all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 2.42 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Attestation Statements | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manual | Users Manual | 2.42 MiB |
MOZA AirCross User Manual www.gudsen.com MOZA AirCross User Manual www.gudsen.com FAQ & Customer Support 1.How to setup Moza AirCross? Take out the Moza AirCross and battery from the boxmake sure the battery is full chargeBalance the camera until the camera lens can keep horizontal still whatever it is towards up or down, left or right, then you can turn it on and give it a try. 2.What cause a vibration problem? The payload profile is not match to the real weight of your setup will cause the vibration problem. You can try the Auto-Tune at the Mobile App to fix this problem. 3.Quick review of Joystick and Power Button control JoystickOne quick press: Yaw-follow mode. Double quick press: Tilt-yaw follow mode. Triple quick press: All-lock mode. Four times quick press: Roll-follow mode. Long press/quick press again: Enable sleeping mode/ wake up Power ButtonOne quick press: Start/Stop recording. Double quick press: Photo-taking. Triple quick press: auto-center. Four times press: Enable roll control. Long press: Power on/off the Moza AirCross. 4.How to set the camera recording function on Moza AirCross? 1Plug in the camera control cable. 2Select the right camera profile and save it.Sony--ALPHACanon--EOS DSLRPanasonic--GH 3Click on the Power Button on Moza or wireless thumb controller to start. 5.How to connect to the Mobile App? Download (iOS: Search MOZA at App store; Android: Search MOZA at Google Play)Turn on the phone BluetoothAndroid need to give the phone full access,run the App and power on the Moza AirCross, Click on the Search button to locate your Moza device. Customer Support Please send your inquiry to www.gudsen.com for the technical assistant. Index Moza AirCross User Indexes 37 38 1. Gimbal Balance 07 2. Dual hand setup 09 3. Press commend Logic 10 4. Thumb controller function 27 5. Parameter setting & Auto-Tune 5.1APP Select profile 21-22 5.2 Thumb controller30 6. Camera Control Feature 6.1 Camera control cable09 6.2APP20 6.3 Thumb controlle30 7. Roll Motor Control 7.1Joystick control10 7.2APP control20 7.3Thumb controller control32 8. Follow Mode selection 8.1Jostick10 8.2APP21 8.3Thumb controlle26 9. Manual position Switch 9.1APP22 9.2Thumb controller31 10. Advanced Time-Lpase24 11. Motion Control33 12. Gimbal Firmware update11 13. Thumb controller Firmware update16 14. Calibration13 Thank you for choosing Gudsen. The Moza AirCross is a professional handheld gimbal designed to create and capture cinematic camera movement. The Moza AirCross can support all mirrorless cameras. The Moza AirCross features advanced motor control technology, high-quality materials, and industry leading software. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product. You agree to use this product only for purpose that are proper and in accordance with all terms, precautions, practices, policies, and guidelines Gudsen has made and may make available. Gudsen reserves the right of final explanation for this document and all relevant documents relating to Moza AirCross, and the right to make changes at any time without notice. Instruction Contents 1. Instruction 2.Package List 01 3.Getting to know about Moza AirCross 04 4.Getting Start 05 5.Gimbal Control 10 6. Firmware update 11 7. App Installation 18 8. Mobile App Instruction 19 9. Wireless Thumb Controller 26 10. Mimic Motion Control 33 11. Specifications 35 12. Warranty 36 13. FAQ& Customer Support 37 14.Index38 Thank you for choosing Gudsen. The Moza AirCross is a professional handheld gimbal designed to create and capture cinematic camera movement. The Moza AirCross can support all mirrorless cameras. The Moza AirCross features advanced motor control technology, high-quality materials, and industry leading software. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product. You agree to use this product only for purpose that are proper and in accordance with all terms, precautions, practices, policies, and guidelines Gudsen has made and may make available. Gudsen reserves the right of final explanation for this document and all relevant documents relating to Moza AirCross, and the right to make changes at any time without notice. Instruction Contents 1. Instruction 2.Package List 01 3.Getting to know about Moza AirCross 04 4.Getting Start 05 5.Gimbal Control 10 6. Firmware update 11 7. App Installation 18 8. Mobile App Instruction 19 9. Wireless Thumb Controller 26 10. Mimic Motion Control 33 11. Specifications 35 12. Warranty 36 13. FAQ& Customer Support 37 14.Index38 FAQ & Customer Support 1.How to setup Moza AirCross? Take out the Moza AirCross and battery from the boxmake sure the battery is full chargeBalance the camera until the camera lens can keep horizontal still whatever it is towards up or down, left or right, then you can turn it on and give it a try. 2.What cause a vibration problem? The payload profile is not match to the real weight of your setup will cause the vibration problem. You can try the Auto-Tune at the Mobile App to fix this problem. 3.Quick review of Joystick and Power Button control JoystickOne quick press: Yaw-follow mode. Double quick press: Tilt-yaw follow mode. Triple quick press: All-lock mode. Four times quick press: Roll-follow mode. Long press/quick press again: Enable sleeping mode/ wake up Power ButtonOne quick press: Start/Stop recording. Double quick press: Photo-taking. Triple quick press: auto-center. Four times press: Enable roll control. Long press: Power on/off the Moza AirCross. 4.How to set the camera recording function on Moza AirCross? 1Plug in the camera control cable. 2Select the right camera profile and save it.Sony--ALPHACanon--EOS DSLRPanasonic--GH 3Click on the Power Button on Moza or wireless thumb controller to start. 5.How to connect to the Mobile App? Download (iOS: Search MOZA at App store; Android: Search MOZA at Google Play)Turn on the phone BluetoothAndroid need to give the phone full access,run the App and power on the Moza AirCross, Click on the Search button to locate your Moza device. Customer Support Please send your inquiry to www.gudsen.com for the technical assistant. Index Moza AirCross User Indexes 37 38 1. Gimbal Balance 07 2. Dual hand setup 09 3. Press commend Logic 10 4. Thumb controller function 27 5. Parameter setting & Auto-Tune 5.1APP Select profile 21-22 5.2 Thumb controller30 6. Camera Control Feature 6.1 Camera control cable09 6.2APP20 6.3 Thumb controlle30 7. Roll Motor Control 7.1Joystick control10 7.2APP control20 7.3Thumb controller control32 8. Follow Mode selection 8.1Jostick10 8.2APP21 8.3Thumb controlle26 9. Manual position Switch 9.1APP22 9.2Thumb controller31 10. Advanced Time-Lpase24 11. Motion Control33 12. Gimbal Firmware update11 13. Thumb controller Firmware update16 14. Calibration13 Specifications Warranty 1. Questions, Support, Service and Warranty contact support@gudsen.com. 2. All shipment must be approved by the Technical Support before shipment. Consumers are responsible for shipping costs. Technical Support will examine and identify the problem and responsibility; If the issue or issues are a manufacturing defect Gudsen will cover all testing costs, material costs, labor costs, and return shipping. 