FCC ID: 2AOCR-GSSB60S Soundbar

GS-SB60S Soundbar INSTRUCTION MANUAL Functions.......................................................... 1-2 Whats In The Box............................................ 3 Instructions Guide........................................... 4-6 Connecting to the Mains Supply...................................... 4 Bluetooth Operation.......................................................... 4 Using the USB Input.......................................................... 5 Using the RCA Input.......................................................... 5 Using the Optical Input..................................................... 6 Using the AUX Input.......................................................... 6 Troubleshooting.............................................. 7 Wall mount Installation................................... 8 Features & Specifications.............................. 9 Safety Information........................................... 10 Support & Warranty......................................... 11 FUNCTIONS 1 FUNCTIONS Using the Remote Control The remote control sensor at the front of the soundbar is sensitive to the remote control's commands up to a maximum of 8 metres away and within a maximum arc of 30 degrees. Please note that the operating distance may vary depending on the brightness of the room. 2 WHATS IN THE BOX BOX CONTENTS GS-SB60S Soundbar X 1 Remote control(batteries not included) X 1 Power adaptor X 1 OPTICAL cable X 1 RCA cable X 1 AUX IN cable X 1 Wall mount kits X 1 3 INSTRUCTIONS GUIDE Connecting to the Mains Supply Ensure that the power supply voltage is in the voltage of 100V~240V. This unit is designed to use the supplied adapter only. Connecting the unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. Connect the adapter to the unit via the DC input Socket.(DC-18V-IN) NOTE: Ensure all audio connections of the unit are connected before connecting to the mains power socket. Bluetooth Operation Pairing a Bluetooth Device for the First Time. Press the POWER button on the unit or the POWER button on the remote control to switch on the unit. Select and press the MODE button repeatedly on the remote control until in Bluetooth mode or press the Mode button repeatedly on the soundbar to enter Bluetooth mode. Using the controls on your Bluetooth device, select the "GS-SB60S" in your Bluetooth settings to pair. Refer to the user manual for your specific device for instructions on pairing and connecting Bluetooth devices. When successfully paired and connected, a beep will issue from the unit. After initial pairing, the unit will stay paired unless unpaired manually by the user. If your device should become unpaired or you find it is unable to connect, repeat the above steps. Playing Audio Wirelessly Follow the instructions for pairing a Bluetooth device. Use the controls on the connected Bluetooth Device to select a track. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control. Audio played through the connected Bluetooth device will now be heard. 4 INSTRUCTIONS GUIDE Using the USB Input Insert a USB drive to Play Music Automatically. Select and press the MODE button repeatedly on the remote control until in USB mode or press the Mode button repeatedly on the sound bar to enter USB mode. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control. Audio played through the connected USB device will now be heard. Using the RCA Input Use an RCA Stereo Audio Cable (included) to connect to the TV's stereo RCA (L/R) audio output sockets. Connect the audio output cable of the soundbar via the 'RCA input sockets of the unit. Then press MODE on the remote control or press the Mode button on the unit to scroll to the RCA function. Turn on your television. Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the RCA cable is being connected to the 'output 'RCA port on your TV set. This will ensure that the sound is being exported correctly. If your TV does not have 'output' RCA port, please use an alternative connection method. 5 INSTRUCTIONS GUIDE Using the Optical Input You will need: An audio source with an Optical Audio Output and an Optical cable(included). Connect the Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar. Press the POWER button on the soundbar or POWER button directly on the remote control to switch on the unit. Press the MODE button on the remote control to switch to Optical mode or select the MODE button on the main unit press repeatedly to select the Optical mode. Using the controls on your connected device, make sure the audio settings are set to PCM or Audio and are turned On. Audio from the connected audio source will now be played through the speakers. Using the AUX Input Plug one end of a 3.5mm to 3.5mm Aux In cable (included) into the AUX In port on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs. Then plug the other end of the cable into the audio output or an MP3 player or other audio source. Press the Power button on the soundbar or Power button directly on the remote control to switch on the unit. Press the Mode button repeatedly on the soundbar or press the MODE button on remote control repeatedly to enter AUX mode. Audio played through the connected device will now be heard through the speakers. 6 TROUBLESHOOTING If the soundbar does not work properly as desired, please check the following, Malfunction Possible Cause/ Measures No power / function No sound No sound from Bluetooth connection Function disturbance Check whether the power is switched on or off at the wall. Check whether the power adaptor is properly connected to power outlet or not. Check whether cables are properly installed. If they are, please try alternative cable to connect to your TV if possible. Check unit is out of standby and in mode. Disconnect the soundbar from your device and reconnect. Switch off and unplug the unit. Leave it for 2 minutes and switch it on again. If a particular mode is causing problems, please try an alternative connection to your TV such as Optical or Bluetooth. Remote control does not work [properly]

