FCC ID: 2AN4C-GS7163 Wireless Headphones

YH-WL500 Owners Manual 3

PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply Do not place the USB cable near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. Do not touch the product or the power plug during an electrical storm. Use only the correct voltage specified for the product. The required voltage is printed on the name plate of the product. Use the specified USB AC adaptor (page 20). Use only the supplied USB cable/plug. Do not use the USB cable/plug for other products. Check the power plug periodically and remove any dirt or dust which may have accumulated on it. Insert the power plug firmly all the way into the AC outlet. Using the product when it is not plugged in sufficiently can cause dust to accumulate on the plug, possibly resulting in fire or skin burns. When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, as long as the USB cable is not unplugged from the wall AC outlet, the product will not be disconnected from the power source. Do not connect the product to an electrical outlet using a multi-plug outlet extender. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. When disconnecting the power plug, always hold the plug itself and not the cord. Pulling by the cord can damage it and cause electric shocks or a fire. If not using the product for long periods of time, be sure to pull the power plug from the AC outlet. Do not disassemble This product contains no user-serviceable parts. Do not attempt to disassemble the internal parts or modify them in any way. Water warning Do not expose the product to rain, use it near water or in damp or wet conditions, or place on it any containers

(such as vases, bottles or glasses) containing liquids which might spill into any openings or places where water may drop. A liquid such as water getting into the product may cause a fire, electric shocks, or malfunctions. Use the USB AC adaptor indoors only. Do not use in any wet environments. Never insert or remove a power plug with wet hands. Fire warning Do not place any burning items or open flames near the product, since they may cause a fire. Wireless unit Radio waves from this product may affect electro-medical devices, such as a heart pacemaker implant or defibrillator implant.

- Do not use the product near medical devices or inside medical facilities. Radio waves from this product may affect electro-medical devices.

- Do not use the product within 15 cm (6 in.) of persons with a heart pacemaker implant or a defibrillator implant. 4 YH-WL500 Owners Manual DMI-10 1/3

(Lithium ion) battery If you notice any abnormality If any of the following problems occur, immediately turn off the power switch and disconnect the power plug from the outlet. If you are using batteries, remove all batteries from the product. Finally have the device inspected by Yamaha service personnel.

- The USB cable or plug becomes frayed or damaged.

- Unusual smells or smoke are emitted.

- Some object, or water has been dropped into the product.

- There is a sudden loss of sound during use of the product.

- Cracks or other visible damage appear on the product. Do not disassemble this product. Failure to do so might result in battery fluid leakage. If the contents of the battery get on your hands or in your eyes, it can cause blindness, chemical burns, and damage to the product. Do not dispose of this product in fire. Doing so may result in the battery bursting, causing a fire or injury. Do not expose this product to high temperatures, such as direct sunlight or a fire. Doing so may result in the battery bursting, causing a fire or injury. Do not subject this product to mechanical shock. It may result in damage caused by batteries, electric shock, or malfunction. If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns. Do not place this product in a place where the air pressure is extremely low. For details on charging the battery, be sure to read the battery manual and follow the instructions. Failure to do so may result in fire, overheating, explosion or malfunction. DMI-10 2/3 YH-WL500 Owners Manual 5

CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the product or other property. These precautions include, but are not limited to, the following:

Location

(Lithium ion) battery Charge only with a specified charger. Charging with an unspecified charger may cause leakage, overheating, explosion, or malfunction. Charge only within the specified charging temperature range. Charging at a temperature outside the range may cause leakage, overheating, explosion, or malfunction. Do not place the product in an unstable position or a location with excessive vibration, where it might accidentally fall over and cause injury. Connections Before connecting the product to other electronic components, turn off the power for all components. Also, before turning the power on or off for all components, set all volume levels to minimum. Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the product to set the desired listening level. Handling Do not rest your weight on, or place heavy objects on the product, and do not use excessive force on the buttons, switches or connectors. Keep small parts out of the reach of infants or small children who may accidentally swallow them. Do not use the product or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. If the headphones irritate your skin, stop use immediately. Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this may cause electric shocks. Before moving the product, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. 6 YH-WL500 Owners Manual DMI-10 3/3