3. If the product is deemed not to be covered by the warranty. We will contact the customer describing the repairs and costs before repairing the stabilizer. Customer is responsible for return shipping; 4. Consumers can contact support@gudsen.com for more details of maintenance process. 5. Moza AirCross is covered by 12 months warranty. The limited warranty does not apply to accessories or consumable parts. For more details on the warranty policy www.gudsen.com. Moza AirCross Weight 896g(without battery) Dimensions 378*175*193mm Max Payload 1800g Till Rotation Range 360 Roll Rotation Range 360 Yaw Rotation Range 360 Working Voltage 9.8-12.6V Dynamic Current 200mA Static Current 100mA Battery Life 12hrs Bluetooth Bluetooth 4.0 Valid range 5m USB Input Micro USB 2.0 DC Input 12V DC Output 7.4V Battery Type Li-ion Capacity 2000mAh Output Voltage 4.2V(max) Output Current 6A (max) Charger Input Voltage 110~220V AC Output Voltage 4.2V Output Current 500mA X4 Charging Time 4hrs Wireless Thumb Controller Weight 100g Battery Capacity 600mAh Battery Voltage 3.7V Working Current 50mA Rest Current 10mA Standby Time 24h Wireless Type 2.4G Control Range 50M Charging Voltage 5V Charging Time 2h Moza AirCross User Warranty 35 36 Gimbal X 1 Handgrip X 1 Moza Modified Batteries X 3 Charger X 1 Tripod X 1 Wireless thumb controllerOptional X 1 Lens support X 1 Lens Support Screw X 1 Handle Bar X 1 Side Handle X 2 Package list Moza AirCross Gimbal. Main handle of the Moza AirCross, battery holder. Moza modified batteries. Moza modified battery charger. The base of Moza AirCross gimbal. Wireless thumb controller. Holder of camera lens. To secure the camera lens holder. Dual-hand grip accessories. Dual-hand grip accessories. Moza AirCross User Package list 01 02 GimbalX 1Handgrip X 1 Moza Modified Batteries X 3Charger X 1Tripod X 1 Wireless thumb controllerOptional X 1 Lens support X 1 Lens Support Screw X 1 Handle BarOptional X 1 Side HandleOptional X 2 Package listMoza AirCross Gimbal.Main handle of the Moza AirCross, battery holder. Moza modified batteries. Moza modified battery charger. The base of Moza AirCross gimbal.Wireless thumb controller. Holder of camera lens. To secure the camera lens holder. Dual-hand grip accessories. Dual-hand grip accessories. Moza AirCross User Package list 01 02 Specifications Warranty1. Questions, Support, Service and Warranty contact support@gudsen.com. 2. All shipment must be approved by the Technical Support before shipment. Consumers are responsible for shipping costs. Technical Support will examine and identify the problem and responsibility; If the issue orissuesare a manufacturing defect Gudsen will cover all testing costs, material costs, labor costs, and return shipping. 3. If theproduct is deemed nottobe covered bythe warranty. We will contact thecustomer describing the repairs and costs beforerepairing the stabilizer. Customer is responsible for return shipping; 4. Consumers can contact support@gudsen.com formoredetailsof maintenance process. 5. Moza AirCross is covered by12 monthswarranty. Thelimited warranty does not apply toaccessories or consumable parts. For moredetailson the warranty policy www.gudsen.com. Moza AirCross Weight 896g(without battery) Dimensions 378*175*193mm Max Payload 1800g Till Rotation Range 360 Roll Rotation Range 360 Yaw Rotation Range 360 Working Voltage 9.8-12.6V Dynamic Current 200mA Static Current 100mA Battery Life 12hrs Bluetooth Bluetooth 4.0 Valid range 5m USB Input Micro USB 2.0 DC Input 12V DC Output 7.4V Battery Type Li-ion Capacity 2000mAh Output Voltage 4.2V(max) Output Current 6A (max) Charger Input Voltage 5V DC Output Voltage 4.2V DC Output Current 500mA X 4 Charging Time 4hrs Wireless Thumb Controller Weight 100g Battery Capacity 600mAh Battery Voltage 3.7V Working Current 50mA Rest Current 10mA Standby Time 24h Wireless Type 2.4G Control Range 50M Charging Voltage 5V Charging Time 2h Moza AirCross User Warranty35 36 Mimic Motion Control Mimic control calibration MOZA Mimic Motion Control Tutorial Guide NoticeOnly apply to version D of the MOZA thumb controller 1. Pair Moza AirCross with the thumb controller (which has been paired after manufacture). 2. Turn Moza AirCross on. 3. Calibration should be done when you use this function for the first time or drifts and unstable situations occur, please refer to mimic control calibration. 4. Long press OPTIONS to enter the menu. Select Motion Control>> Start to enter the mimic control mode. 5. The screen displays parameters of each axis after entering the mimic control mode. If Error pops out on the screen, please check the thumb controller code or try it again. 6. If the attitude of Moza AirCross is inconsistent with the thumb controller in mimic control mode, long press SPEED button to pause mimic control, turn the thumb controller to a desired position, then release SPEED to restart control when both attitudes become consistent. 7. Move the joystick leftwards to exit the mimic control mode. SelectONto enable the motion control on the current Adjustment Arm . SelectOFFto disable this function. 1. Place the thumb controller and Moza AirCross well like figure 1 2. Long press OPTIONS to enter the menu. Select Motion Control >> Motion Calib to start calibration. 3. Keep the thumb controller still, until the screen displays Success or Fail. If it shows Fail please make sure wireless thumb controller is keeping still or if it is a D version controller. Moza AirCross User Mimic Motion Control 33 34 Control cable X 2 USB cable X 1 Tool Bag X 1 User Manual X 1 Anker convertor X 1 Panasonic Control Cable Sony Control Cable For firmware update or modification of parameters. Carrier of the accessories Instruction Anker convertor Getting to know about Moza AirCross Moza AirCross User Getting to know about Moza 03 04 Control cable X 2 USB cable X 1 Tool Bag X 1 User Manual X 1 Anker convertor X 1 Panasonic Control Cable Sony Control Cable For firmware update or modification of parameters. Carrier of the accessories Instruction Anker convertor Getting to know about Moza AirCross Moza AirCross User Getting to know about Moza 03 04 Mimic Motion Control Mimic control calibration MOZA Mimic Motion Control Tutorial Guide NoticeOnly apply to version D of the MOZA thumb controller 1. Pair Moza AirCross with the thumb controller (which has been paired after manufacture). 2. Turn Moza AirCross on. 3. Calibration should be done when you use this function for the first time or drifts and unstable situations occur, please refer to mimic control calibration. 4. Long press OPTIONS to enter the menu. Select Motion Control>> Start to enter the mimic control mode. 5. The screen displays parameters of each axis after entering the mimic control mode. If Error pops out on the screen, please check the thumb controller code or try it again. 6. If the attitude of Moza AirCross is inconsistent with the thumb controller in mimic control mode, long press SPEED button to pause mimic control, turn the thumb controller to a desired position, then release SPEED to restart control when both attitudes become consistent. 7. Move the joystick leftwards to exit the mimic control mode. SelectONto enable the motion control on the current Adjustment Arm . SelectOFFto disable this function. 1. Place the thumb controller and Moza AirCross well like figure 1 2. Long press OPTIONS to enter the menu. Select Motion Control >> Motion Calib to start calibration. 