Smartphone X70 CATALOGUE NOTE: IN VIEW OF THE MOBILE PHONE NETWORK CONFIGURATION AND THE SERVICES PROVIDED BY THE, SOME FEATURES MAY NOT BE ALLOWED TO USE, PLEASE CONTACT THE SELLER OR NETWORK OPERATING COMPANIES ...................................................... 3 CHAPTER 1 SAFETY AND MAINTENANCE .................. 3 CHAPTER 2 INSTALLATION AND CHARGING ............8 2.1 RECHARGE THE BATTERY ................................................... 8 2.2 SIM CARD INSTALLATION AND REMOVAL ........................... 9 2.3 MEMORY CARD TO INSTALL AND REMOVE ..........................9 2.4 HOW TO START UP AND SHUT DOWN ................................. 9 2.5 SECURITY CODE ................................................................ 10 2.5.1 PIN NUMBER .................................................................10 2.5.2 PUK NUMBER ............................................................... 10 CHAPTER 3 MOBILE PHONE KEY-PRESS FUNCTION 3.1 THE KEY DESCRIPTION ......................................................................11 CHAPTER 4 THE MAIN FUNCTION GUIDE ...................................12 4.1 DIAL PHONE ........................................................................ 12 4.2PEOPLE ................................................................................. 12 CHAPTER6 USING THE FUNCTION TABLE ..................13 CHAPTER7 COMMON PROBLEMS ..................................16 CHAPTER8 IMPORTANT SAFETY INFORMATION ...................... 19 8.1 THE USE OF THE ENVIRONMENT ....................................... 19 8.2 ELECTRONIC EQUIPMENT .................................................... 19 8.2.1 Pacemaker ....................................................................19 8.2.2 Hearing AIDS .............................................................. 20 8.2.3 Other medical equipment ............................................ 20 8.2.4 Cars ..............................................................................21 8.3 IS THERE A POSSIBILITY OF A DANGEROUS ENVIRONMENT .21 Preface Thank you for choosing our company mobile phone! Our mobile phone is in line with the communications industry standard of the People's Republic of China, also conforms to European standard Suitable for GSM network has been approved GSM network is a kind of international standard global cellular communication systemYour phone can access a variety of international networkAllows you to receive international callsLike in myself hometownBut when you use the Internet to provide these advanced features, you must first apply to buy the required services In order to better use your mobile phoneWe recommend that you read this manual carefullymake full use of various functions described in this manual Note: in view of the mobile phone network configuration and the services provided by the, some features may not be allowed to use, please contact the seller or network operating companies Chapter 1 safety and maintenance The use of mobile phones, please observe the following matters needing attention Before use, please read carefully the instructions When called for a ban on the use of mobile phones or the use of mobile phones can cause interference or danger, please don't boot up On the air, please always turn off the phoneIf your mobile phone set the alarm clock, calendar and so on has the function of automatic startup in shutdown conditionPlease check and cancel setup before boarding the plane Using the mobile phonestay away from heat sources, high voltage, the environment, such as electrical appliances or something hot cooking equipment Pay attention to the fireIn the gas stationwhen you close to the flammable liquids such as oil warehouse, please shutdown It is forbidden to hand-held mobile phone while driving Please don't mobile phones from the top of the balloon or balloons unfolds can hit areaIn order to avoid air expandsmay cause serious damage to you Can only use the approved by the company standard cells the charger and accessoriesFor any consequences resulting from using third-party accessories, the company does not undertake any responsibility Cell phone will cause interference to its close to other electronic equipmentPlease stay away from electronic equipmentFor example, the TVthe personal computer pacemakers and hearing AIDS and other equipmentIt is forbidden to put mobile phone near a credit card or magnetic fieldsIn a hospital or other special placesPlease follow rules related to special place to use your mobile phone It is strictly prohibited the use of mobile phones by mechanical vibration or shakingIt is strictly prohibited to use sharp tap on a screen Using mobile phones set it might damage the coating surface It is strictly prohibited without authorization remove the mobile phone It is forbidden to use solute such as benzenethinner or alcohol to wipe the phone's