Check whether the batteries have run out or not. Replace with a new ones if necessary. Check whether there is an obstacle blocking the remotes signal. 7 WALL MOUNT INSTALLATION 8 FEATURES & SPECIFICATIONS Features Speakers: 30W RMS power & 75W peak power Full-range speakers with super bass Compatible with most TV's for home theatre sound Wireless Bluetooth speaker

-connect to your TV, PC, Laptop, Computer, Smartphone, Tablet LED display panel Crisp & clear sound with deep base 3 sound modes (Music, Movie, Voice) Base & Treble controls Easy controls 5 Input modes: Optical, RCA, USB, AUX (3.5mm), Bluetooth RCA/AUX/OPTICAL cables included Remote control (included)

-requires 2 AAA batteries (not included) Specifications Bluetooth chipset: 5.0 Bluetooth profiles: A2DP, AVRCP, SPP Bluetooth frequency range: 2.402-2.480 GHZ Wireless range: 10M (open area) Power supply: AC100~240V/50~60Hz, DC 18V/1.3A Speaker power: 30W (2 x 15W) Speaker channel: 2.0 9 Safety Information Install in accordance with the manufacturer's 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings 4. Follow all instructions 5. Do no clean the apparatus near or with water 6. Do not block any ventilation openings. instructions 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Only use attachments/accessories specified by the manufacturer. 10. Unplug this apparatus during light storms or when unused for long periods of time. 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped. 12. No naked flame sources, such as lit candles, should be placed on the apparatus. 13. Dispose of used electrical products and batteries safely according to your local authority and regulations. ADDITIONAL WARNINGS The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus. Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. RECYCLING ELECTRICAL PRODUCTS You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with. IMPORTANT: Please read all instructions carefully before use and keep for future reference. Risk of electric shock.Do not open Read all instructions carefully before use and keep for future reference. 10 SUPPORT & WARRANTY If you require further assistance with your new soundbar, please contact our team by email. All products come with a standard 12 month warranty. If you have any problem with the product, please feel free to contact us by email. Shenzhen Huilang Electronics Technology Co., Ltd. 301, Building T1, Second Industrial Zone, Xitian Community, Gongming Street, Guangming District sales3@huilatech.com FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. 11

Label location Size:40*20mm Soundbar FCC ID: 2AOCR-GSSB60S This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Product specification Quick Reference Frequenc Range Ant. Port Input Pwr. (dBm) Tot. Rad. Pwr. (dBm) Directivity (dBi) Efficiency (dB) Gain (dBi) Input Impendence(ohm) Polarization Type Manufacturer:

Antenna module on the system board 2400 ~ 2500MHz 0 (Typ. BT class 2 output power)

-1.2 (Input pwr loss pwr) 1 (all direction antenna) 6 0.2 %

1.9 50 Vertical & Horizontal Shenzhen Gosinggo Electronics Co., Ltd. Antenna Layout & module on the system board Return Loss The Environment of Antenna Radiation Pattern Antenna Gain Gain Table Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Module Board 1.2

-0.5 1.9

-3.6 1.1

-3.0 6 0.2 %

Gain Table 3D radiation pattern diagram XY-plane XZ-plane YZ-plane

Shenzhen Gosinggo Electronics Co., Ltd. 2022.10.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Clients signature:

Clients name / title : Carefree Han / Marketing Manager Contact information / address: R302, Bldg B, Tianrun Smart Innovation Industrial Park, No.23, Jiuwei 1st Rd, Hangcheng Str, Baoan District, Shenzhen City, China

Shenzhen Gosinggo Electronics Co., Ltd. 2022.10.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Soundbar Trademark: N/A MODEL : GS-SB60S, GS-SB107, GS-SB110, GS-SB111, GS-SB111S, GS-

SB113, GS-SB201L, GS-SB204L, GS-SB213, GS-SB311, GS-SB313, GS-

SB315, GS-SB318, GS-SB319, GS-SBDT61 FCC ID : 2AOCR-GSSB60S To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the

- Block Diagram

- Schematics

- Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Clients signature:

Clients name / title : Carefree Han / Marketing Manager Contact information / address: R302, Bldg B, Tianrun Smart Innovation Industrial Park, No.23, Jiuwei 1st Rd, Hangcheng Str, Baoan District, Shenzhen City, China

Shenzhen Gosinggo Electronics Co., Ltd. Model Difference 2022-10-13 EUT NAME: Soundbar MODEL : GS-SB60S, GS-SB107, GS-SB110, GS-SB111, GS-SB111S, GS-SB113, GS-SB201L, GS-SB204L, GS-SB213, GS-SB311, GS-SB313, GS-SB315, GS-

SB318, GS-SB319, GS-SBDT61 FCC ID: 2AOCR-GSSB60S All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : Carefree Han / Marketing Manager Contact information / address: R302, Bldg B, Tianrun Smart Innovation Industrial Park, No.23, Jiuwei 1st Rd, Hangcheng Str, Baoan District, Shenzhen City, China