3. Keep the thumb controller still, until the screen displays Success or Fail. If it shows Fail please make sure wireless thumb controller is keeping still or if it is a D version controller. Moza AirCross User Mimic Motion Control 33 34 Follow Speed is set for the movement speed along with the operator. Five level profiles are available. Power Motor torque adjustment, please keep the original parameter. Calibrate Gyroscope and Accelerometer Calibration. More information please refer to page 13 or page 23. Motion Control Please refer to page 33 to learn how to set the Motion Control Manual Position Enable the Manual Position then use your hand to move the lens towards to the angles you need, then let go and it will stay on the current position. TipsDisable the follow mode on the current Adjustment Arm before enable the Manual Position. Habits Set the habits for joystick and display. Mode You can set the joystick to 4 direction or 8 direction. Remap the joystick Up Down PIT: Up or down to control the Pitch Adjustment Arm Up Down ROL: Up or down to control the Roll Adjustment Arm Up Down YAW: Up or down to control the Yaw Adjustment Arm Left Right PIT: Left or Right to control the Pitch Adjustment Arm Left Right ROL: Left or Right to control the Roll Adjustment Arm Left Right YAW: Left or Right to control the Yaw Adjustment Arm Reverse Reverse the current joystick direction. Custom Customize turn off the display after 1-60 minutes. Always On Display will always on. Version View the current firmware version of the wireless thumb controller. Moza AirCross User Wireless Thumb Controller 31 32 Battery Installation Battery Safety Guidelines Power Connection Installation Getting Started Please charge the batteries with the MOZA charger before using the Moza AirCross. WARNING To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries. Battery Use 1.Do not let the batteries to come into contact with any kind of liquid. DO NOT leave batteries out in the rain or near a source of moisture. DO NOT drop the battery into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion. 2.If the battery falls in to water by accident, put it in a safe and open area immediately. Maintain a safe distance from the battery until it is completely dry. Never use the battery again, and dispose of the battery properly as described in the Battery Disposal section below. 3.Do not extinguish any battery fire using water, sand, fire blanket or a dry powder fire extinguisher. 4.Never use non-MOZA modified batteries. If replacement or backup is needed, please purchase new batteries from http://www.gudsen.com. 5.Never use or charge swollen, leaky, or damaged batteries. If your batteries are abnormal, contact Gudsen technical support or Gudsen authorized vendor for further assistance. 6.The battery should be used in temperatures from 0-40. Use of the battery in environments above 40 can lead to a fire or explosion. Use of battery below 0 can lead to permanent damage. 7.DO NOT use the battery in strong electrostatic environments. Otherwise, the battery control board may malfunction. 8.Never disassemble or pierce the battery in any way or the battery may leak, catch fire, or explode. 9.DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or charger. 10.Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with fresh running water for at least 15 minutes, and then go to a doctor immediately. 11.DO NOT use the battery if it received impact from a fall or other accidents. 12.DO NOT heat batteries. DO NOT put batteries in a microwave oven or in a pressurized container. 13.DO NOT place lose battery cells on any conductive surface, such as a metal table. 14.DO NOT manually short-circuit the battery. 15.Clean battery terminals with a clean, dry cloth. Battery Charging 1.DO NOT attach the batteries to wall outlets or car charger sockets directly, always use a MOZA official charger. Gudsen takes no responsibility if the battery is charged using a non-MOZA official charger, 2.Never leave the battery unattended during charging. DO NOT charge the battery near flammable materials or on flammable surfaces such as carpet or wood. 3.DO NOT charge the battery immediately after use, because the battery temperature may be too high. Wait to charge the battery until it cools down to near room temperature. Charging the battery outside of the temperature range of 0-40 may lead to leakage, overheating, or battery damage. 4.Disconnect the charger when not in use. Examine the charger regularly for damage to the cord, plug, enclosure, or other parts. DO NOT clean the charger with denatured alcohol or other flammable solvents. Never use a damaged charger. Battery Storage 1.Keep batteries out of the reach of children and pets. 2.DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave the batteries inside of a vehicle on hot days. 3.Always keep the battery in a dry place. 4.DO NOT store the battery fully discharged for long periods of time, otherwise it will over discharge and lead to permanent damage. Battery Maintenance 1.Never use the battery when the temperature is too high or too low. 2.Never store the battery in environments with a temperature higher than 60. Battery Disposal Dispose of the battery in specific recycling boxes only after a complete discharge. DO NOT place the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries Panasonic Power Connection(Optional) Sony Power Connection(Optional) 1.Turn off the camera and take out the camera battery. 2.Put Sony/Panasonic Power Connection into the camera battery compartments. 3.Pull out the DC cable from the Power Connection and plug it in the DC output on the Moza AirCross. Moza AirCross User Battery Safety Guidelines 05 06 Battery Installation Battery Safety Guidelines Power Connection Installation Getting Started Please charge the batteries with the MOZA charger before using the Moza AirCross. WARNING To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries. Battery Use 1.Do not let the batteries to come into contact with any kind of liquid. DO NOT leave batteries out in the rain or near a source of moisture. DO NOT drop the battery into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion. 2.If the battery falls in to water by accident, put it in a safe and open area immediately. Maintain a safe distance from the battery until it is completely dry. Never use the battery again, and dispose of the battery properly as described in the Battery Disposal section below. 3.Do not extinguish any battery fire using water, sand, fire blanket or a dry powder fire extinguisher. 4.Never use non-MOZA modified batteries. If replacement or backup is needed, please purchase new batteries from http://www.gudsen.com. 5.Never use or charge swollen, leaky, or damaged batteries. If your batteries are abnormal, contact Gudsen technical support or Gudsen authorized vendor for further assistance. 6.The battery should be used in temperatures from 0-40. Use of the battery in environments above 40 can lead to a fire or explosion. Use of battery below 0 can lead to permanent damage. 7.DO NOT use the battery in strong electrostatic environments. Otherwise, the battery control board may malfunction. 8.Never disassemble or pierce the battery in any way or the battery may leak, catch fire, or explode. 9.DO NOT drop or strike batteries. DO NOT place heavy objects on the batteries or charger. 