Smart Host Pro MODELH201-ST-SH00 Directory 1. Product introduction 2. Product list 3. Installation guide 4. Configure wi-fi 5. Product parameters 6. Matters needing attention 7. Technical support product introduction ZigBee HA wireless communication protocol is adopted, equipped with the global universal channel 2.4ghz, to achieve 10ms quick response.Crystal glass material, with 3.5-inch IPS display.Independent and distributed compatible multi-attribute intelligent host, one APP client can correspond to multiple intelligent hosts. Product list Before using this product, please check whether the goods in the package are complete, if there is a lack, please contact the after-sales center. 1 x products 1X product manual 1X product warranty card 1 x certificate 2 x screw Installation guide (drawing sketch) 1. This product is divided into two parts: a. B. Screw plate. 2. Fix the screw plate b on the type 86 universal bottom box with 2 screws. 3. Correctly connect the power line and network line according to the wiring marking of the bottom box of the host.Note: make sure the power is off 4, install the main body a into the screw plate b, that is, the installation is completed. Configure Wi-Fi 1. Click "
" to enter the setting interface. 2. Click "WiFi" to select the corresponding network, and then enter the wi-fi password, and the network will be successfully configured instantly. product parameters Product size: 96*86*35 (mm) Power supply: AC 100 ~ 240v power supply 50/60hz Communication protocol: ZigBee HA Wireless standard: IEEE 802.15.4 (2.4ghz) Communication rate: 250Kbps Standby power: 3W Working humidity: 5~85% no condensation Working temperature: - 10 , 50 Transmission distance: 100M (open environment) Connection mode: zero - wire Matters needing attention 1Before installation, the product should be stored in a dustproof, moisture-proof and mildew-proof environment. 2. Slight fever occurs during the use of this product, which is a normal phenomenon. 3. Please handle the product with care during installation to avoid scratching and damaging the surface of the product and affecting the appearance. 4. Remember, live installation is prohibited. Technical support 1Shenzhen Hwellyi Technology Co. , Ltdwith retained ownership 2The contents of this document shall be provided according to the manufacturing status of the product. If there is any update, no further notice will be given. 3If you need to know more about the product and update information, please visit the official website of the productwww.hwellyi.com 4For consultation, please call the service hotline of hua yi400-0085-365 official WeChat IDHWELLYI FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.