SP3509_Manual double sided printing FUNCTION PANELS BluetoothONNECTIONo CHARGING @) Power Switch Turn on/oft
(0
[>II l<J<J [>[>I Play/Pause Start and stop music Volume Down/Up Track Previous/Next Power the speaker on. The speaker will automatically powered on. enter pairing mode when 2. From your device's Bluetooth menu, select "RS_SP3509" speaker 3. When paired successfully, the device will make a tone to confirm the connection has been made Answer/Hangup Start and stop calls each use 4. Remember to turn the speaker off after Using a Micro-USS cable (included), insert the jack into the port on back of unit and then plug the USB connecter into USB port on the power source. 2. Charge the device until the red LED turns off. indicator 3. Always disconnect charging is finished the cable when TROUBLE SHOOTING No power Recharge your speaker using the micro-USB cable. If the problem persists, try using another micro-USB cable No response from the unit Ensure your Bluetooth A2DP, AVRCP, or HFP profile device supports an Check if both devices are paired and connected to each other. Restart the device and try to reconnect. Box lnclues Bluetooth Speake, Mlc,o USB Cha,glng Po,t will reconnect Note: The speaker device has been paired previously. type and configuration, device's may be required each time automatically Depending if your on your manual reconnection FCC Disclaimer:
This device subject Complies to the following two condons with Part 15 of the FCC Rules. Operation is 1-This device may not cause harmful interference, and and on, the user Is encouraged one or more of the following
- Reorient
- Increase or relocate the separation measuresc the receiving between antenna the equipment and to try to correct the Interference by by Industry to other users, the transmitter interference should be so chosen that the equivalent power (e.i.r.p.) for successful Canada. the antenna communication To reduce potential radio type and its gain radiated isotropically is not more than that necessary 2-This device must accept any interference received,
-Connect the equipment Into an outlet on a circuit different Electronic and electrical devices disposal Model No: SP3509 contact Fo, mo,e lnfo,matlon, the ,etalle, In cha,ge of waste management autho,ltles o, the local SPECIFICATIONS REALSIMPLE that may cause undesired from that to which the receive isconnected is not responsible for any caused by unauthorized
-Consult the dealer for help or assistance or on experienced radio/TV technician that electrical device and electconic is to be Working Distance:
Approx. 33 ft Interference The manufacturer including operation. radio or TV interference modcations void the user authodty to this equipment. to opecate Such modifications could the equipment and found to comply with the to Part 15 of the FCC pursuant reasonable to provide installation. radio frequency with the and used In accordance in a residential protection This uses, and can radiate generates, has been tested device, are designed interference for a Class 8 digital These limits harmful This equipment limits Rules. against equipment energy and, if not Installed may cause harmful instructions, communications. However, interference equipment reception, does cause harmful which can be determined interference by turning the equipment off to radio or television to radio interference that there is no guarantee will not occur in a particular installation. If this ms symbol indicates sepa,ately collected This product appropriate household waste complies This device Canada license-exempt following two conditions, with Part 15 of the FCC Rules and lodustry RSS standard(s). Operation to the is subject 1-This device may not cause harmful interference, and Is designated collection for separate of as point Do not dispose collection at an Charge Time: 2.5 Hours Playback Time: Approx. 1.5 Hours including 2-This device must accept any interference received, that may cause undesired The operation. is not responsible
, nterference manufacturer
, nte,ference equipment. authority
, egulations. antenna foe any radio or TV caused by unautho,ized Such modifications the equipment. this radio transmitte, of a type and maximum (o, lesser) could void the user's may only operate Under Industry to operate Canada using an gain approved for modificatioos to this If the device use batteries, they must be removed device and disposed In a appropriate from the center collection to do It do not attempt If the batteries cannot be removed, yourself
, Separate since it must be done by a qualified and recycling collection negative and prevent helps conserve consequence professional natural for human health resources and the environment that might result from Incorrect dlsposal Speaker Output Power: 3 W Speaker Impedance:
4 (l Battery:
300 mAh Lithium (rechargeable) SPLASH-PROOF WIRELESS SPEAKER IMPORTANT:
PLEASE READ BEFORE USING THIS PRODUCT FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.