10.Electrolytes in the battery are highly corrosive. If any electrolytes make contact with your skin or eyes, immediately wash the affected area with fresh running water for at least 15 minutes, and then go to a doctor immediately. 11.DO NOT use the battery if it received impact from a fall or other accidents. 12.DO NOT heat batteries. DO NOT put batteries in a microwave oven or in a pressurized container. 13.DO NOT place lose battery cells on any conductive surface, such as a metal table. 14.DO NOT manually short-circuit the battery. 15.Clean battery terminals with a clean, dry cloth. Battery Charging 1.DO NOT attach the batteries to wall outlets or car charger sockets directly, always use a MOZA official charger. Gudsen takes no responsibility if the battery is charged using a non-MOZA official charger, 2.Never leave the battery unattended during charging. DO NOT charge the battery near flammable materials or on flammable surfaces such as carpet or wood. 3.DO NOT charge the battery immediately after use, because the battery temperature may be too high. Wait to charge the battery until it cools down to near room temperature. Charging the battery outside of the temperature range of 0-40 may lead to leakage, overheating, or battery damage. 4.Disconnect the charger when not in use. Examine the charger regularly for damage to the cord, plug, enclosure, or other parts. DO NOT clean the charger with denatured alcohol or other flammable solvents. Never use a damaged charger. Battery Storage 1.Keep batteries out of the reach of children and pets. 2.DO NOT leave the battery near heat sources such as a furnace or heater. DO NOT leave the batteries inside of a vehicle on hot days. 3.Always keep the battery in a dry place. 4.DO NOT store the battery fully discharged for long periods of time, otherwise it will over discharge and lead to permanent damage. Battery Maintenance 1.Never use the battery when the temperature is too high or too low. 2.Never store the battery in environments with a temperature higher than 60. Battery Disposal Dispose of the battery in specific recycling boxes only after a complete discharge. DO NOT place the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycling of batteries Panasonic Power Connection(Optional) Sony Power Connection(Optional) 1.Turn off the camera and take out the camera battery. 2.Put Sony/Panasonic Power Connection into the camera battery compartments. 3.Pull out the DC cable from the Power Connection and plug it in the DC output on the Moza AirCross. Moza AirCross User Battery Safety Guidelines 05 06 Follow Speed is set for the movement speed along with the operator. Five level profiles are available. Power Motor torque adjustment, please keep the original parameter. Calibrate Gyroscope and Accelerometer Calibration. More information please refer to page 13 or page 23. Motion Control Please refer to page 33 to learn how to set the Motion Control Manual Position Enable the Manual Position then use your hand to move the lens towards to the angles you need, then let go and it will stay on the current position. TipsDisable the follow mode on the current Adjustment Arm before enable the Manual Position. Habits Set the habits for joystick and display. Mode You can set the joystick to 4 direction or 8 direction. Remap the joystick Up Down PIT: Up or down to control the Pitch Adjustment Arm Up Down ROL: Up or down to control the Roll Adjustment Arm Up Down YAW: Up or down to control the Yaw Adjustment Arm Left Right PIT: Left or Right to control the Pitch Adjustment Arm Left Right ROL: Left or Right to control the Roll Adjustment Arm Left Right YAW: Left or Right to control the Yaw Adjustment Arm Reverse Reverse the current joystick direction. Custom Customize turn off the display after 1-60 minutes. Always On Display will always on. Version View the current firmware version of the wireless thumb controller. Moza AirCross User Wireless Thumb Controller 31 32 Pair 1. Choose Pair and move the joystick rightwards to enter the secondary menu. 2. Move the joystick downwards to choose the YES option 3. Move the joystick rightwards again to enter the Pairing mode. The interface of Pairing will appear. Then turn on Moza AirCross, the screen of the thumb controller shows OK in 5 seconds. Note: If the OK confirm is not shown on and you get a Pair ERR, please power off the Moza AirCross then turn it on and try it again. If the pair still fails, please check and update the firmware of your gimbal and wireless controller then try to pair them again (Keep both device firmware the most up to date). Save: Save the current setting at the Moza wireless thumb controller or it will go back to the last saving parameter. Confirm to save and the OLED display will showSet OK, if it showsSet ERRthen try the saving again. Camera More information please refer to the page 9 and learn the compatible camera brands which can trigger the picture taking or video shooting on the Moza AirCross. Tips: SelectOTHERprofile and plug the shutter cable to the camera double click on the power button on the handgrip to trigger the camera photo taking, or the advance time-lapse.. Profile There are 4 sets of parameters are optional for different camera and lens in different weights. Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune, which will tune the parameters automatically one time. Motor Turn on or off the motor. Follow Follow Enable: is set to enable or disable the follow function at the current Adjustment Arm. Moza AirCross User Wireless Thumb Controller 29 30 Mounting your camera Balance the Tilt Adjustment Arm Balancing the Roll Adjustment Arm Balancing the Yaw Adjustment Arm Balance the camera DC Input MOZA AirCross can be powered through External Power Inputpower supply cable is 3.5mm DCexternal power supply voltage is 12Velectric current is not less than 2Atry the DC adapter with the sign as below: 1.Please place the camera on the quick release plate, aim the 1/4" threaded hole at the bottom of the camera with the empty slot of the mounting plate. 2.then tighten the secure screw on the quick release system. 1.Please move the camera forward and backward until you find a position where the lens face front and the camera can keep complete still. 2.Tighten the camera lock-knob. 1.Please loosen Tilt Adjustment Screw and adjust the Tilt Adjustment Arm until it remains still with the lens facing vertical or toward the ground. 2.Once balanced tighten the Tilt Adjustment Screw. 1. Please loosen the quick Release system adjustment screw, be sure to leave a little space between the camera and the motor, in this case move the quick release plate to the till motor as possible as you can, then tighten the quick Release system adjustment screw. 2. Please loosen the Roll Adjustment Screw and adjust the Roll Adjustment Arm until the camera remains still and level with the horizon. 3. Once balanced tighten the Roll Adjustment Screw. 1.Please loosen the Yaw Adjustment Screw and adjust the Yaw Adjustment Arm until the camera remains still and level with the horizon. 2.Once balanced tighten the Yaw Adjustment Screw. Moza AirCross User Balancing 07 08 Mounting your camera Balance the Tilt Adjustment Arm Balancing the Roll Adjustment Arm Balancing the Yaw Adjustment Arm Balance the camera DC Input MOZA AirCross can be powered through External Power Inputpower supply cable is 3.5mm DCexternal power supply voltage is 12Velectric current is not less than 2Atry the DC adapter with the sign as below: 1.Please place the camera on the quick release plate, aim the 1/4" threaded hole at the bottom of the camera with the empty slot of the mounting plate. 