FCC ID: 2AMJR-MINIP MOZA Mini-P

Mini-P User manual EN.......................................................................................................1 Battery and Charging The MOZA Mini-P has a built-in lithium battery. Fully charge the battery before first use. The LED power indicator blinks when the battery level is less than 20%. Charge it with an universal USB-C cable, Mini-P can be charged through a phone charger and mobile power supplier. The charging stops automatically when the battery is fully charged. Notes:

1. Please do not over-charge or over-discharge the battery. Otherwise the battery will be damaged;

2. Recharge and discharge the battery every 3 months to keep it intact if it is left unused for a long time. Mini-P Overview Camera Control Port L-Bracket Quick Release Plate Roll Storage Lock Pan Motor Lock Slide Lock Power Button USB-C Charging Port L-Bracket Quick Release Plate Lock Knob Tilt Storage Lock Joystick Dial Wheel Battery Level Indicator Tilt Knob

Roll Knob Pan Knob Trigger 1 Mini-P Installation

a. Folded Status Slide the slide lock and rotate the gimbal 180 anticlockwise.Then it locks automatically.

Slide the slide lock and rotate the gimbal 180 clockwise. Then it locks automatically.

protect from constant movement. a. Slide the tilt storage lock on the roll arm(Picture a), slide the tilt arm downwards(Picture b), place the L-Bracket lock knob into the tilt storage lock groove, then the tilt motor storage is complete. b. Slide the roll arm downwards, place the roll arm between the 2 bosses on the silicone sleeve of the pan motor (Picture b), then the roll motor storage is complete. c. Slide the pan motor lock upwards(Picture c) then the pan motor storage is complete.

1 2 gimbal.

2

a. Screw the tripod tightly into the 1/4" hole at the bottom of the

1 2

Horizontal Mounting a. Place the longer side of the L-Bracket under the camera, and secure the camera with a 1/4screw. b. Loosen the L-Bracket quick release plate lock knob, slider the shorter side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob. Vertical Mounting a. Place the longer side of the L-Bracket under the camera to secure it, and lock the camera with a 1/4screw. b. Loosen the L-Bracket quick release plate lock knob, slider the longer side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob.

release plate with 1/4screw, make sure that front side with clips is backward;

b. Put the phone in the phone holder, ensure that the clips do not touch the power key or volume key;

c. Loosen the L-Bracket quick release plate lock knob, slider the shorter side of the L-Bracket quick release plate into center of the quick-release base, then lock the knob.

Note: Please hold your phone or camera tight when loosen the L-Bracket quick release plate lock knob and remove the L-Bracket quick release plate to prevent the camera or mobile phone from falling to the ground.

3 Balancing a. Loosen the tilt knob, and adjust the tilt arm back and forth until the lens is horizontally forward, then lock the knob. b. Rotate the camera until the lens is facing up, loosen the L-Bracket quick release plate lock knob, and adjust the L-Bracket quick release plate back and forth until the lens is straight up (leveled), then lock the knob. c. Loosen the roll knob, adjust the roll arm left and right until the roll arm remains horizontal, then lock the knob; The camera or phone should be leveled and can be positioned in any direction (up or down) and it stays there. d. Hold the stabilizer horizontally and make the pan arm parallel to the ground, then loosen the pan knob, adjust the pan arm left and right until the pan arm remains horizontal, and then lock the knob. Your camera or phone should be leveled and can be move to any direction (tilt, pan, roll) and stays on that position without hands holding it.

the balance is not adjusted accurately, it will cause the abnormal motor work, motor overheat, unstable video, unavailable of certain functions, and also shorten battery life, please make sure it is completely balanced before turning on the gimbal. Connecting camera or mobile phone a. After the camera is installed, you can use the camera control cable to connect the gimbal and the camera, and you can control the gimbal through the MOZA Master App. You will need to balance with the camera control cable attached. b. After the mobile phone is installed, use the MOZA Genie App, connect the gimbal, and you can take photos or videos through the gimbal. NOTE: For camera functions and features, please use Moza Master App. For Phone controls, please use Moza Genie App. 4 Button Features Simplified Operation Down Button

Joystick

The speed of camera moving increases with the larger moving range of joystick Follow Function

Press twice the left button: FPV mode. Press twice again to stop Check the Battery Level Battery Level Indicators

Trigger

Double press: Re-center

Press once+hold: Switch to tilt follow

5 Control via Mobile Phone

(once paired through MOZA Genie App) Press the center button once: start/ stop recording

(only valid in video mode) Press twice the center button during recording:

take one photo (in video mode) Long press the center button:confirm to move timelapse point (in advanced timelapse mode) Press the top button once: open the menu Press twice the top button: switch to video mode/photo mode Long press the top button for 3s: switch to front camera/

rear camera Press the right button once: photo playback in album. Press once again to return to the camera After the completion of timelapse points setting, long press the right button: start/stop advanced timelapse shooting (in advanced timelapse mode) Double press the down button: Sport gear mode Triple press the down button: Inception mode (115) Press twice the left button: FPV mode Press twice again to stop Hold the top focus button: Focus+

Double press the top focus button: Automatic uniform focus+

Hold the down focus button: Focus-

Double press the down focus button: Automatic uniform focus-

Functions Description of the Gimbal

a. Install the camera on the gimbal, then you can use the shutter control cable to connect the gimbal and camera. Press the center button once to take a photo in photo mode. Press the center button once to start/stop recording in video mode. b. Install the phone on the gimbal, then turn on the MOZA Genie App and connect the gimbal to the MOZA Genie App. Press the center button once to take a photo in photo mode. Press the center button once to start/stop recording in video mode. c. Double press the top button to switch the video mode/photo mode

(requires 2 smartphones: one on gimbal and one to control the mimic. If plan to use the camera on gimbal, only one smartphone is required) 6 a. Place the smartphone on the Gimbal through the phone holder;

b. Use a 2nd smartphone and pen the MOZA Master App, connect it to the gimbal and enter Mimic Motion Control Mode;

c. Rotate the 2nd phone and it will control the movement of the gimbal.

