Soundbar User Guide For LSP-902(C) Please read this instruction carefully before use Safety Caution Symbols in these instructions Warning Danger to human being Caution Potential danger to devices or other objects Important safety instructions This device is designed and manufactured to ensure your personal safety. However, improper use can result in a potential electrical shock or fire hazard. Please read all safety and operation instructions carefully before installation and use, and keep these instructions for future reference. Please pay attention to all the warnings listed in these instructions and devices. 1. Water and fog The device should not be used near water. For example: near a bathtub, wash basin, kitchen sink, laundry tub, swimming pool or basement. 2. Ventilation Stay away from areas that affect the heat dissipation of the device (for example: beds, sofas, bookcases or cabinets) and keep the air flowing while the device is playing. 3. Heat source The device should be kept away from heat sources such as heaters or other heat generating appliances (including loudspeakers). 4.Power supply The device may only be connected to a power supply of the type described in the operating instructions or marked on the device. 5. Power cable protection The power cord should be well placed and not trampled or squeezed by other objects. If you do not use this device for a long time, pull out its power cable plug from the socket. 6. Clean This device can only be cleaned with dry cloth. 2 7. Debris and liquids Do not allow debris or liquid to enter the device from the opening. 8. Accessories Please dont use accessories that are not recommended by the manufacturer. 9. Lightning and surge protection Unplug the device from the wall socket. This prevents damage to the product due to lightning strikes and power line surges. 10. Overload Please dont load too much equipment in the wall socket or drag online, otherwise it may lead to electric shock risk. 11. Maintenance In the following cases, this device should be by qualified maintenance personnel to carry out maintenance a. the power cord or plug is damaged b. Object falling or liquid splashing into the housing of the device. c. The device was drenched in rain d. The device is dropped or the shell is damaged e. The device cannot operate normally or its performance has obvious changes 12. When the device is not in use If the device is not used for a long time, such as a month or more, the power cord should be unplugged from the device to prevent damage. 13. Repair Please dont remove any cover, internal device or adjust the internal device without authorization. Please leave it to our professional personnel for repair. 14. Warning
- Refer to the manual, or the information on the bottom of the device housing, for electrical parameters and safety information before installing or operating the device.
- To reduce the risk of fire or electric shock, dont expose the device to rain or humidity. The device shall not be exposed to dripping or splashing water, and shall not be placed on the device with liquid objects, such as vases.
- The power plug is used to disconnect the power supply of the device. When it is used up, the power cord should be unplugged and kept safe and ready for operation at any time. 3 The following symbols can be found on the device and should indicate the following information. The lightning symbol warns users of dangerously high pressure inside the enclosure An exclamation mark indicates that important instructions or maintenance instructions in the accompanying guide should be noted. 4 Product function Soundbar 1. LED display panel 2. Remote control receiver 4. 3.5MM audio input port 7. DC power input port 10. Power button 5. HDMI eARC/ACR port 8. Volume-
11.Volume-
5 3. USB interface. 6. Optical fiber interface 9
. Input source Remote control 1.Power Press to turn on or off 2.Input Press to change the input source 3. Volume +(up) Press to increase volume 4. Previous Switch the previous song in the BT/USB input 5.Enter/Play /Pause Press to select an option Press to play or pause 6.Next Switch to the next song in the BT/USB input 7. Volume -(down) Press to decrease volume 8.Bluetooth Short press to check Bluetooth status long press to disconnect the current connection, and re-enter the Bluetooth pairing state 9. Mute Press to mute/unmute 10.DIM Press to adjust display brightness 11. Sync Long press to enter Audio Sync settings, then short press the up/down key to adjust and short press to exit Audio sync Settings. 12. 3D Surroun press to turn on/off 3D Surround mode . 13.Night Short press to enable/disable night mode. 6 14.Bass Long press to enter the Bass Settings, then short press the up/down key to adjust, and short press to exit the Bass Settings 15. E Q Switch three modes: MUSIC, MOVIE and NEWS 16. Treble Long press to enter Treble Settings, then short press the Up/down key to adjust, and short press to exit Treble Settings Battery installation Open the battery case at the bottom of the remote control. Insert two AAA/R03 1.5V batteries and close the battery case (be noted about the correct polarity, see Battery case section). Attention If the remote control is not used for a long time (more than one month), please remove the battery, because the battery may leak and damage the remote control. Notices about the batteries 1. If the battery leaks, wipe the leakage from the battery case and replace the battery with a new one. 2. Please do not use other batteries which are not specified by the device.. 3. Please do not heat or remove the battery and throw them into fire or water. 4. Please do not carry or store other metal objects with the battery. Otherwise, the battery may short circuit, leak or explode. 7 Product connection and use Connect the soundbar to the TV Connect to the TV through HDMI eARC/ARC Connect the HDMI cable to the TV (HDMI eARC/ARC) port and the audio HDMI eARC/ARC port. The HDMI CEC is set to be on in TV setting, the soundbar is set to
"external sound" in the TV setting, and the soundbar is set to eARC/ARC mode. Soundbar and TV Connect to the TV through fiber optics A fiber cable is used to connect the TV fiber output interface and the audio fiber input interface. The soundbar is set as "sound system" in the TV setting, and the soundbar is tuned to the fiber mode. Soundbar and TV Connect to the TV through Bluetooth After the soundbar is powered on, press the power button to start, and set the input mode to Bluetooth (BT). In the TV Settings, find Bluetooth and click Search. After searching for the soundbar name LSP-902(C), click Confirm to automatically connect. 8 Soundbar and TV Connect the soundbar to (set-top box, player, Blu-ray DVD, computer etc.) Connect to other devices via fiber optic cable Use a fiber optic cable to connect the fiber optic output connector of other devices (set top box, player, Blu-ray DVD, computer) to the soundbar fiber optic input connector. Connect to other devices via AUX cable Use an AUX cable to connect the left and right channel output jacks of other devices (set -