2.then tighten the secure screw on the quick release system. 1.Please move the camera forward and backward until you find a position where the lens face front and the camera can keep complete still. 2.Tighten the camera lock-knob. 1.Please loosen Tilt Adjustment Screw and adjust the Tilt Adjustment Arm until it remains still with the lens facing vertical or toward the ground. 2.Once balanced tighten the Tilt Adjustment Screw. 1. Please loosen the quick Release system adjustment screw, be sure to leave a little space between the camera and the motor, in this case move the quick release plate to the till motor as possible as you can, then tighten the quick Release system adjustment screw. 2. Please loosen the Roll Adjustment Screw and adjust the Roll Adjustment Arm until the camera remains still and level with the horizon. 3. Once balanced tighten the Roll Adjustment Screw. 1.Please loosen the Yaw Adjustment Screw and adjust the Yaw Adjustment Arm until the camera remains still and level with the horizon. 2.Once balanced tighten the Yaw Adjustment Screw. Moza AirCross User Balancing 07 08 Pair 1. Choose Pair and move the joystick rightwards to enter the secondary menu. 2. Move the joystick downwards to choose the YES option 3. Move the joystick rightwards again to enter the Pairing mode. The interface of Pairing will appear. Then turn on Moza AirCross, the screen of the thumb controller shows OK in 5 seconds. Note: If the OK confirm is not shown on and you get a Pair ERR, please power off the Moza AirCross then turn it on and try it again. If the pair still fails, please check and update the firmware of your gimbal and wireless controller then try to pair them again (Keep both device firmware the most up to date). Save: Save the current setting at the Moza wireless thumb controller or it will go back to the last saving parameter. Confirm to save and the OLED display will showSet OK, if it showsSet ERRthen try the saving again. Camera More information please refer to the page 9 and learn the compatible camera brands which can trigger the picture taking or video shooting on the Moza AirCross. Tips: SelectOTHERprofile and plug the shutter cable to the camera double click on the power button on the handgrip to trigger the camera photo taking, or the advance time-lapse.. Profile There are 4 sets of parameters are optional for different camera and lens in different weights. Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune, which will tune the parameters automatically one time. Motor Turn on or off the motor. Follow Follow Enable: is set to enable or disable the follow function at the current Adjustment Arm. Moza AirCross User Wireless Thumb Controller 29 30 OLED Display Instruction Main Menu Functions Connection Moza AirCross Battery Controller Battery Recording Status Focus Speed Control Speed Follow Mode Long press Option Button to enter the main menu. Moza AirCross User Wireless Thumb Controller 27 28 Dual handle Setup Camera Control Cables Available operation modes Joystick Power button Install the two Side Handles and secure them by screwing them into each side of the handle clamp. Loosen the lock-screw in the middle of the handle clamp. Then clamp onto the handgrip of the Moza AirCross, adjust desired position and secure the lock-screw. Connect the camera to the Camera Connection (Mini-USB port) on the tilt motor with the control cable. Please make sure the cable doesn't affect the movement of the Moza AirCross. When finished, test by pressing the Power on/Off button on the Moza AirCross to start/stop the camera's recording. Check page 20 to select the right camera profile. Shutter cable is required when operating the advanced time-lapse. Sony control cable can be used as shutter cable on Sony camera with MULTI input. Other brand cameras shall purchase extra shuttle cable to enable the advanced time-lapse. Moza AirCross Controls 1.Yaw-follow mode: The Yaw Adjustment Arm follow the movement while the Tilt and Roll Adjustment Arm are locked. 2.Tilt - Yaw follow mode: The Tilt and Yaw Adjustment Arm follows the movement while the Roll Adjustment Arm is locked. 3.All lock mode: All three Adjustment Arm are locked. 4.Roll-follow mode: The Roll Arm Adjustment Arm follows the movement while the Tilt and Yaw Adjustment Arm are locked. 1.One quick press: Yaw-follow mode. 2.Double quick press: Tilt-yaw follow mode. 3.Triple quick press: All-lock mode. 4.Four times quick press: Roll-follow mode. 5.Long press/quick press again: Enable sleeping mode/ wake up . 6.Normal turning on, then hold down the joystick while quick press the power button: Auto-Tune. 7.Normal turning on, then hold down the joystick while three times quick press the power button: Six direction calibration. 1.One quick press: Start/Stop recording. 2.Double quick press: Photo-taking. 3.Triple quick press: auto-center. 4.Four times press: Enable roll control. 5.Long press: Power on/off the Moza AirCross. Model Example Recording Recording control cable Picture taking Picture taking control cable EOS DSLR Canon 5D360D support Canon control cable support C1 or C2 shutter cable EOS Cinema Alpha Sony A7sA7s2 support Sony control cable support Sony control cable or S1 shutter cable GH Panasonic GH3GH4 support Panasonic control cable support BMD BMPCBMPCC support Panasonic control cable Not Support NIKON D4D800 support N1 or N3 shutter cable OTHERS support Camera typical shutter cable Moza AirCross User Controls 09 10 Dual handle Setup Camera Control Cables Available operation modes Joystick Power button Install the two Side Handles and secure them by screwing them into each side of the handle clamp. Loosen the lock-screw in the middle of the handle clamp. Then clamp onto the handgrip of the Moza AirCross, adjust desired position and secure the lock-screw. Connect the camera to the Camera Connection (Mini-USB port) on the tilt motor with the control cable. Please make sure the cable doesn't affect the movement of the Moza AirCross. When finished, test by pressing the Power on/Off button on the Moza AirCross to start/stop the camera's recording. Check page 20 to select the right camera profile. Shutter cable is required when operating the advanced time-lapse. Sony control cable can be used as shutter cable on Sony camera with MULTI input. Other brand cameras shall purchase extra shuttle cable to enable the advanced time-lapse. Moza AirCross Controls 1.Yaw-follow mode: The Yaw Adjustment Arm follow the movement while the Tilt and Roll Adjustment Arm are locked. 2.Tilt - Yaw follow mode: The Tilt and Yaw Adjustment Arm follows the movement while the Roll Adjustment Arm is locked. 3.All lock mode: All three Adjustment Arm are locked. 4.Roll-follow mode: The Roll Arm Adjustment Arm follows the movement while the Tilt and Yaw Adjustment Arm are locked. 1.One quick press: Yaw-follow mode. 2.Double quick press: Tilt-yaw follow mode. 3.Triple quick press: All-lock mode. 4.Four times quick press: Roll-follow mode. 5.Long press/quick press again: Enable sleeping mode/ wake up . 