shellIt is forbidden to make your cell phone contact with corrosive chemicalsSuch as detergentCan only use a clean soft cloth gently wipe your phone It is forbidden to the phone in the sun exposureor place where dust or smoke too much Your phone is not waterproofPlease stay dryIt is forbidden to use in high humidity environmentSuch as the bathroomIt is forbidden to make its get wet in the rain, or be affected with damp be affected with damp When you put the charger to uproot from your phone or cut off the chargerPlease hold the interface and then pull out Do not pull the power cord Please don't just rely on mobile phones as a tool of emergency communicationsSuch as medical aid Please contact phone in children less than the safe placeIn order to avoid danger When using the batteryPlease follow the following matters needing attention:
Before use, please read carefully the instructions and battery surface marks Please in a cool, ventilated indoor to recharge the battery Otherwise the charge when the environment temperature is too highwill cause the battery heatsmoking, burn or deformation, and even explode Have a special protective circuit inside the battery and the deviceIt is strictly prohibited without authorization to open the batteryOtherwise it will cause a short circuit or electrolyte leakageIf the electrolyte into the eyes will there is a risk of blindnessThen rinse with water immediatelyDon't rub your eyesand immediately to the hospital It is forbidden to squeeze the batteryiIt is strictly prohibited to mechanical vibration or shaking the batteryIt is forbidden to make the battery short circuitBecause it will damage the battery or linked to the element Please keep the metal contact point and battery clean It is forbidden to use broken or has run out of battery Please replace the battery can't meet the performance requirementsThe battery can charge hundreds of timesuntil the need to replaceThe battery is consumableAlthough it can charge and discharge hundreds of timesBut its power will slowly decreaseWhen you find timeThe talk and standby time reducedShould change a new battery It is forbidden to expose the battery to the sunor too much smoke or dustIt is forbidden to use in high humidity environmentSuch as the bathroomThe device is not waterproofIt is forbidden to make it in the rain or be affected with damp be affected with damp It is forbidden to place the battery in hot or too cold Temperatures above 50 or below - 10 environment will affect battery performance It is forbidden to throw the battery into the fire, so as to avoid explosion It is forbidden to put battery in the waterLest cause internal short circuitCause the battery heatsmoking deformationeven the explosion Please handle the battery in accordance with the regulations Such as recyclingnot to battery as life garbage disposal lest cause explosion and pollution The battery can only use a dedicated chargerIt is strictly prohibited and continuous charging more than 12 hours Please put battery in children are not exposed to the safe placeIn case of danger Chapter 2 Installation and charging 2.1 Recharge the battery The charger plugged inthen insert the charger interface phone charger socket NotesPlease be careful operationDon't force out charging interfacethat this might damage the mobile phone or charger Your phone comes with the battery must be fully charged before use When charging please do not remove the battery or SIM card If the battery run out, the phone automatically shut down 2.2 SIM card installation and Removal Pull out the left side of the mobile phone SIM card, the SIM card into the SIM card slot, insert the SIM card, make sure the metal facing down;When you need to remove the SIM card, with a thimble into the hole, pull out the SIM card 2.3 Memory card to install and remove Memory card to install Pull out the bottom of the SD card, make sure you insert the SD card face-down metal Memory card to remove With a thimble into the hole, remove the SD card connector, SD card out;
2.4 How to start up and shut down Ensure that the battery has been installedBoot, hold the "power key" buttonUntil the screen appear on screenSome of the SIM card PIN protectionIf you have input PINEnter your PIN numberPIN number password is commonly 1234 PIN 2.5 Security code You can use this section describes the access password to prevent unauthorized use your SIM card 2.5.1 PIN number To prevent user SIM card is illegal usIf your phone has started the PIN protection functionAfter startup, the screen will display input PINIf three consecutive input the wrong PIN numberSIM card will be automatically lockedYou must enter the PUK code to unlockPIN code associated with the SIM cardand has nothing to do with the phonePIN number provided by the network operator 2.5.2 PUK number PUK code is unlock codeUsed as unlock for three consecutive