FCC ID: 2ABUP-FT1211R DC Motor Controller

USERS MANUAL FCC Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)thisdevicemaynotcauseharmfulinterference,and

(2) this device must accept any interference received, including interference that may cause undesiredoperation. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheuser'sauthoritytooperatetheequipment. NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device, pursuantto Part15 ofthe FCCRules. These limits are designed to provide reasonable protectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates, usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor moreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. 1. MainFunctionDescription Theremotecontrollerhasseveralcontrolfunction,itcancontroltheceilingfansystemto on/offlight,runorstoprotate,changetherotatespeedandsoon.Itincludeseveraltypeof keys:

(1).ceilingfanon/offorrundirectionfunctionkey(1key)

(2).lampfunctionkey(1key)

(3).ceilingfanspeedfunctionkey(5keys)

(4).ceilingfanrundirectionkeyorstopkey(1key)

(5).ceilingfantimingstopfunctionkey(3keys)

(6).Ledindicatorforpowerandsignal

(7).12vbattery 2. KeyFunctionDescription 2.1State specifies Stop state: Ceiling fan motor in a stopped state , the blade is static Run state: Ceiling fan motor in running state, the blade in a rotating state. 2.2Remote controller operating instructions Remote control function generally includes ceiling fans stop and run, speed gear, lamp switch, ceiling fans timing stop, and other functions. Specific as follows:

A. Ceiling fan stop or run (Fan on/off key) This button is only affect fan motor run or stop, will not affect the light status. In stop state, press this button will start the fan blade rotation, speed when finally reach to the last setting speed. In run state, press this button will make the fan blades stop running. B. Ceiling fan gear switch(number keys) These buttons are only affect fan motor run or stop, will not affect the light status. In stop state, press these keys (five or six buttons), fan motor start rotate, and speed will maintain in the corresponding gear speed. In running state, press these keys, the fan speed can directly adjust to the corresponding gear. The smaller the value of gear, such as 1, the speed is lower, the greater the value, the higher the speed. C. Ceiling fan timing stop (timing stop keys) These buttons are only affect fan motor start or stop, will not affect the light status. There are three key regularly, respectively time 1 hour, 2 hours, 4 hours, or some other time, the identification shall prevail. They will only has function in the case of a ceiling fan running ,in stop state, pressing these buttons have response, but no corresponding function. If in the case of ceiling fans is in stop state, press the timing button, and then press any other key, ceiling fans will start, and automatic cancel the timing stop function. Under the running status, press timing keys, and then press stop button again, the fan stops and timing stop function cancel. In running state, press timing stop key, then press gear keys or FF/FR key, does not affect the timing stop function, ceiling fans will stop after corresponding time. In running state, if you press timing stop key several times, the timing time will start based the last press time. D. Ceiling fan FF/FR rotate (FF/FR key) This button is only affect fan motor start or stop, will not affect the light status. In stop state, press this button to start the ceiling fans directly. The direction is in the opposite direction, and the speed is maintain the previous speed . In running state, press this button will make the fan reversal E. Lamp on/off (lamp on/off key) This button only affects the light of lamp, does not affect the state of the ceiling fan. That pressing this button will control the lights on or off by turns or process a dimming function.

Key Finder Model No. :TZ-K320 FCC ID: 2ABBV-KEYFINDER This device complies with part 15 of the FCC Rules. Operation is subject To the following two conditions:

(1)This device may not cause harmful in interference, and

(2)this device must accept any interfence received, including interference that may cause undesired operation MADE IN CHINA DC Motor Controller MODEL No.: FT1211R FCC ID: 2ABUP-FT1211R

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (current) Revision History To 1.0 2.0 3.0 From 1.0 1.0 2.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 SHENZHEN FUNPOWER GENERAL TECHNOLOGY CO., LTD. 2014-2-15 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, SHENZHEN FUNPOWER GENERAL TECHNOLOGY CO., LTD. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s):

FCC ID: 2ABUP-FT1211R DC Motor Controller, FT1211R We affirm that between SIEMIC and SHENZHEN FUNPOWER GENERAL TECHNOLOGY CO., LTD, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Signature Yi Chen /Marketing Manager E-mail:

Phone:

Fax:

Address simon_chen@szfunpower.com

+86-755-27586889

+86-755-27586887 East 6/F, Building B, Chiwan Industrial Park, Shaodi Road, Shekou, Nanshan, Shenzhen, PRC. SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0

Confidentiality Request Letter SHENZHEN FUNPOWER GENERAL TECHNOLOGY CO., LTD. 2014-02-15 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality Request for FCC ID: 2ABUP-FT1211R We hereby request confidential treatment of information accompanying this application as outlined below:

- Block diagram

- Operation description

- Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Yi Chen /Marketing Manager E-mail: simon_chen@szfunpower.com Phone: +86-755-27586889 Fax: +86-755-27586887 Address: East 6/F, Building B, Chiwan Industrial Park, Shaodi Road, Shekou, Nanshan, Shenzhen, PRC.