FCC ID: 2AMJR-RSD00 RS Steering Wheel

RS series steering wheel Run all out while keeping the car under control User manual 01 RGB 24 02 RS RS D 1. 66 2. 3. 4. 03 MOZA Pit House LED LED7 100*142mm 01 Product Description Dual-Clutch Photoelectric Magnetic Paddles. RGB Programmable Flow Shift Light. Advanced Programmable Buttons and Knobs. D1 Style Quick Release. Wireless Technology. 02 How to Use the Quick Release OR Quick Release Setup RS-O Racing Wheels R-D Racing Wheels 1. Aline the 6 steel balls on the steering wheel quick release female connector to the corresponding 6 grooves on the base quick release male connector. 2. Press the steering wheel down to join the connectors. 3. Once locked check to ensure the steering wheel is connected to base by rotating the wheel. 4. To remove the steering wheel, pull up the golden sleeve with both hands and remove the steering wheel at the same time. 03 Racing Wheel Conguration The steering wheel can be set conveniently and quickly in the MOZA Pit House Software. Down paddle mode: Set the mode of double clutch paddles, which can be set as left and right composite axes, left and right independent axes and keys respectively. Speed follow-up: Turn on or off the linkage between LED shift indicator and speed. Indicator display mode: It is divided into mode 1 and mode 2. When the mouse moves over the option, a detailed explanation will pop up. Speed prompt setting: It is divided into advance type, standard type and limit type. according to the relationship between speed and the time when the shift indicator light is on. Color setting: 7 colors can be set separately for each LED. Brightness adjustment: Adjust the brightness of the shift indicator. Dial calibration: click here to calibrate the dial when the dial sensing is abnormal. 05 Installation of Magnetic Suction Paddle Mute Pad FCC Warning Place the steering wheel on a at surface with the surface facing down, use a hexagonal wrench to remove the screw on one side of the shift paddle trigger rod, and then use a wrench to push the pin from the side of the magnetic suction paddle (it is not necessary to push the pin out completely, only to separate the magnetic suction paddle trigger rod and the pin), and then stick the mute pad on the convex position on the back of the paddle trigger rod, as shown in the gure. Finally, return the latch, and replace the screw. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

(for detailed steering wheel settings and functions, please visit the ofcial website of MOZA Racing) 04 Installation of Paddle Approach Block Use the hexagon wrench in the screw kit to remove the two screws on the shift paddle, add the heightening block, and tighten it with the attached long screw. Using this gasket, Hexagon screwdriver M3x14 screw x8 the distance between the paddle and the hand can be shortened by 8mm. 8mm aluminum alloy approach block x4 Mute pad x4 06 Packing List 1. RS steering wheel 2. tool kit:

07 Product Spec For more information and teaching videos, please log in to the ofcial website.

-Reorient or relocate the receiving antenna. Frame material: Brushed aluminum alloy. LED color: 7-color custom. Panel material: Forged Carbon Fiber. Intelligent telemetry: Supported. Rear shell material: Aluminum alloy. Lights setting via Moza Pit House:

Paddle material: 3mm thick forged carbon ber Supported. Size: 13 inches (325mm). Magnetic paddle: 2. Double clutch paddles: 2. Steering Wheel Quick Release: D1 racing quick release. Power supply mode: Wireless. Mechanical keyboard texture keys: 10. Signal transmission mode: Wireless. 20 Section knob (can be pressed): 2. Induction mode of magnetic paddle:

Universal rocker (can be depressed): 2. Photoelectric. Racing horn: 1. Magnetic suction paddle mode:

Highlight led RGB beads: 10. Double Clutch / Single Clutch / Switch. MOZA Racing 04 8mm 05 12 06 1. RS 2. 8mmx4 M3x14x8 x4 07 3mm 13325mm 2 2 10 202 2

1. 2. 3. 4. 5. 6. MOZAMOZA 1 LED RGB10 LED7 D1 MOZA Pit House

QC PASS 03

45 mm Product Name:RS Steering Wheel Model:RS Input12V0.67A 7.2W manufacturerShenzhen Gudsen Technology Co., LTD 30 mm 214XXXXXX FCC ID: 2AMJR-RSD00 13.83mm*4.064mm Label location

Shenzhen Gudsen Technology Co., LTD

(Date) 2022-04-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (Shenzhen Microtest Co., Ltd) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature:

Name: Peng Zhou Job Title: Product Manager Email Address: pzhou@gudsen.cn Company name: Shenzhen Gudsen Technology Co., LTD Address: Room 1903-1904, Building 3, Nanshan Zhiyuan Chongwen Park, No. 3370 Liuxian Avenue, Nanshan District, Shenzhen

Shenzhen Gudsen Technology Co., LTD

(date) 2022-04-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (RS Steering Wheel / RS, CS, GS, FS, D05, D06 AND FCC ID: 2AMJR-RSD00) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Block Diagram Operation Description Schematic required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST The above documents are company proprietary information that could never get into the possession of your competition Please contact me if there is any information you may need. Sincerely, Signature:

Name: Peng Zhou Job Title: Product Manager Email Address: pzhou@gudsen.cn Company name: Shenzhen Gudsen Technology Co., LTD Address: Room 1903-1904, Building 3, Nanshan Zhiyuan Chongwen Park, No. 3370 Liuxian Avenue, Nanshan District, Shenzhen

Shenzhen Gudsen Technology Co., LTD Model difference statement Product Name: RS Steering Wheel Model No.: RS, CS, GS, FS, D05, D06 We (Shenzhen Gudsen Technology Co., LTD., Room 1903-1904, Building 3, Nanshan Zhiyuan Chongwen Park, No. 3370 Liuxian Avenue, Nanshan District, Shenzhen) hereby state that all the models are the same circuit and RF module, except the model name and shape. Signature:

Name: Peng Zhou Title: Product Manager Tel: 86-18827349723 Email: pzhou@gudsen.cn Date: 4.27.2022