FCC ID: 2ACN7HRM828 Heart rate Monitor

USER MANUAL BLE & ANT Heart Rate Monitor English V0.7 Product Introduction Thank you for purchasing this product, this is a heart rate monitor with wireless Bluetooth and ANT+

functions, it can transmit heart rate data to your receiving device and sports health App in real time via Bluetooth or ANT+, so that you can manage your exercise more scientifically. And the IP67 waterproof can effectively prevent sweat from the device during exercise. This manual can guide you how to use the product, please keep it for reference.

(Notice: This product is for sport purposes only and it is not meant to replace any medical devices.) Basic Parameters Connectivity: BLE(25 meters), ANT+(10 meters) Battery Life: Last 50 hours after being fully charged LED: Display different colors in different heart rate zones Heart Rate Alarm: Audible alarm(off by default) Data Storage: 13 hours(one value every 2 seconds) Dimension: 59.5x27x10.4mm Host weight: 12g Waterproof: IP67 Operating Temperature: 5~40 Product Accessories Main Device x1 Charging Base x1 TYPE-C Cable x1 Chest Strap x1 User Manual x1

- 1 -

How to use Notice: When the heart rate monitor is not worn, it will be off and enter sleep mode and cannot be searched. Once the heart rate monitor is worn correctly, it will be automatically turned on and work. Wearing 1. Moisten the electrode areas of the chest strap. 2. Attach the connector to the chest strap, pay attention to distinguish the left and right. L R 3. Adjust the strap length to fit tightly but comfortably, make sure that the moist electrode areas are firmly against your skin, pay attention to distinguish the left and right position(L towards left, R towards right).

(As the figure show)

- 2 -

Heart Rate Zone LED Color LED Once the heart rate monitor is worn correctly, it will be automatically turned on and the LED will flashes white

(Heart rate alarm function is turned on: When the device is turned on, it will not beep. Heart rate alarm function is turned off: When the device is turned on, it will beep). When the heart rate is detected, the LED will display different colors according to the heart rate zones, as the table shown below:

Zone Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Color White Blue Green Zone(Default) Below 60%MHR 61%~70% MHR 71%~80% MHR Orange 81% ~ 90% MHR Red Above 91% MHR

* Max Heart Rate Value(MHR)=180bpm(Default) Heart Rate Alarm When the heart rate is higher than the alarm value, the device will beep. By default, the alarm mode is turned off and can be turned on through the App settings.

- 3 -

Charging 1.For the first time using the device, it may need to be charged before it can be turned on. 2.Please use DC 5V power adapter to charge the device. 3.The LED shows red during charging, shows green after fully charged. Connect the charging cable to the port of the charging base Put the heart rate monitor on the charging base Connect the charging cable to USB DC 5V power adapter Compatible with multiple Apps MooFit / Endomondo / Sports Tracker / Runtastic / Wahoo Fitness Applicable Models IOS7.0 or above, iPhone 4s and above models Android 4.3 and above, with Bluetooth 4.0 Responsibility Disclaimer The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer's continuing research and development plans,without making an announcement in advance.

- 5 -

We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product.advance.

- 4 -

FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

ShenZhen Fitcare Electronics Co., LTD Agent Authorization Company: ShenZhen Fitcare Electronics Co., LTD Address: 6th floor(south), Building A, Dingxin Science Park Honglang North 2nd Road, Bao'an, Shenzhen, China Product Name: Heart rate Monitor Model Number(s): HRM828, HRM828E Product Description: Heart rate Monitor We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2020-10-26 Name:

Jason Yang Company: ShenZhen Fitcare Electronics Co., LTD

ShenZhen Fitcare Electronics Co., LTD Oct.26, 2020 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2ACN7HRM828 Model Number: HRM828, HRM828E To Whom It May Concern:

We, The ShenZhen Fitcare Electronics Co., LTD hereby declare that the model :

HRM828E is identical with the model : HRM828, except the model name. Except for the different above, no other modification is performed. Sincerely, Signature:

ShenZhen Fitcare Electronics Co., LTD Contact person: Jason Yang

ShenZhen Fitcare Electronics Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-10-22 Subject; Request for Confidentiality FCC ID: 2ACN7HRM828 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ShenZhen Fitcare Electronics Co., LTD Contact person: Jason Yang