Notices Information

Battery-related notes This product contains a lithium-ion battery. The lithium-ion battery contained in this product is a consumable item. To extend the life of the battery as long as possible, use caution regarding the following. If the product is not used for a long period of time, the charging time may get longer. When storing the product for a long time, charge the product around once every six months to avoid excessive discharge. When the battery fails to hold a charge or only has useful power for a very short time, the life of the bat-

tery is over. Lithium-ion batteries can be recycled. After usage, you may recycle the battery, but never attempt to remove it by yourself. Have the device inspected by qualified Yamaha service personnel. If there are no Yamaha service personnel in your area, dispose of it properly according to relevant environmental laws and disposal rules in your area. This product contains a battery that contains per-

chlorate material. Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Handling this product Depending on the condition of surrounding radio waves, the product may possibly malfunction. Always turn the power off when the product is not in

] (power key) switch is in use. Even when the [

standby status (power LED is off/ status is off), elec-

tricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure you unplug the power cord from the wall AC outlet.

Maintenance When cleaning the product, use a soft and dry (or slightly damp) cloth. Do not use paint thinners, sol-

vents, alcohol, cleaning fluids, or chemical-impreg-

nated wiping cloths. Yamaha cannot be held responsible for damage caused by improper use or modifi-

cations to the product.

About the contents of this document This document is an owners manual intended for the readers who will use this product. The illustrations and screens as shown in this docu-

ment are for instructional purposes only. Software may be revised and updated without prior notice.

Trademarks The Bluetooth word mark and logos are regis-

tered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. The company names and product names in this manual are the trademarks or registered trade-

marks of their respective companies. The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should note this serial number in the space provided below and retain this manual as a perma-

nent record of your purchase to aid identification in the event of theft or loss. Model No. Serial No.

(bottom_en_02) YH-WL500 Owners Manual 7

Table of Contents PRECAUTIONS .................................................................................. 4 Notices .............................................................................................................. 7 Information ....................................................................................................... 7 Product Overview ............................................................................. 9 Main Features ................................................................................................... 9 Packing Contents ............................................................................................. 9 Part Names ..................................................................................................... 10 Setting Up ....................................................................................... 11 Connecting the Transmitter to Other Devices by Cables ........................... 11 When connecting to a digital musical instrument or audio interface .................. 11 When connecting to a guitar amp ...................................................................... 11 Connecting the Power Adaptor .................................................................... 12 Charging the Headphones ............................................................................ 12 Basic Operations ............................................................................ 13 Using the Headphones .................................................................................. 13 Adjusting the Volume .................................................................................... 13 Checking the Audio Input Status .................................................................. 13 Checking Remaining Battery Power ............................................................ 14 After Using the Headphones ......................................................................... 14 Connecting by Cable ..................................................................................... 14 Advanced Features ......................................................................... 15 Using Simultaneously with Bluetooth Devices ........................................... 15 Registering a Bluetooth device .......................................................................... 15 Connecting to a Bluetooth device ...................................................................... 16 Disconnecting from a Bluetooth device .............................................................. 17 Using Additional Headphones ...................................................................... 17 Troubleshooting .............................................................................. 18 Appendix ......................................................................................... 20 Specifications ................................................................................................. 20 List of Operations .......................................................................................... 21 List of Audio Messages and LED Indicator ................................................. 21 Audio messages ................................................................................................ 21 LED displays ...................................................................................................... 22 8 YH-WL500 Owners Manual

Product Overview Main Features This product is a set of wireless headphones with a companion transmitter. The input jack of the transmitter can be connected to the headphone jack of a device (such as a digital keyboard, guitar amplifier, audio interface, etc.), enabling wireless connection of exceptionally low latency. Since this product can also be connected to a Bluetooth device, you can play your instrument simultane-

ously along with music playback from your Bluetooth device, such as a smartphone. Headphone jack Cable con-

nection YH-WL500 Transmitter Headphones Wireless connection*

Cable connection Bluetooth Headphone jack Guitar amplifier, multi-effect device Digital musical instrument, keyboard, mixer, audio interface, etc. Smart device/

Computer

* This is a dedicated connection using Yamahas original 2.4 GHz transmitter and achieves exceptionally low delay. A transmission channel is automatically set up simply by removing the headphones from the transmitter. Packing Contents Make sure that all of the following are enclosed with this product. Headphones Transmitter 3.5 mm stereo mini plug cable (2 m) Audio conversion plug