top box, player, Blu-ray DVD, computer) to the Soundbar AUX input jacks. The audio output mode of other devices (set-top box, player, Blu-ray DVD, computer) should be set to PCM mode. Connect the bar to mobile phone Connect to your phone via Bluetooth After power on, press the power button to turn on the soundbar, turn the input mode to Bluetooth state, then find the Bluetooth in the phone settings and tap Search, after find the Bluetooth which name is "LSP-902 (C)", tap to confirm and it will connect automatically. 9 Product operation Instructions 1.When the Soundbar is connected to the 220V power socket with the power adapter
(24V/2A), the soundbar enters the standby mode. 2.Press the power button of the remote control or the power button of the soundbar to turn on the soundbar, when the display of the front panel shows "HELLO", it is turned on. 3.According to the way you choose to connect the soundbar
, press the switch mode button on the remote control or the button on the soundbar to switch the input mode
(BT, OPT, AUX, USB,HDMI eARC/ARC). 4.When switching to USB mode, you need to insert a USB flash drive containing music files in the back panel of the device to play. 5.When you want to switch to the BT (Bluetooth) mode, you need to turn on your other devices (TV, cell phone, etc.) for Bluetooth pairing. NOTE: When you switch the connection mode, the corresponding mode information is displayed on the front of the soundbar. Bluetooth Play Bluetooth Play Manuals:
This soundbar has built-in V5.0 Bluetooth receiver module, which supports Bluetooth connection with other external devices to play music, with an effective receiving distance of about 10 meters (depending on the surrounding environment). Due to the different manufacturers, models and software versions of devices on the market, it is impossible to guarantee that this soundbar is compatible with all external Bluetooth devices. Some notes about Bluetooth pairing 1Before using this soundbar with external devices (such as TV, mobile phone, tablet, etc.), it must be connected to the soundbar via BT pairing. 2Make sure the external devices (such as TV, mobile phone, tablet, etc.) with Bluetooth function and turn it on. 3When the soundbard is turned on and switched to Bluetooth mode, the word "BT" on the LED display will flash. And when the word "BT" stops flashing, it means the pairing is successful. 4Refer to "page 8 and 9" for connecting TV and mobile phone via Bluetooth connecting Note: If the soundbar is connected to a mobile phone via Bluetooth to play music, when playing music, the phone receiving an incoming call, the soundbar will pause to play music, and the phone call sound is not played through the soundbar. After the call is over the soundbar will automatically continue to play music. 10 Troubleshooting If a malfunction occurs, check the following points before sending the device for repair. Due to the risk of electric shock when servicing this unit, users should not open the soundbar to view the internal structure. If you cannot solve the problem by following the instructions below, please consult the dealer or service center. Warning: Under no circumstances should you attempt to repair the equipment yourself, as this will void the warranty. malfunction possible cause solution The device is not connected to the soundbar The volume is too low Mute function is turned on The device cannot pair with the soundbar Other devices have been connected to the soundbar via BT 1) Check if the connection cable is damaged, or the jack is loose. 2) Check whether the soundbar is switched to the right input source Increase the volume of the soundbar Increase the volume of the audio source Press the mute button to turn off the mute function Check if the audio source supports A2DP norm Check if other devices are already connected to the soundbar via Bluetooth. Bluetooth version is not supported Use other playback units Bluetooth device is out of signal receiving distance Move the Bluetooth device to the distance where the Bluetooth signal from the soundbar can be received.
(No obstructions within 10 meters) Low battery replace a new battery This USB format is not compatible with the soundbar Replace other USB driver The soundbar has no sound output The device plays via Bluetooth, no sound from soundbar Output The soundbar occurs stuck issue or in snatches when playing via Bluetooth The remote control does not operate properly When playing via USB, the soundbar has no sound 11 Technical Specification Main engine power input.......................................................................DC24V2A~50-60Hz Rated power.................................................................................................60Wrms, 120Wpeak Standby power consumption..................................................................................... 0.5W Remote Control Battery...................................................................................3V2 x AAA/R03 Remote control distance ...................................................................10 meters(angle30) Output Power...........................................................................................................15Wx2+30W Full range........................................................................................................2 x 2" 8 Ohm 15W Woofer..........................................................................................................2 x 2.5" 8 Ohm 15W Frequency response..............................................................................................50Hz-20KHz Product size ...................................................................................................900 x 92 x 70 mm Bluetooth Bluetooth version ......................................................................................................... V5.0 Transmitting range ..................................................................................................... 10 Meters Transmitting frequency ............................................................................................. 2.4 GHz Audio transmission protocol ..................................................................................... A2DP 1.2 Bletooth matching name ........................................................................................ LSP-902(C) Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works.Copyright 2012-2021 Dolby Laboratories. All rights reserved. 12 FCC STATEMENT Main engine power input NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance between user and device should be no less than 20cm. Product installation instructions Product installation method Place the soundbar on the TV cabinet
Hang the soundbar on the TV wall 744mm 744mm 3 1 2 13