6.Normal turning on, then hold down the joystick while quick press the power button: Auto-Tune. 7.Normal turning on, then hold down the joystick while three times quick press the power button: Six direction calibration. 1.One quick press: Start/Stop recording. 2.Double quick press: Photo-taking. 3.Triple quick press: auto-center. 4.Four times press: Enable roll control. 5.Long press: Power on/off the Moza AirCross. Model Example Recording Recording control cable Picture taking Picture taking control cable EOS DSLR Canon 5D360D support Canon control cable support C1 or C2 shutter cable EOS Cinema Alpha Sony A7sA7s2 support Sony control cable support Sony control cable or S1 shutter cable GH Panasonic GH3GH4 support Panasonic control cable support BMD BMPCBMPCC support Panasonic control cable Not Support NIKON D4D800 support N1 or N3 shutter cable OTHERS support Camera typical shutter cable Moza AirCross User Controls 09 10 OLED Display Instruction Main Menu Functions Connection Moza AirCross Battery Controller Battery Recording Status Focus Speed Control Speed Follow Mode Long press Option Button to enter the main menu. Moza AirCross User Wireless Thumb Controller 27 28 Set the shutter time, the shutter duration, the video frame rate and the total length of the shot a. Shutter time > shutter duration > camera shutter time Recommended Settings: Shutter duration = camera shutter time +1S Shutter Interval = camera shutter time +2S For example: the shutter time of the camera is 1, so the shutter duration is 2 and the shutter time is 3. b. The App automatically calculates the number of images can be taken after saving the setting above. Preview the delay setting path, while the stabilizer will move according to the set trajectory, but will not take photos. After preview, you can start the time-lapse photography Wireless Thumb Controller(Optional Accessory) Joystick 1.Moza AirCross Moza AirCross remote control. 2.Up/down: Select the item at the menu. 3.Left: Go back to the upper menu. 4.Right: Go to the next menu or save the changes. SPEED Button 1.Quick press to select the speedL,M,H. 2.Long press to select between Focusing speed and Moza AirCross moving speed. OPTIONS Button 1.Quick press to switch the follow mode (Default yaw-follow, yaw-pitch follow, roll follow and all-lock). 2.Long press to enter the setting menu. ON/OFF Button 1.Long press the button to power on/off the Moza AirCross. 2.Quick press to start camera REC, quick press again to stop camera REC. Roller 1.Use the Roller knob to control camera focus by rolling the knob left to right. Available for Canon camera with USM lens. 2.Double quick press the roller to re-center the Moza AirCross. USB Port 1.Charging the thumb controller. 2.Firmware update. Moza AirCross User Wireless Thumb Controller 25 26 Part1: Moza AirCross firmware update tutorial. Firmware Update This tutorial contains two parts Moza AirCross firmware update tutorial. Wireless thumb controller firmware update tutorial. Notice: AttentionAll the firmware files are available on the server, Gudsen has not released any Moza product firmware update packages on the network. The only access to do the update is upgrading via Moza Assistant software. Step 1Download Moza Assistant Please download the Moza Assistant from here: http://www.gudsen.com/moza-AirCross-downloads.html, and select the proper software according to your computer operating system. Download the software package and unzip the files and install the driver. Please refer to the link below if your Mac computer reject the driver installation and get the error message like the picture suggested: http://www.iclarified.com/28180/how-to-open-applications-from-unidentified-developers-in-mac-os-x-mountain-lion Step 2Enter upgrade mode and start to upgrade Plug in the Moza AirCross on the computer and run the Moza Assistant software. Hold down the joystick and quick press the power button on the Moza AirCross, the LED will turn to solid blue and the below software interface will pop up. Click on Upgrade button to start the update. It will take about 1 to 2 minutes to finish it, the software interface will show on when the upgrade is finished Turn off the Moza AirCross first (important!), then close the software, and long pressing the power button to turn on the Moza AirCrossNot enter upgrade mode, just regular power on the gimbaland run the Moza Assistant software again. Moza AirCross User Firmware Update 11 12 Part1: Moza AirCross firmware update tutorial. Firmware Update This tutorial contains two parts Moza AirCross firmware update tutorial. Wireless thumb controller firmware update tutorial. Notice: AttentionAll the firmware files are available on the server, Gudsen has not released any Moza product firmware update packages on the network. The only access to do the update is upgrading via Moza Assistant software. Step 1Download Moza Assistant Please download the Moza Assistant from here: http://www.gudsen.com/moza-AirCross-downloads.html, and select the proper software according to your computer operating system. Download the software package and unzip the files and install the driver. Please refer to the link below if your Mac computer reject the driver installation and get the error message like the picture suggested: http://www.iclarified.com/28180/how-to-open-applications-from-unidentified-developers-in-mac-os-x-mountain-lion Step 2Enter upgrade mode and start to upgrade Plug in the Moza AirCross on the computer and run the Moza Assistant software. Hold down the joystick and quick press the power button on the Moza AirCross, the LED will turn to solid blue and the below software interface will pop up. Click on Upgrade button to start the update. It will take about 1 to 2 minutes to finish it, the software interface will show on when the upgrade is finished Turn off the Moza AirCross first (important!), then close the software, and long pressing the power button to turn on the Moza AirCrossNot enter upgrade mode, just regular power on the gimbaland run the Moza Assistant software again. Moza AirCross User Firmware Update 11 12 Set the shutter time, the shutter duration, the video frame rate and the total length of the shot a. Shutter time > shutter duration > camera shutter time Recommended Settings: Shutter duration = camera shutter time +1S Shutter Interval = camera shutter time +2S For example: the shutter time of the camera is 1, so the shutter duration is 2 and the shutter time is 3. b. The App automatically calculates the number of images can be taken after saving the setting above. Preview the delay setting path, while the stabilizer will move according to the set trajectory, but will not take photos. After preview, you can start the time-lapse photography Wireless Thumb Controller(Optional Accessory) Joystick 1.Moza AirCross Moza AirCross remote control. 2.Up/down: Select the item at the menu. 3.Left: Go back to the upper menu. 4.Right: Go to the next menu or save the changes. SPEED Button 1.Quick press to select the speedL,M,H. 2.Long press to select between Focusing speed and Moza AirCross moving speed. OPTIONS Button 1.Quick press to switch the follow mode (Default yaw-follow, yaw-pitch follow, roll follow and all-lock). 2.Long press to enter the setting menu. ON/OFF Button 1.Long press the button to power on/off the Moza AirCross. 2.Quick press to start camera REC, quick press again to stop camera REC. Roller 1.Use the Roller knob to control camera focus by rolling the knob left to right. Available for Canon camera with USM lens. 2.Double quick press the roller to re-center the Moza AirCross. USB Port 1.Charging the thumb controller. 