(stereo mini plug stand-

ard stereo phone plug) USB power adaptor Attachment plugs 6 USB cable

(50 cm/type A type C) Owners Manual

(this document)

* Select the plug that corre-

sponds to the shape of the AC outlet in your area. YH-WL500 Owners Manual 9

Product Overview Part Names Headphones w q q Headband w Housing e Power LED r Power key t Bluetooth key y + key u key i Cable input jack o Charging LED

!0 USB charging connector

!1 Connector A Connect to Connector B of the transmitter. i u y t r e Transmitter Rear o

!0

!1

!2

!4

!5

!6

!3

!2 Status LED

!3 Connector B

!4 Additional headphones key

!5 Input jack

!6 DC IN 10 YH-WL500 Owners Manual

Setting Up Connecting the Transmitter to Other Devices by Cables Before using the headphones, connect the headphone jack of your particular device (digital musi-

cal instrument, guitar amp, or audio interface, etc.) to the transmitters input jack (stereo mini jack), by using the stereo mini plug cable included with this product. When connecting to a digital musical instrument or audio interface When connecting to a guitar amp Transmitter Rear Transmitter Rear Input jack Stereo mini plug cable

(included) Headphone jack Input jack Headphone jack Guitar amplifier, multi-effect device Stereo mini plug cable

(included) Wireless connection Cable connection Digital musical instrument, keyboard, mixer, or audio interface Use the attached audio conversion plug depending on the headphone jack of your particular device. 3.5 mm stereo mini plug cable Audio conversion plug

(standard stereo phone plug stereo mini plug) Example showing wireless transmitter and corresponding amplifier, such as the Relay G10TII NOTE When using a commercial stereo mini plug cable for connection with the transmitter, make sure to use one having no (zero) resistance. YH-WL500 Owners Manual 11

Setting Up Connecting the Power Adaptor Charging the Headphones 1. Attach the attachment plug that corresponds to the shape of the AC outlet in your area to the USB power adaptor. Make sure to charge the headphones before using. USB power adaptor Attachment plug 1. Set the headphones on the transmitter. Make sure that connecter A of the headphones fits securely on connecter B of the transmitter. Slide the plug as indicated. For details, refer to the separate Attachment Plug Converter Table leaflet. 2. Connect the USB power adaptor in the order shown in the illustration. Transmitter AC outlet USB power adaptor Connecter A Connecter B Blue If the headphones are set correctly, the status LED of the transmitter flashes in blue, and then lights continuously in blue. When the status LED does not light up in blue, check whether connector B of the transmitter is cor-

rectly inserted in connector A of the headphones. 2. Make sure that the charging LED of the headphones is lit up in red. Type A Rear Type C USB cable WARNING Be sure to use the attached USB power adaptor only. When using the USB power adaptor with a removable plug, make sure to keep the plug attached to the USB power adaptor. Using the plug alone can cause elec-

tric shock or fire. Never touch the inner metallic section when attaching the attachment plug to avoid electric shock, short cir-

cuit, or damage. Also, be careful that no dust accu-

mulates between the USB power adaptor and plug. NOTE To disconnect the USB power adaptor, follow steps 2 q to e in reverse order. 12 YH-WL500 Owners Manual Red The charging LED lights up in red during charging, and turns off when charging is completed. The charging LED will not light up when the head-

phones are already fully charged. Setup is now completed. NOTE You may not be able to charge if you use a USB cable other than the one included with this product. You can also charge directly from the AC outlet by con-

necting the USB cable with a USB power adaptor instead of setting on the transmitter. During charging, no buttons can be used, and wireless connection is canceled.

Basic Operations Using the Headphones Adjusting the Volume 1. Turn on the power of your connected devices. Also in this step, lower the volume of those devices. 2. Remove the fully charged headphones from the transmitter. The status LED of the transmitter and the power LED of the headphones flash in blue and a wire-

less channel is set up automatically. If successfully connected, you will hear a Pairing Successful audio message, and then the power LED lights continuously in blue. Status LED Flashes in blue Power LED Flashes in blue Transmitter 3. Put the headphones on. Follow the steps below to adjust the volume.

