|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6
|
Effective |
2024-02-03
|
|
1 2 3 4 5 6
|
2023-12-26
|
|
1 2 3 4 5 6
|
2023-11-26
|
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Shenzhen Hua Xin Information Technology Co., Ltd
|
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0026691238
|
|
1 2 3 4 5 6
|
Physical Address |
B101-B801, building 4, No.7 Industrial Area, Heshuikou Community, Matian Street
|
|
1 2 3 4 5 6
|
B101-B801, building 4, No.7 Industrial Area
|
|
1 2 3 4 5 6
|
Guangming District, Shenzhen, N/A
|
|
1 2 3 4 5 6
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6
|
TCB Application Email Address |
U******@SGS.COM
|
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6
|
Grantee Code |
2AMYQ
|
|
1 2 3 4 5 6
|
Equipment Product Code |
2023X2000
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6
|
Name |
S****** Z******
|
|
1 2 3 4 5 6
|
Telephone Number |
+86-1********
|
|
1 2 3 4 5 6
|
Fax Number |
0086-********
|
|
1 2 3 4 5 6
|
E-mail |
k******@szhtny.cn
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
|
1 2 3 4 5 6
|
Name |
K******** X******
|
|
1 2 3 4 5 6
|
Physical Address |
No.1 Workshop, M-10, Middle Section Science & Tech
|
|
1 2 3 4 5 6
|
No.1 Workshop, M-10, Middle Section
|
|
1 2 3 4 5 6
|
Shenzhen, 518057
|
|
1 2 3 4 5 6
|
China
|
|
1 2 3 4 5 6
|
Telephone Number |
+8675********
|
|
1 2 3 4 5 6
|
Fax Number |
N/A********
|
|
1 2 3 4 5 6
|
E-mail |
K******@sgs.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
|
1 2 3 4 5 6
|
Name |
K******** X******
|
|
1 2 3 4 5 6
|
Physical Address |
No.1 Workshop, M-10, Middle Section Science & Tech
|
|
1 2 3 4 5 6
|
No.1 Workshop, M-10, Middle Section
|
|
1 2 3 4 5 6
|
Shenzhen, 518057
|
|
1 2 3 4 5 6
|
China
|
|
1 2 3 4 5 6
|
Telephone Number |
+8675********
|
|
1 2 3 4 5 6
|
Fax Number |
N/A********
|
|
1 2 3 4 5 6
|
E-mail |
K******@sgs.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | No |
| 1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Robotic vacuum cleaner |
| 1 2 3 4 5 6 | Wireless LAN and Bluetooth Module |
| 1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-NM372SM Grant Date: 01/29/2021 |
| 1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | Yes |
| 1 2 3 4 5 6 | No |
| 1 2 3 4 5 6 | Grant Comments | Single modular approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Robotic vacuum cleaner), and updated the antenna type, from the original PIFA antenna (max. gain: 3.0dBi) to the FPC antenna (max. gain: 3.62dBi). Hardware/software parameters and conducted power will not change except for this antenna. Also, the host contains an additional 2.4G Wi-Fi module which has been certified. And the simultaneous transmitting has been evaluated in RF exposure report. |
| 1 2 3 4 5 6 | Single modular approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Robotic vacuum cleaner), and updated the antenna type, from the original PIFA antenna (max. gain: 3.0dBi) to the FPC antenna (max. gain: 3.62dBi). Hardware/software parameters and conducted power will not change except for this antenna. Also, the host contains an additional 2.4G Wi-Fi module which has been certified. And the simultaneous transmitting has been evaluated in RF exposure report. |
| 1 2 3 4 5 6 | Single modular approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Permissive change as specified under 47 CFR 2.1043 of the FCC rules to install the 2.4G Bluetooth & Wi-Fi Module (Model: AW-NM372SM, FCC ID: 2AMYQ-2023X2000, granted at 11/26/2023.) into the host (Model No.: X2000), and changed the antenna type, from the original PIFA antenna (Max gain: 3.0dBi) to the Integral antenna (Max gain: -2.40dBi). Also, the host product (Model No.:X2000) contains an additional 2.4G Wi-Fi Module which has been authorized under FCC ID: 2AC7Z-ESPWROOM02D, Granted at 11/13/2017. So Radiated Spurious Emissions and RF exposure evaluation for simultaneous transmitting were performed. |
| 1 2 3 4 5 6 | Single modular approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd. Sh
|
|
1 2 3 4 5 6
|
International Certification Corp.
|
|
1 2 3 4 5 6
|
Name |
K**** X****
|
|
1 2 3 4 5 6
|
F******** C******
|
|
1 2 3 4 5 6
|
Telephone Number |
+86 (********
|
|
1 2 3 4 5 6
|
886-3******** Extension:
|
|
1 2 3 4 5 6
|
Fax Number |
886-3********
|
|
1 2 3 4 5 6
|
E-mail |
K******@sgs.com
|
|
1 2 3 4 5 6
|
J******@icertifi.com.tw
|
|