FCC ID: 2ACN7HW702AE Heart rate Armband

HW702 LOGO 105 60mm 1. Product Introduction 3. Basic Parameters 4. Function and Operation USER MANUAL Thank you for purchasing our ANT+ & BLE heart rate Product size: 46.78x34.58x11.58mm armband, this product is one of the heart rate monitors of our company, which transmits the real-time heart rate Host weight: 10.5g Turn-on: Press the start-up button, the LED light will flash blue quickly, indicating the heart rate searching. As the heart rate has been detected, the light will flash REAR VIEW data through Bluetooth or ANT+ to heart rate receiving Power: Rechargeable lithium battery slowly. 76mm device, sports and health App, helping you to manage your exercise intensity scientifically. This user manual will help you to use the product better, please keep it for reference.(This product is for sport purposes only and it is not meant to replace any medical advice). 2. Product Accessories Heart rate monitor/

armband charging cable user manual Battery life: 20 hours for continuous hear t rate monitoring start-up button LED Water resistance: IP67 Working temperature: 0

~45 Transmission: ANT+, BLE Turn-off: Press the start-up button when not in use, the LED light will flash red quickly, then enter the shutdown state. POWER:

a. When you press the start-up button,if the LED light flashes red several times. It shows that the battery is low and need to be charged;

b.The LED light will flash red and green alternately while charging. After full charge the LED will show green continuously;

!!Remove Protective Sticker!!

HEART RATE SENSOR CHARGING TERMINALS ARMBAND CHARGING CABLE 5. Disclaimer The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer's continuing research and development plans, without making an announcement in advance. We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product. Wearing: Wear armband on the upper portion of the forearm. Sensor should be on the inside or top of forearm. It should be worn snug enough not to move on your arm, but NOT so tight that it restricts arm circulation. Initial Setup with Bluetooth Smart Fitness Apps 1. Set Bluetooth on the device to ON. 2. Find the Sensor Settings menu in the Bluetooth Smart Fitness App. 3. Connect the this device armband by turning it on. Initial Setup with Bluetooth Smart devices

(Spor ts Watches ,Fitness Equipment & GYM Team Training System.) 1. From the device settings menu select Add HR sensor 2. Connect the this device armband by turning it on. Compatible Apps MooFit, Wahoo Fitness, Strava, Runtastic.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

ShenZhen Fitcare Electronics Co., LTD Agent Authorization Company: ShenZhen Fitcare Electronics Co., LTD Address: 6th floor(south), Building A, Dingxin Science Park, Hanglang North 2nd Road, Bao'an, Shenzhen, China. Product Name: Heart rate Armband Model Number(s): HW702AE, HW702A,HW702E, HW702B, HW702BE, HW702C, HW702CE, HW702AC, HW706, HW706V, HW706C, HW706D, HW706S, HW706H, HW706B, HW706M, HW701, HW702, HW703, HW3, HW4, HW706A, HW706AE, HW706E Product Description: Heart rate Armband We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Jason Yang Company: ShenZhen Fitcare Electronics Co., LTD Date: 2021-09-23

ShenZhen Fitcare Electronics Co., LTD Sep.23, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2ACN7HW702AE Model Number: HW702AE, HW702A,HW702E, HW702B, HW702BE, HW702C, HW702CE, HW702AC, HW706, HW706V, HW706C, HW706D, HW706S, HW706H, HW706B, HW706M, HW701, HW702, HW703, HW3, HW4, HW706A, HW706AE, HW706E To Whom It May Concern:

We, The ShenZhen Fitcare Electronics Co., LTD hereby declare that the models are identical except the mode, item No., or color , or decorations. Except for the different above, no other modification is performed. Sincerely, Signature:

ShenZhen Fitcare Electronics Co., LTD Contact person: Jason Yang

ShenZhen Fitcare Electronics Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:

Date: 2021-09-08 2ACN7HW702AE To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ShenZhen Fitcare Electronics Co., LTD Contact person: Jason Yang