+ key key Turning the volume up:

Press the + key. Turning the volume down:

Press the key. Turning the volume up continuously:

Hold down the + key. Turning the volume down continuously:

Hold down the key. NOTE When volume reaches the maximum, you will hear a beep sound. Checking the Audio Input Status Check the markings for the left and right sides to make sure the headphones are positioned cor-

rectly when you put them on. While using this product, you can check the status of the audio input from the status LED of the transmitter. R L Status LED Blue Red 4. Adjust the volume of your device as desired. When the audio input is too high, the status LED lights up in red. Lower the volume of the connected device. YH-WL500 Owners Manual 13

Basic Operations Checking Remaining Battery Power While you are using the headphones, you can check how much battery power is left from an audio message.

Audio message Connecting by Cable By connecting this product directly to a device by cable, you can use it conventionally without having to use the power supply. 1. Turn the power of this product off by holding down the power key. Battery Low: small amount of charge remaining 2. Lower the volume of your equipment. 3. Connect the headphone jack of your equip-

ment to the input jack of the headphones by using the 3.5 mm stereo mini-plug cable

(included). After Using the Headphones 1. When you are finished using the head-

phones, make sure to turn the power off by holding down the power key. Hold down 3.5 mm stereo mini-plug cable

(included) 2. Charge the headphones by setting them on as desired. the transmitter (p.12). 4. Adjust the volume of the connected device Use the attached audio conversion plug according to the shape of the headphone jack of your equipment. NOTE The following functions are not available when connecting via cable.

- Adjusting the volume by pressing the + key (or the key)

- Wireless connection When using this product with the cable connected, you cannot use it with the power turned on. Use the head-

phones after turning off the power by holding down the power key. 14 YH-WL500 Owners Manual

Advanced Features Using Simultaneously with Bluetooth Devices During wireless connection, you can also listen to music (for example, musical accompaniment) from a Bluetooth-compatible smart device or computer. Bluetooth connection Registering a Bluetooth device When first connecting this product to a Blue-

tooth device, follow the steps below to register this product with that device. 1. Set this product to registration standby mode. With the power turned on, hold down the Bluetooth key until the power LED flashes as shown in the illustration below. The headphones will enter regis-

tration standby mode. Wireless connection Rear Blue Red Flashes alternately Transmitter Input jack Headphone jack Cable connection 2 sec or more 2. Activate the Bluetooth function on the Blue-

tooth device. A list of Bluetooth devices that can be connected will be shown. 3. Select this product from this list on your Bluetooth device. Digital musical instrument, keyboard, mixer, or audio interface Start playback of the musical accompaniment from your smart device, after registering and connecting as a Bluetooth device (described at right). At that time, adjust the volume of the music from the smart device. NOTE The volume of the music from your smart device via Blue-

tooth connecting cannot be adjusted by pressing the +

key (or the key) of this product. If successfully connected, you will hear a Con-

nected audio message. YH-WL500 Owners Manual 15

Advanced Features NOTE Registration standby mode will automatically end after about thirty seconds. To register again, start from step 1. Up to 8 devices can be registered with this product. From the 9th device on, older registrations will be deleted (the oldest is deleted first). If a passkey is required when connecting, input 0000. Connecting to a Bluetooth device Connect this product to the Bluetooth device with which it has already been registered. When you press the Bluetooth key briefly, this product will search for all previously connected Bluetooth devices, sequentially from the latest reg-

istered one, and will connect it automatically. CAUTION Be sure to set the volume of the Bluetooth device to the minimum level and gradually raise the volume while playing the Bluetooth device to set the desired listening level. Failure to do so can damage your hearing. If this product does not automatically connect to a Bluetooth device, it is waiting for connection. Make connection from the Bluetooth device itself to prop-

erly connect with this product. When this product is not able to connect with the Bluetooth devices (a maximum of eight) connected in the past, the waiting for connection status is once reset. Briefly press the Bluetooth key again and redo connection from the beginning of these steps. If successfully connected, you will hear a Con-

nected audio message. NOTE This product connects to a single Bluetooth device, and cannot connect to multiple devices at the same time. When no wireless communications are made for ten minutes and Bluetooth is disconnected for one minute, the power of the headphones automatically turns off. In that case, press the power key again to turn on the power. The volume of the music from your smart device via Bluetooth connecting cannot be adjusted by pressing the + key (or the key) of this product. Adjust the vol-

ume of the music directly from the smart device. 16 YH-WL500 Owners Manual

Advanced Features Using Additional Headphones You can add two or more headphones to a sin-

gle transmitter, and they can simultaneously be used wirelessly. Disconnecting from a Bluetooth device Follow the steps below to disconnect a Blue-

tooth device.