error input PIN lock the SIM cardIf the total input wrong PUK code 10 timesSIM card will failPIN number provided by the network operator Chapter 3 Mobile phone key-press function 3.1 The key description key description Short press, when the phone is switched on phone to sleepLong press, then brings up a menu of Power key shutdown To turn it off when short according to no response Long press on Menu key Can pop up in the options menu Home key The standby interface short according to return to the standby interface Back key Return to a layer interface volume button key Adjust the volume Chapter 4 The main function guide 4.1 Dial phone When the network supplier logo appears on the screen You can dial or answer the phoneDisplay the network signal strength information display in the top right corner of the barCall quality is affected by obstacles is largerSo in a small range of mobile voice quality can be effectively improved Domestic calls Enter the phone number under standby modethen press the dial-up icon to callAfter each other on screen will display status informationEnd please click end icon hang up the phone cal NotesWhen you can make a call, the button long press on the headset to hang up the phone, short press to keep calling 4.2People You can use the address book function to store contact information NotesSIM card number stored records related to its capacity Chapter 5 Iiput text The phone has to provide you with input methodYou can download other input method to install and use In the feature is allowed to enter in the cell phone InputEdit short messages InputEdit directory name Input method After selecting the input methodYou can according to the input method icon click switch input mode of the interface According to the need to enter Numbers/Chinese/sign/letters You can install other input method on its own Chapter6 Using the function table Mune Brief description SIM card application SIM card tools management, the service provided by the operator WLAN Setting Enter the clock in WLAN function and can search the wireless network Dial telephone contact; Click on the Dial TAB icon to switch to the phone records, the address book interface E-mail Used to send and receive email Calculator Used in scientific computing Find phone contacts, click the TAB Contact icon to switch to the group, the collection interface Browser Support to browse the web, etc Recording Can record music or other sounds Calendar Setting This function can be convenient for you at any time to check the date You can set different functions in the cell phone Clock You can set the alarm clock, timer, stopwatch Recovery and backup To backup your personal data to memory card, can also recover personal data from the memory card Search Input content can search function Photos After entering can look at the pictures and video File management Check the cell phone store and content stored in the SD card Download contents Check the machine current download the resource files, etc Camera Message After entering can take photos and video, and so on Can perform the function of sending short messages and MMS Music Play MP3 music files, etc FM Insert the headset can receive FM radio Chapter7 Common problems Any problems in the process of using mobile phonesPlease refer to the following terms and conditionsIf the problem still existsPlease contact the dealer or up immediately Screen appears input PIN number Input a SIM card with the valid PIN codeIf you don't know the passwordPlease immediately contact the service provider Screen appears input PUK number After input the wrong PIN number three timesYour SIM card will be lockedwant to unlockYou must enter the PUK codePlease immediately contact the Internet service providers Insert SIM card information screen appears Confirm the SIM card is installed correctlyCheck the SIM card is working correctlyIt may have a defect or malfunctionIf so, please deliver the Internet service providers to solve Display is not in service, network fault Check the signal strength indicatorIf there is no network signalyou may be in the basement or blind spot of network buildingPlease move to other areas received signalThere is another situationYou may be in the network coverageCan ask your network service provider to provide network services Voice quality is poorEcho or noise make it difficult to talk Hang up and dial againInternet service providers may transfer a call quality better routes for you Standby time shorter Local weak signalMobile phone search for signal caused by long timeWhen you don't want to answer the phone, please temporarily shut downor the battery use time is too long close to the battery lifeplease replace the new battery at this time Mobile phones can't boot up Check the battery or chargeDuring charging, the open mobile phone testAfter phone if let stand for a long time easy to