2.Firmware update. Moza AirCross User Wireless Thumb Controller 25 26 Gyroscope and Accelerometer Calibration Advanced time lapse Click on the Gyroscope/Accelerometer Calibration button on the device page and this notification will show on. Please click on OK button to go on the calibration. Then begin with the gyroscope calibration as the pictures shown below, you can go back to the device page by clicking on the white triangle button. It takes 5-10 seconds to finish gyroscope calibration, leave the Moza AirCross alone and keep it still during the calibration. After the gyroscope calibration then begin with the accelerometer calibration. Please follow the picture to adjust it at the correct position, make sure Camera Holder is horizontal against the surface of the desk, then click on Start to do the accelerometer calibration. It takes about 5-10 seconds to finish the accelerometer calibration. Mount the camera on the Moza AirCross then turn it on Set the camera on Manual Focus mode, set camera shutter, ISO, aperture and turn off the Steady Shot feature of the camera(Here we use Sony camera as an example in the tutorial). Turn on mobile phone Bluetooth, run the MOZA Assistant App and connect it to the Moza AirCross. Enter the App main interface, select parameter setting, and switch your current camera model (Here we use Sony camera as an example in the tutorial) and save it. More information Please refer to the Support Camera Form at page 9. Connect the camera to the Moza AirCross with the camera control cable and go back to the Home page and select Advanced Time-Lapse Use the app to set the camera movement. Notice: Up to 8 points can be add on the motion time-lapse. Moza AirCross User Advanced time lapse 23 24 Step 3Gyroscope/Accelerometer Calibration A normal turning on will lead to the software interface below, and click on the calibration button on the top bar. Uncheck the "Motor On/Off on the calibration interface. Here is the software interface when you shut off the motor Please try to keep the Moza AirCross still then click on "Start button under gyroscope calibration, Software interface below will show up which means is a successful calibrationIt takes about 5-10 seconds to do the gyroscope calibration). Click Start, before accelerometer calibration, the Moza AirCross needs to be laid down on the desk like the picture suggested. Moza AirCross User Calibration 13 14 Step 3Gyroscope/Accelerometer Calibration A normal turning on will lead to the software interface below, and click on the calibration button on the top bar. Uncheck the "Motor On/Off on the calibration interface. Here is the software interface when you shut off the motor Please try to keep the Moza AirCross still then click on "Start button under gyroscope calibration, Software interface below will show up which means is a successful calibrationIt takes about 5-10 seconds to do the gyroscope calibration). Click Start, before accelerometer calibration, the Moza AirCross needs to be laid down on the desk like the picture suggested. Moza AirCross User Calibration 13 14 Gyroscope and Accelerometer Calibration Advanced time lapse Click on the Gyroscope/Accelerometer Calibration button on the device page and this notification will show on. Please click on OK button to go on the calibration. Then begin with the gyroscope calibration as the pictures shown below, you can go back to the device page by clicking on the white triangle button. It takes 5-10 seconds to finish gyroscope calibration, leave the Moza AirCross alone and keep it still during the calibration. After the gyroscope calibration then begin with the accelerometer calibration. Please follow the picture to adjust it at the correct position, make sure Camera Holder is horizontal against the surface of the desk, then click on Start to do the accelerometer calibration. It takes about 5-10 seconds to finish the accelerometer calibration. Mount the camera on the Moza AirCross then turn it on Set the camera on Manual Focus mode, set camera shutter, ISO, aperture and turn off the Steady Shot feature of the camera(Here we use Sony camera as an example in the tutorial). Turn on mobile phone Bluetooth, run the MOZA Assistant App and connect it to the Moza AirCross. Enter the App main interface, select parameter setting, and switch your current camera model (Here we use Sony camera as an example in the tutorial) and save it. More information Please refer to the Support Camera Form at page 9. Connect the camera to the Moza AirCross with the camera control cable and go back to the Home page and select Advanced Time-Lapse Use the app to set the camera movement. Notice: Up to 8 points can be add on the motion time-lapse. Moza AirCross User Advanced time lapse 23 24 Balance Parameter There are four groups parameters for selecting are listed as below: 1(Profile 1); 2(Profile 2); 3(Profile 3); 4(Profile 4); Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune feature at the same interface. Follow Mode There are 4 kinds of follow mode, they are listed below: Yaw-follow mode; Pitch-follow mode; Pitch-yaw follow mode; All-lock mode; Roll follow mode; User-defined; Please check the page 10 to learn more about operation mode. Yaw/Pitch/Roll Adjustment Arm parameter setting. The motor parameters for yaw/pitch/roll. Follow EnableEnable the follow mode at the current Adjustment Arm. Motion Control EnableThe current Adjustment Arm is no longer functional at the Motion Control when it is disable. Manual Positioning EnableThe camera can lock on at the specific position manually when the current Adjustment Arm is no at the follow mode. Follow Speed & Control Speed Follow Speed The speed of the Moza AirCross follow movement. Range from 0-100. Control Speed The sensitivity of joystick speed to control the Moza AirCross movement. Range from 0-100. Auto Tune Moza will tune the parameters automatically one time. For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually. Save Parameters Save the parameters you set. Your Moza device will automatically use the parameters pre-set well next time. Reset Current Parameters Reset current parameters and restore to its default values. Factory Reset Rest all parameters and restore to its default values. Moza AirCross User Parameter 21 22 Part 2: MOZA Thumb controller firmware upgrade Tutorial Please make sure the Camera Holder is absolutely parallel to the surface of the desk, then the "OK button to begin the calibration, Software interface will show on when it is a successful calibrationIt takes about 5-10 seconds to do the accelerometer calibration). Please turn off the Moza AirCross then turn it on again via long pressing the power button, and unplug it from computer, then enjoy your Moza AirCross Step 1: Enter upgrade mode With the thumb controller off, long press "SPEED without releasing it, connect controller to computer through USB port, release "SPEED button when the screen displays "connecting. Moza AirCross User Thumb controller firmware 15 16 Part 2: MOZA Thumb controller firmware upgrade Tutorial Please make sure the Camera Holder is absolutely parallel to the surface of the desk, then the "OK button to begin the calibration, Software interface will show on when it is a successful calibrationIt takes