Turn the Bluetooth devices power off. This product enters a waiting-for-connection status

(from a Bluetooth device).

Turn the power of this product off. Rear Transmitter 1. Press the additional headphones key of the transmitter. The status LED of the transmitter flashes in blue. Flashes in blue 2. Briefly press the power key on the head-

phones twice. The power LED of the headphones flashes in blue and this product starts pairing. The status LED will light up in blue when pairing is completed. NOTE Currently (as of December, 2022), headphones-only sales are not available. YH-WL500 Owners Manual 17

Troubleshooting Read this first

This product is not connected to a Bluetooth If this product does not operate normally while you are using it, first check the following.

Turn the power off and then on again.

Make sure that this product has been suffi-

ciently charged. Charging the Headphones (p.12)

Also, check the following. Power will not turn on (p.18) The product cannot be charged (p.18) No sound can be heard (p.18) The sound is distorted, noisy or choppy (p.18) Cannot connect the headphones and the transmit-

ter (p.19) Cannot connect to a Bluetooth device (p.19) The product does not operate or play back (p.19) Problem still not resolved (p.19) Power will not turn on

There may not be enough battery power left. Charge this product. Charging the Headphones (p.12) The product cannot be charged

Your computer is not turned on (when charging from your computer). Turn the power of your computer on, and then charge this product. device. Pair this product. Connecting to a Bluetooth device (p.16)

The volume is too low. Raise the volume. Adjusting the Volume (p.13)

The music stopped playing back. Start playback of the music from the connected Blue-

tooth device. Using Simultaneously with Bluetooth Devices (p.15)

The cable may not be correctly connected

(when using wireless connection). Connect the 3.5 mm stereo mini-plug cable jack of this product correctly to your external device. Connecting the Transmitter to Other Devices by Cables (p.11)

The cable containing resistance is being used. Use the included 3.5 mm stereo mini-plug cable when connecting this product to a device by cable. If you are using a commercial stereo mini-plug cable, make sure to use one that has no (zero) resistance.

The volume of the external device is low when using wireless connection. Raise the volume on your external device. Using Simultaneously with Bluetooth Devices (p.15)

The volume of the external device is low when connecting to a Bluetooth device. Raise the volume on your external device. Using Simultaneously with Bluetooth Devices (p.15)

* Charging from a PC is not guaranteed.

The volume of the external device is low when

You may have been using a USB cable other than the one included with this product. Use the included USB cable to make sure the product correctly charges.

Some foreign substance may have accumu-

lated between connectors A and B. Check the connectors and make sure that no foreign substance has accumulated there. No sound can be heard

The headphones are not connected to the transmitter. Pair this product once again. Set the headphones on the transmitter once, and remove them after the status LED changes from flashing in blue to continuously lit in blue (pp. 1213). Otherwise, press the additional head-

phones key of the transmitter, and then briefly press the power key of headphones twice (p.17). 18 YH-WL500 Owners Manual using a 3.5 mm stereo mini-plug cable. Raise the volume on your external device. Connecting by Cable (p.14) The sound is distorted, noisy or choppy

The signal of wireless connection may not be coming in clearly, making the connection unstable. Pair this product once again. Set the headphones on the transmitter once, and remove them after the status LED changes from flashing in blue to continuously lit in blue (pp. 1213).

The signal of Bluetooth connection may not be coming in clearly, making the connection unstable. Move away from wireless devices such as access points, or appliances that product electromagnetic waves such as microwave ovens.

Try placing the connected Bluetooth device as close to this product as you can. Devices with wireless network connectivity may trans-

mit signals that obstruct Bluetooth communications. In this case, turn off the wireless network connectivity fea-

ture on your Bluetooth device. The product does not operate or play back

This product may be charging. You cannot use this product while it is charging. Use the headphones after charging is finished.

