr.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WA5
|
||||
1 | Equipment Product Code |
WN67BN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H**** X******
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
00867********
|
||||
1 | Fax Number |
00867********
|
||||
1 |
s******@foshk.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/13/2023 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Weather Station (Transmitter) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen NTEK Testing Technology Co., Ltd.
|
||||
1 | Name |
A****** L******
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
c******@ntek.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 915.00000000 | 915.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC