PE805A 105 80mm Quick Start VersionV1.0 85mm 1 Using for the rst time 2 Download the App 2.1 Connect to the App 1 2 Open the package;
Take the main device out from the silicone clip;
Find Moofit from the App store or scan the following QR code to install the App. First Time Connection 1 Turn on the Bluetooth: Setup - Bluetooth - Turn on the Bluetooth Do not try to find or pair with the device on this page. 3 After succeed, you may sync the data by pulling down the page. The word "synchronizing" will be showed on the upper left corner. During synchronizing please wait till the word "synchronizing"
disappear. Steps
.... synchronizing the silicone clip the main device MooFit 3 4 5 Pull out the insulation sheet from the back of the main device The light of the main device starts to flash, which means the main device starts to work;
Replace the main device back into the silicone clip. Pull out the insulation sheet The light flashes 3 4 5 1 2 Setup Bluetooth on 2 Open the App, register and log in. Place the device near the phone,
(recommended within 1m). Enter device center-add new device
-search device. Select MOVE, to start paring. 4 Device management: Enter personal center by touching the icon
. In the sub-menu of device management, you may check the current paired device, or delete paired device by sliding to the left and select delete , for Androids, hold the device name to delete. Me Pair
-88 MOVE Pair Device Management My Device MOVE Delete Succeed 3 You need to activated the device for the first time using and after the battery replacement. 4 3 How to check the progress 4 How to wear the device 5 How to replace the battery 6 Trouble Shooting 7 Component list Double tap the device:
If the white LED is on, the device haven t been activated, need to activated the device in the App(check part 2.1 to connect to the App). 1 2 3 4 Twist the battery door counter clockwise by a coin;
Replace the battery;
Twist the battery door clockwise to install the battery door;
The light of the main device will flash(last about two seconds) after the battery door has been tightened. And the device can be paired on the App, the data can be synchronized. Then the battery has been successfully replaced. If not, please check up whether the battery replacement process is correct. 5 1 2 6 To avoid danger, batteries should be kept away from the children's area. 7 1 2 3 4 How to turn on the device s Bluetooth?
The product is no button design, once powered up, the Bluetooth will be on, without any trigger. The device can t be found during pairing?
a. Make sure the Bluetooth on the phone has been turned on. b. The battery may has been run off, please replace the battery. Successfully paired, the data can t be uploaded?
a. Please make sure the device is within the wireless reception range of the mobile phone, recommended within 1m. b. Check the connection status of the device in the upper left corner of the App, if Device disconnected is displayed, please check if battery replacement is necessary. Double click on the device but no flashing light?
a. The strength level of the click may affect the trigger of the light, please try with different strength. b. Check if battery replacement is necessary. 8 Main device Silicon clip Wrist band
(optional) Quick Start User manual Strap
(optional) 9 V1.0 1 1 2 2 App App"MooFit",App 2.1 App App
----
1 MooFit 3 4 5 3 4 5 1 2 App, ,
( 1m
"MOVE"
MOVE
-88 2 3 3
:2.1app
<25%
=25% 25%<<50%
4
=50% 50%<<75%
=75%
75%<<100%
5
;
;
;
App 1 2 3 4 1 2 2 1 6
?
?
a b
?
a 1m b App
?
a b 3 4 3 App
... ... 4 App " "
" "
( ""
MOVE 7 4
() 5 6 7 8
() 9 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.