make a battery of excessive dischargeAt this time unable to boot, charging can't response began a long timewant to wait after power recovery to boot Can't send short messages Would you like to check your service center number option See if you have set the SMS center number or number error you may not have opened the SMS service, or short message send object is invalid, or does not support the service area network operators Can't charge There are three possibilities: one is the mobile phone charger bad workThe second is the environment temperature is not appropriateThird, poor contact The address book can't add the data Can view the address book storage is full, can delete some useless original entry Don't choose certain functions Without opening the service or the local network provider does not support this servicePlease contact us and specify up, dealers or network operators Chapter8 Important safety information 8.1 The use of the environment No matter in any place shall comply with the specific rules and regulationsWhere it is prohibited to use mobile phone or mobile phone may cause interference or danger, be sure to turn off the phoneIn order to satisfactorily used equipment, please use a mobile phone on the normal operating position Due to certain parts of the cell phone has a magneticPlease do not make a credit card or other magnetic storage medium near the phoneavoid to delete the stored information 8.2 Electronic equipment Some electronic devices can't be shielding wireless phone RF signal 8.2.1 Pacemaker Pacemaker manufacturers recommend the distance between mobile phones and cardiac pacemaker to keep at least 20 cm
(6 inches)To avoid the pacemaker of potential interference on the phoneThese Suggestions and radio technology research institute of independent studyThis is their proposal Wearing a pacemaker When the phone was onMust keep the cell phone from the pacemaker at least 20 cm (6 inches) Should not carry mobile phones in the breast pocket Should use pacemaker answer on the other side of the earTo minish the possible interference to a minimum If you suspected interference, should immediately turn off the phone 8.2.2 Hearing AIDS Some digital wireless phones interfere with some hearing AIDSIf there is interference, please consult your service supplier 8.2.3 Other medical equipment Of any radio transmitting equipment (including mobile phones) operation may be causing interference to the function of improper protection of medical equipmentIn any places close mobile hospital or health care stated requirements, please turn off the phone 8.2.4 Cars RF signal may affect improperly installed in motor vehicles or not completely block the electron system 8.3 Is there a possibility of a dangerous environment Turn off the phone in the dangerous placesAnd comply with all instructions of text and graphicsSparks were emitted from in these places may cause fire or explosioncause body injury and even death Suggest user turn off the phone at gas stationsRemind users need to be in terminal (fuel storage and distribution area) chemical plants or ongoing blasting site comply with radio equipment use restrictions may be dangerous places often clearly the security tagThese places including ship below deck, chemicals, transport or storage facilities, use liquefied petroleum gas vehicles (such as propane and butane), contain chemicals or particles in the air, such as grain, dust or metal powder) sites, etc FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAR Information Statement Your Smartphone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for Smartphone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use on the head is 0.78 W/Kg and when worn on the body, as described in this user guide, is 0.79 W/Kg
(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.84 W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AHZ5X70 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR test distance is 10mm. A. Safety measures for users and non-users Non-use of the device in certain situations (while driving) and certain places (airplanes, hospitals, gas stations and professional garages). Precautions to be taken by wearers of electronic implants