There is no remaining battery power on this product. Charge this product. Charging the Headphones (p.12)

The product is temporarily not functioning. Turn the power off and then on again. When it becomes impossible to turn the power off by normal operation, hold down the power key for about six seconds or more in order to perform a hardware reset. When the power LED turns off, the reset operation is complete.

The 3.5 mm stereo mini-plug cable may be con-

nected. No button operations are possible while using this prod-

uct with cable connection. Remove the 3.5 mm stereo mini-plug cable from the headphones. Cannot connect the headphones and the transmitter

The headphones and the transmitter may be too far apart. Move the headphones closer to the transmitter. Troubleshooting Cannot connect to a Bluetooth device

This product and your Bluetooth device may be too far apart. Move this product closer to the Bluetooth device.

A device that emits electromagnetic waves

(such as a microwave oven, access point and so on) might be nearby. Do not use this product near other devices that emit electromagnetic waves.

The connection information for the registered Bluetooth device may not be working properly. Delete the connection information of this product from the Bluetooth device, and then pair this product with the device. Registering a Bluetooth device (p.15)

The registration information for the Bluetooth device that was registered on this product may have been deleted. Pair this product once more. Registering a Bluetooth device (p.15)

This product may already be connected to another Bluetooth device. Disconnect that Bluetooth device, and then connect this product with the new device. Disconnecting from a Bluetooth device (p.17) Problem still not resolved If the trouble still cannot be solved, please contact Yamaha for product support as shown below.

A device that emits electromagnetic waves

For customers within Japan

(such as a microwave oven, access point and so on) might be nearby. Do not use this product near other devices that emit electromagnetic waves. Please contact the store where you purchased this product, or the Product Support Center as listed in the included warranty sheet.

For customers outside of Japan

The signal of wireless connection may not be coming in clearly Please contact your nearest authorized Yamaha dealer or service center. Pair this product once again. Set the headphones on the transmitter once, and remove them after the status LED changes from flashing in blue to continuously lit in blue (pp. 1213). Otherwise, press the additional head-

phones key of the transmitter, and then briefly press the power key of headphones twice (p.17). YH-WL500 Owners Manual 19

Appendix Specifications Headphones Driver type: Dynamic, open air / over-ear Driver unit: 40 mm Impedance: 32 Wired input jack: 3.5 stereo mini-jack USB charging connector: USB Type-C (USB 1.1) Weight: 315 g

Bluetooth Radio frequency: 2402 MHz to 2480 MHz Maximum output power (EIRP): 6.46 dBm Bluetooth version: 4.2 Supported profiles: A2DP, AVRCP Supported codecs: SBC Maximum number of pairable devices: 8 SAR observed value: 0.15 w/kg Transmitter Input jack: 3.5 stereo mini-jack DC IN: USB Type-C (USB 1.1) Weight: 400 g Maximum power Consumption:

2.55W (5.1 VDC 500mA)

Wireless communication functions Digital format: Original format (equivalent to 24-bit) Radio frequency (operational frequency):

2402 MHz to 2478 MHz Maximum output power (EIRP): 2.43 dBm Maximum communication range: 7 m in optimum conditions, though this may differ depending on the condition of surrounding radio waves. Power supply

Rechargeable battery Internal rechargeable battery: Lithium-ion battery Charging time (to full capacity):

Approximately 3 hours Charging temperature: +5 to +40 C Operating Temperature: 0 to +40 C Battery run time (continuous playback time):

Approximately 9 hours

USB power adaptor Model number: UNXBU3012-050020SA Input: 100 VAC to 240 VAC Output: 5.1 VDC/2A (USB-A)

* The contents of this manual apply to the latest specifications as of the printing date. To obtain the latest manual, access the Yamaha website, and then download the manual file. Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used elec-

trical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable col-

lection points, in accordance with your national legislation. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

(58-M02 WEEE en 01) 20 YH-WL500 Owners Manual

Appendix List of Operations The main operations of this product are as shown below. List of Audio Messages and LED Indicator Bluetooth key Audio messages

+ key key Power key The audio messages on this product are shown below. Power Off Power Power off Battery Battery Low Battery Low Wireless communication Pairing Successful Pairing Successful Pairing Failed Connected Disconnected Finished connecting Pairing unsuccessful Bluetooth Finished connecting to Blue-

tooth device Finished connecting again Disconnected from Bluetooth device Disconnected by the condition of surrounding radio waves Power on Power off Volume up Volume down Volume up continuously Volume down continuously Power Power key Power key

