DUOSmart Turntable Audio Station Instruction English Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Head all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus that produce heat. 9 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 10 Only use attachments/accessories specified by the manufacturer. 11 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally , or has been dropped. 12 Unplug this apparatus during lighting storms or when unused for long periods of time. 13 To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 14 Do not place naked flame sources, such as lighted candles, on the apparatus. Warning To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids , such as vases, shall not be placed on the apparatus. Notes This product has been tested with level adjustment before leaving the factory and it is recommend ed to be placed on the leveled table for usage. Only available for an altitude no more than 2,000 meters. Only available for non-tropical climatic conditions. Part List Turntable Bluetooth Speaker Turntable Cover Holder Stylus Cover Interface Guide Voice assistant Bluetooth Volume up Volume down Power ON/OFF Bluetooth Speaker Part Description Speed Switch Turntable Bluetooth Speaker Speed 45 rpm Speed 33 rpm Standby OFF 45 33 Bluetooth Pairing Button Indicate Light Turntable Holder Turntable Cover Tonearm Cartridge Stylus Cover Platter Mat Platter 12V Charge Port MicroUsb Charge Port 12V Charge Port 1 Vinyl Mode Start playing 45 33 1 2 3 4 5 6 7 Plug in the power line, turn the Speed Switch to the Standby mode Press the Power ON/OFF button for 3 seconds on the Bluetooth Speaker, the speaker will pair the turntable automatically Move the Tonearm from the holder gently, and take out the holder Put the vinyl record on the turntable, take off the stylus cover, put the holder on the vinyl record gently Turn the Speed Switch to proper speed (33 rpm or 45 rpm) Put the Tonearm on the vinyl edge Start playing If pairing failed, press the bluetooth pairing button on the turntable for 3 seconds 1 Vinyl Mode Stop playing 45 33 1 2 3 Turn the Speed Switch to Standby After the Vinyl stops moving, move the tonearm to the tonearm stand gently, and move the holder from the platter gently After the vinyl is removed, put the holder back to the slot on the turntable 4 Reset the tonearm on the holder 2 Bluetooth Mode 1 2 3 4 5 After the turntable is switched off, press the bluetooth button on the speaker for 3 seconds Turn on the bluetooth on the smartphone Choose HYM-DUO to pairing Pairing completed Choose music to play If pairing failed, press the bluetooth pairing button on the speaker for 3 seconds 3 Stereo Pairing Mode 1 2 3 4 5 After the turntable is switched off, press the bluetooth button on the speaker Press the Bluetooth pairing button of both A and B Bluetooth speakers for 3s After 2 speakers connected successfully, Speaker A willactively re-connect the smartphone or the turntable Pairing completed Choose music to play If pairing failed, press the bluetooth pairing button on the speaker for 3 seconds A Speaker B Speaker 4 Turntable With Other Bluetooth Device 45 33 1 2 3 4 Light color will be flash white Plug in the power line, Turn the speed button to standby mode Turn on the bluetooth device, waiting for connection Pairing completed Light color will be solid white Start playing vinyl 5 Light Indication 45 33 Status Bluetooth Pairing Pairing completed Light color on turntable Flashing white Solid white Status Bluetooth Pairing 2-Speaker pairing Pairing completed Low battery Charging Light color on speaker Flashing green Breathing green Solid green Solid orange Breathing white
*5 hours needed for full charge FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. ISED Statement English: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES3 (B)/NMB3(B). French: Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi olectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numrique du ciem conforme canadien peut 3 (b) / nmb 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. DUOSmart Turntable Audio Station Designed by HYM