(pacemakers. insulin pumps. neurostimulators, etc.) concerning in particular the distance between the device and the implant (15 centimeters) and the position of the device. During the call on the side opposite the implant. B. Advice for use to reduce the level of consumer exposure to radiation (e.g. Keep the device away from the human body during night rest or set it to flight mode, etc.). Recommendation of the use of the device in good reception conditions, to reduce the amount of radiation received (especially in an underground car park when travelling by train or car...). Indication of the parameters for good reception (e.g. display of four or five bars on the screen). Recommendation to use a hands-free kit and, in this situation. Precautions to be taken when Communicating: keep the device away from the abdomen for pregnant women or from the lower abdomen for teenagers. CE Statement Herby, Shenzhen Huafurui Technology Co., Ltd declares that this SmartphoneX70 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this produ ct allowed to be used in all EU member states. Use the Smartphone in the environment with the temperature between 0 and 40 Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The product shall only be connected to a USB interface of version USB2.0 SAR: The device complies with RF specifications when the device used at 5mm from your body. The highest SAR value for this device when tested for use on the head is 0.64 W/Kg and when worn on the body is 0.92 W/Kg, tested for Front-to-face is 0.33Kg, for Limbs is 1.61Kg 5150-5250 indoor use only. Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter Adapter Model: HJ-FC018K7-EU Input: AC 100-240V, 50/60Hz, 0.6A Output: DC 5.0V, 2.0A/ DC 7.0V, 2.0A/ DC 9.0V, 2.0A, 18.0W Operation Frequency:
For BT/BLE: 2402MHz~2480MHz For 2.4G WIFI:
2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) 2422MHz~2462MHz (802.11n(HT40)) For 5G WIFI:
5150MHz~5250MHz, 5725MHz~5875MHz For GNSS:
GPS: 1.57542GHz BDS: 1.561098GHz GLONASS: 1.602GHz Galileo: 1.561098 GHz For NFC: 13.56MHz For GSM:
E-GSM 900/GPRS 900/EGPRS 900:
TX: 880MHz~915MHz; RX: 925MHz~960MHz GSM 1800/GPRS 1800/EGPRS 1800:
TX: 1710MHz~1785MHz; RX: 1805MHz~1880MHz For WCDMA:
UTRA Band I: TX:1920MHz~1980MHz;
RX: 2110MHz~2170MHz UTRA Band VIII: TX: 880MHz~915MHz;
RX: 925MHz~960MHz For LTE:
LTE Band 1: (UL)1920MHz~1980MHz,
(DL)2110MHz~2170MHz LTE Band 3: (UL)1710MHz~1785MHz,
(DL)1805MHz~1880MHz LTE Band 7: (UL)2500MHz~2570MHz,
(DL)2620MHz~2690MHz LTE Band 8: (UL)880MHz~915MHz,
(DL)925MHz~960MHz LTE Band 20: (UL)832MHz~862MHz,
(DL)791MHz~821MHz LTE Band 28: (UL)703MHz~748MHz,
(DL)758MHz~803MHz LTE Band 38: (UL)2570MHz~2620MHz,
(DL)2570MHz~2620MHz LTE Band 40: (UL)2300MHz~2400MHz,
(DL)2300MHz~2400MHz Max output power:
BT: 0.0031W BLE: 0.0006W 2.4G WIFI: 0.0482W 5G WIFI: 0.0216W E-GSM 900/GPRS 900/EGPRS 900: 2.1184W GSM 1800/GPRS 1800/EGPRS 1800: 1.122W UTRA Band I: 0.2168W UTRA Band VIII: 0.2249W LTE Band 1: 0.2679W LTE Band 3: 0.2685W LTE Band 7: 0.2432W LTE Band 8: 0.2344W LTE Band 20: 0.2449W LTE Band 28: 0.2355W LTE Band 38: 0.2748W LTE Band 40: 0.2679W ManufacturerShenzhen Huafurui Technology Co., Ltd AddressUnit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China E-mail: support @cubot.net Declaration of Conformity I hereby declare that the product Product:
Product Name: Smartphone Model: X70 Brand Name: CUBOT Hardware Version: M118-MUB-V2 Software Version: CUBOT_X70_D061_EEA_V04 Accessories USB Cable Information:
Model: 407-0000-JHTYW Length: 1m Manufacturer: SHENZHEN GYHONTEN ELECTRONICS CO., Ltd Battery information:
Model: C39 Specification: 3.87V, 5200mAh, 20.124Wh Manufacturer: Shenzhenshi Jiuliyuan electronic technology co., LTD Adapter Information:
Model: HJ-FC018K7-EU Input: AC 100-240V, 50/60Hz, 0.6A Output: DC 5.0V, 2.0A/ DC 7.0V, 2.0A/ DC 9.0V, 2.0A, 18.0W Manufacturer: Shenzhen Huajin Electronics Co.,Ltd Earphones Information Model: 408-B021-11000 Voice Coil IMP: 3215%
Sensitivity: 103.67dB 3dB at 1KHz Input Power: 5mW Manufacturer:
Shenzhen Xin Cheng Yuteng Optoelectronic Co.,Ltd
(Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/35/EU, 2014/30/EU and 2014/53/EU:
EN IEC 62368-1:2020+A11:2020 EN 50566:2017 EN 50663:2017 EN IEC/IEEE 62209-1528:2021 EN 50360:2017 EN 62479:2010 ETSI EN 301 489-52 V1.2.1 (2021-11) ETSI EN 301 489-19 V2.2.1 (2022-09) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 301 489-3 V2.3.2 (2023-01) ETSI EN 301 489-1 V2.2.3 (2019-11) EN 55032:2015+A11:2020+A1:2020 EN 55035:2017+A11:2020 EN IEC 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019+A2:2021 ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) ETSI EN 303 413 V1.2.1 (2021-04) ETSI EN 300 330 V2.1.1 (2017-02) ETSI EN 301 511 V12.5.1 (2017-03) ETSI EN 301 908-1 V15.2.1 (2023-01) ETSI EN 301 908-2 V13.1.1 (2020-06) ETSI EN 301 908-13 V13.2.1 (2022-02) EN IEC 62311:2020
(Title(s) of regulations, standards, etc.) All essential radio test suites have been carried out. NOTIFIED BODY: PHOENIX TEST-LAB GmbH Address:
Kningswinkel 10 D-32825 Blomberg Germany Identification Number: 0700 MANUFACTURER or AUTHORISED REPRESENTATIVE:
Address:
Shenzhen Huafurui Technology Co., Ltd Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Signature:
Jun. 02, 2023 Name Bianca.Lei Position Manager Company Name Shenzhen Huafurui Technology Co., Ltd Address Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan Street, Nanshan District, Shenzhen, P.R. China Tel / Fax
+860755-83821787/+860755-23612065 E-Mail support @cubot.net