Use the MOZA Master App or MOZA Genie App to connect the gimbal, selectCreative videobutton and there will be multiple timelapse modes for shooting.

By default, we mount the camera handle near the tilt motor so that

we need to mount the camera control port near the tilt motor for normal use. The following situations will require reverse mounting:

a. The camera is too wide for forward mounting. b. The lens used is too heavy to be balanced when forward mounting. Reverse mounting steps

it on the bottom of the camera

be on the left of the roll motor. c. Mount the shorter side of the L-Bracket to the quick release baseplate.

Mount the phone on the gimbal, connect the Genie App to enter object tracking mode, select subject/object on the screen to be tracked and the gimbal will start object tracking shooting.

The Inception Mode is used to control the camera to rotate in the roll direction for shooting upside down and rotating footage. Triple press the down button on the dial to enter the Inception Mode. Press the left/right button on the dial then the motor rotates to the left/right automatically.

Double press the left button on the dial to enter the FPV mode. 7

a. When the gimbal is powered off, long press the center button, then press the power button with the other handuntil the battery indicator start flashing (Boot Mode). b. Start the MOZA Master App, press Bluetooth to search for device then connect it. c. The App will automatically enter the firmware upgrade interface, After the firmware download is complete, click the "Upgrade"

button to start the upgrade. d. After the upgrade is complete, turn the gimbal off and back on again. Then calibrate the gyroscope and accelerometer to get started. You can connect to the MOZA Master App to check the version number of the Mini-P. Note:

1. Make sure the gimbal is fully charged and the computer or mobile phone network connection is normal during the upgrade. 2. Do not disconnect the gimbal from power, USB-C cable or Bluetooth during the upgrade, otherwise the upgrade will fail. 3. When using the App upgrade, the upgrade process takes a

background, and do not turn off the screen to avoid upgrade failure. 4. If all fails, reboot the gimbal and try to upgrade again until the upgrade is completed.

Calibration The MOZA Mini-P needs to be calibrated when:

a. The device works abnormally;

b.There is a deviation in the horizontal angle after the gimbal is turned on (not leveled), and it is unable to resolve after one-click re-center;

c. Deviation caused by the environment in which the gimbal is used. Calibration method: Please scan the QR code at the end of the page for details.

If you use the camera on the gimbal, you can scan the QR code to download the MOZA Master App, or you can search for "MOZA Master" directly in the mobile app store to download. (See App download QR code at the end of the page) Note:

1. The mobile phone system supported by MOZA Master are iOS and Android. 2. Smartphone cannot be paired with the gimbal directly via Bluetooth. You must use the MOZA Master App to connect. 8 If you use a mobile phone on the gimbal, you can directly scan the QR code to download "MOZA Genie "(Android 5.0 or higher, IOS 9.0 or higher), or you can search for" MOZA Genie "directly in the mobile app store to download. (See the QR code at the end of the page) Note 1. When using the Mini-P with a mobile phone to take photos, please use the app MOZA Genie, which is customized for the Mini-P, so that you can use various functions of gimbal more creatively. 2. Please check for the latest version of the App, which is subject to update without notice. For updates or latest information, please visit MOZA's official website,WeChat subscription account and mobile application stores.

Payload Weight Dimensions (mm) Specs

Gimbal (folded): 165*200*100 Gimbal (unfolded): 320*140*150 Supported Phone Size 58 ~ 88mm Battery Life Battery Specs 12 (h)

Charging Time 1.5 (h) Mechanical Endpoint Range Pan360 Roll310 Tilt20

9

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

1 2 3 4 5 6 A Label& Location THIS SIDE UP Model/: Mini-P FCC ID: 2AMJR-MINIP R-C-GdS-MINIP MADE IN CHINA A B C D D Shenzhen Gudsen Technology Co., Ltd 1 2 3 4 5 6

Shenzhen Gudsen Technology Co., Ltd Agent Authorization Company: Shenzhen Gudsen Technology Co., Ltd Address: 6/F, 10th Building, Jiuxiang Ling Industrial Park, Ave Xili, Nanshan District, Shenzhen, China Product Name: MOZA Mini-P Model Number(s): MINI-P Product Description: MOZA Mini-P We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2020/04/10 Signature:

Name:

Peng Zhou Title:

Product Manager Company: Shenzhen Gudsen Technology Co., Ltd

< Shenzhen Gudsen Technology Co., Ltd >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/04/10 Subject; Request for Confidentiality FCC ID: 2AMJR-MINIP To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Peng Zhou Title: Product Manager Email: pzhou@gudsen.cn