SR428 105 78mm 2016-5-23 120mm Bluetooth Jump Rope Quick Instruction Version: May 23 2016 1 A *1 B *1
(CR2032
*1
+ *2
*1 2016-5-23 CR2032 *1 1 Parts Handle A *1
(CR2032 battery installed) Handle B *1 Long Rope *1 Short Rope + Weight *2 Quick Instruction *1 Bluetooth Jump Rope Quick Instruction Version: May 23 2016 CR2032 Battery *1 2 1. 2. 3 1 2 3 4 App App"+"" Jump+", App. 4-1 App App
----
1
+
2 3 4 App App
------
SR428-000XXX
, 5 1 2 +
3 6 1. 2.
, 3. 1. 7
-88 SR428-0000
!
2 Assembly 3 Adjust the Rope 4 Download the App 4-1 Connect to the App 5 Change the Battery 1. Choose the surface hole the grooves to start reeving the rope in. 2. Reeve the rope back in through the hole with grooves and tighten it. 1 Stand on the rope with your feet as shown. 2 Hold the handles with both of your hands and pull the rope, adjust the length so that the handles are positioned right under your armpit. 3 Jump a few times to make sure the rope is just touching the ground when jumping. You may change the length according to your needs. Search "coospo" and nd "Jump+" from the App store or scan the following QR code to install the App. Jump+
First Time Connection 1 2 3 4 on Setup Bluetooth Turn on the Bluetooth: Setup -
Bluetooth - Turn on the Bluetooth Do not try to nd or pair with the device on this page. Open the App, register and log in. Enter the home page, touch the upper left corner prole icon. Enter device center - add new device - Bluetooth Jump Rope - Search device (and rotate the handle A twice). Select the device name SR428-000XXX to start paring. After succeed, you may start your training by going back to the home page. 1 Open the battery door using a coin. 2 Take out the old battery and insert the new one;
Please make sure that the + side is up. 3 Put the battery door back to the main body, the mark in the battery door and the main body should be aligned, tighten the battery door with a coin. Add Device Add Device Add Device Bluetooth Jump Rope
-88 SR428-0000 Succeed old battery, Please dispose the used battery according to local regulations. To avoid danger,please keep batterise out of children's reach
!
6 SR428 4.0 10 CR2032 12 3 4.3 , 4.0 iPhone 4s/5/5c/5s/6/6 Plus iP od t ouch 5 iP ad 3/4/ Air/mini 6 FAQ What if......?
......Sync failed or connection is unstable?
1.Restart your mobile device and reconnect to the rope. 2.You might have been in a strong electromagnetic environment. Strong electromagnetic signals can cause erratic readings. Please check the environment and stay away from the interference. 3.The battery is running out, please change the battery immediately. .....The program crashed?
1.The cell phone might be out of memory, please clean up the memory. 6 Technical Specications Model number: SR428 Wireless transmission: Bluetooth 4.0 Transmission distance: 10 meters Battery type: CR2032 Battery life: 12 months Rope length: 3 meters Compatibility: iPhone 4s/5/5c/5s/6/6 Plus iPod touch 5 iPad 3/4/ Air /mini Any android device with Bluetooth 4.0 and operation system of android 4.3 or later. Disclaimer The product it describes are subject to change without prior notice, due to the manufacturer's continuous development program. Our company makes no representations or warranties with respect to this manual or with respect to the products described herein. Our company shall not be liable for any damages, losses, costs or expenses, direct, indirect or incidental, consequential or special, arising out of, or related to the use of this material or the products described herein. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.