(hold down for one second) Volume

+ key key

+ key (hold down) key (hold down) Wireless communication Start pairing Power key (twice) Bluetooth Start registration Bluetooth key (hold down) Start connecting Bluetooth key YH-WL500 Owners Manual 21

Appendix LED displays The LED displays on this product are shown below. Headphones Transmitter Power LED Charging LED Status LED Blue Red

Power LED

Status LED Power on Lights up (blue) Power on Lights up (blue) Power Power Power off Lights off Wireless communication With no abnor-

malities Lights up (blue) Communication error Flashes for one minute (red) Searching for paired Blue-

tooth device Standby mode for pairing with Bluetooth device Flashes (blue) for less than about 10 sec-

onds Bluetooth Flashes

(between red and blue alter-

nately) Updating Farmware update Flashes

(between red and blue alter-

nately) Blue Blue Red Blue Blue Red Blue Red

Charging LED Under charge Lights up (red) Battery Finished charg-

ing Lights off Red 22 YH-WL500 Owners Manual Power off Not lit An audio input is too large Audio input Lights up (red) Wireless communication Blue Red With no abnor-

malities Lights up (blue) Flashes (blue)

Lights up

(blue) Flashes for 20 seconds (blue) Flashes for two minutes (blue) Searching for RSSI frequency

(when setting the headphones to transmitter) Searching for radio channels

(when removing the headphones from transmitter) Standby mode for pairing with the headphones

(when holding down the addi-

tional key) Blue Blue Blue Blue Blue Updating Farmware update Flashes

(between red and blue alter-

nately) Blue Red

MEMO YH-WL500 Owners Manual 23

@ YAMAHA MODEL:YH-WL500 Wireless Headphones UK C {0} Qn.) K By |S H xv-vv00%

CAN ICES-3(8)/NMB-3(B) Shenzhen Grandsun Electronic Co.,Ltd. FCC ID: 2AN4C=6S7163, EAST PARK, GAOGIAO INDUSTRY ZONE, IC : 10276A-GS7163 PINGDI STREET, LONGGANG DISTRICT, HVIN : YH-WL500 T SHENZHEN, GUANGDONG, China 518117 Rating : 5.1VDC,0,5A MAX INPUT PF SRT EMR ROARAA Lithium-ion battery : 3.7VDC,750mAH,2.77Wh iii: HEROARRSt oat AC adaptor : UNXBU3012-050020SA Made for Yamaha Corporation Made in China / 453i YAMAHA CORPORATION 10-1 Nakazawa-cho, Naka-ku, SER.NO. [ Hamamatsu, Shizuoka 430-8650, Japan 60.2 20S

Shenzhen Grandsun Electronic Co., Ltd. Date: 10/26/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 From: Beyerdynamic Regarding:

Confidentiality Request regarding application for FCC ID: 2AN4C-GS7163 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITYRemark045,90180Additionally, the applicant requests the following documents be held confidential until the device is marketed or 90 days from the grant date, whichever is less. If the device is marketed within 90 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) FCCTCB Print Name: Molly Wei Title: Certification Engineer Signature:

On behalf of Company: Shenzhen Grandsun Electronic Co., Ltd. Telephone: 86-755-89308156 E-mail: yanyun.wei@grandsun.com

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Shenzhen Grandsun Electronic Co., Ltd. Address Grantee Code FCC ID East Park,Gaoqiao Industry Zone,Pingdi Street, Longgang, Shenzhen, China 2AN4C 2AN4C-GS7163 Authorized Contact Name Molly Wei Contact Email Contact Phone yanyun.wei@grandsun.com 86-755-89308156 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2022-10-28 Print Name:

Molly Wei Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Certification Engineer Applicant Declaration Rev:0.0

Shenzhen Grandsun Electronic Co., Ltd. Date: 10/26/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AN4C-GS7163 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Shenzhen Grandsun Electronic Co., Ltd. This authorization is valid until further written notice from the applicant. Print Name: Molly Wei Title: Certification Engineer Signature:

On behalf of Company: Shenzhen Grandsun Electronic Co., Ltd. Telephone: 86-755-89308156 E-mail: yanyun.wei@grandsun.com