about 5-10 seconds to do the accelerometer calibration). Please turn off the Moza AirCross then turn it on again via long pressing the power button, and unplug it from computer, then enjoy your Moza AirCross Step 1: Enter upgrade mode With the thumb controller off, long press "SPEED without releasing it, connect controller to computer through USB port, release "SPEED button when the screen displays "connecting. Moza AirCross User Thumb controller firmware 15 16 Balance Parameter There are four groups parameters for selecting are listed as below: 1(Profile 1); 2(Profile 2); 3(Profile 3); 4(Profile 4); Please begin with profile 4. If you get the vibration with the current profile, select a lower one until the vibration is gone. Or you can try the Auto-Tune feature at the same interface. Follow Mode There are 4 kinds of follow mode, they are listed below: Yaw-follow mode; Pitch-follow mode; Pitch-yaw follow mode; All-lock mode; Roll follow mode; User-defined; Please check the page 10 to learn more about operation mode. Yaw/Pitch/Roll Adjustment Arm parameter setting. The motor parameters for yaw/pitch/roll. Follow EnableEnable the follow mode at the current Adjustment Arm. Motion Control EnableThe current Adjustment Arm is no longer functional at the Motion Control when it is disable. Manual Positioning EnableThe camera can lock on at the specific position manually when the current Adjustment Arm is no at the follow mode. Follow Speed & Control Speed Follow Speed The speed of the Moza AirCross follow movement. Range from 0-100. Control Speed The sensitivity of joystick speed to control the Moza AirCross movement. Range from 0-100. Auto Tune Moza will tune the parameters automatically one time. For some special camera setup the Auto-Tune couldn't select the best profile for your Moza gimbal, please select the profile manually. Save Parameters Save the parameters you set. Your Moza device will automatically use the parameters pre-set well next time. Reset Current Parameters Reset current parameters and restore to its default values. Factory Reset Rest all parameters and restore to its default values. Moza AirCross User Parameter 21 22 Home Page Device page Remote Control Page Parameter Setting Moza App Instruction Firmware Version Battery Life Status Bluetooth Signal Device Name Motor On/Off button Re-Center Parameter Settings Joystick&normal time-lapse Calibration Advanced time-lapse 1. Recenter the Moza AirCross 2. Joystick 3. Roll Control 4. Normal Motion Time-Lapse *The Roll control is only available at this page, the default angle is 045. Click on the Normal Motion Time-Lapse this page will show on. Basic time -lapse motion can be set for your Moza AirCross. Camera Model: There are 4 types of camera models available on start/stop remote control are listed as below: EOS DSLR profile for Canon series(Canon 5D /5D /60D /7D /70D). Alpha profile for Sony series (a7S /a7S /a7R /a7R). GH profile for Panasonic camera(GH3 /GH4). BMD profile for Blackmagic Design camera (BMPCC /BMCC /BMPC). *Canon 5D is available as well, but it needs to purchase an extra camera control wire, please contact support@gudsen.com for the solution. Moza AirCross User MOZA Assistant APP 19 20 Mobile App Desktop App(GUI) Step 2 Launch MOZA-Assistant after installing the driver. When the screen displays "Connect OK, MOZA-Assistant enters the interface of firmware upgrade. Ensure the network being connected, MOZA-Assistant will display information of firmware version and upgrade, click Upgrade to start upgrading the thumb controller. When the update is done, the thumb controller display will show the Upgraded OK information, the firmware update for wireless thumb controller is completed! App Installation MOZA Assistant App is available both in Apple Store and Google Play Store. iOS use the keyword MOZA to search or scan the QR Code to download it on your phone. Android use the keywordMoza Assistant to search or scan the QR Code to download it on your phone. iOS Android The GUI is a desktop software to update the gimbal firmware and change parameters of the gimbal. It is free to download at: http://www.gudsen.com/moza-AirCross-downloads.html Moza AirCross User MOZA Assistant APP 17 18 Mobile App Desktop App(GUI) Step 2 Launch MOZA-Assistant after installing the driver. When the screen displays "Connect OK, MOZA-Assistant enters the interface of firmware upgrade. Ensure the network being connected, MOZA-Assistant will display information of firmware version and upgrade, click Upgrade to start upgrading the thumb controller. When the update is done, the thumb controller display will show the Upgraded OK information, the firmware update for wireless thumb controller is completed! App Installation MOZA Assistant App is available both in Apple Store and Google Play Store. iOS use the keyword MOZA to search or scan the QR Code to download it on your phone. Android use the keywordMoza Assistant to search or scan the QR Code to download it on your phone. iOS Android The GUI is a desktop software to update the gimbal firmware and change parameters of the gimbal. It is free to download at: http://www.gudsen.com/moza-AirCross-downloads.html Moza AirCross User MOZA Assistant APP 17 18 Home Page Device page Remote Control Page Parameter Setting Moza App Instruction Firmware Version Battery Life Status Bluetooth Signal Device Name Motor On/Off button Re-Center Parameter Settings Joystick&normal time-lapse Calibration Advanced time-lapse 1. Recenter the Moza AirCross 2. Joystick 3. Roll Control 4. Normal Motion Time-Lapse *The Roll control is only available at this page, the default angle is 045. Click on the Normal Motion Time-Lapse this page will show on. Basic time -lapse motion can be set for your Moza AirCross. Camera Model: There are 4 types of camera models available on start/stop remote control are listed as below: EOS DSLR profile for Canon series(Canon 5D /5D /60D /7D /70D). Alpha profile for Sony series (a7S /a7S /a7R /a7R). GH profile for Panasonic camera(GH3 /GH4). BMD profile for Blackmagic Design camera (BMPCC /BMCC /BMPC). *Canon 5D is available as well, but it needs to purchase an extra camera control wire, please contact support@gudsen.com for the solution. Moza AirCross User MOZA Assistant APP 19 20 FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-03-13 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-03-13
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Gudsen Technology Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0026612770
|
||||
1 | Physical Address |
6F, 10th Building, Jiuxiang Ling Industrial Park Ave Xili, Nanshan District.
|
||||
1 |
F6, 10th Building, Jiuxiang Ling Industrial Park
|
|||||
1 |
Shenzhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AMJR
|
||||
1 | Equipment Product Code |
AIRCROSS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P****** Z****
|
||||
1 | Title |
Product Manager
|
||||
1 | Telephone Number |
86-18********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
p******@gudsen.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MOZA AirCross | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen LCS Compliance Testing Laboratory Ltd.
|
||||
1 | Name |
G****** L****
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
g******@lcs-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0009000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC