FCC ID: 2AYA5-XMZ01 Wireless charging of bracket

Smart Wireless Car Charger Manual Instructions Air vent clip fixing method 1.Loosen the air vent clip nut, and insert the clip into the air conditioner blade 2.Rotate and tighten the Air vent clip nut Product Introduction Thank you for ordering this device. It is a smart wireless car charging phone holder, supports scanning and auto-tracking coils to charging different brands smartphones. Make you easily experience the fun of wireless smart digital products. Please read this manual carefully before operating this device and keep it for future reference. Product structure diagram 3.Insert the Type-c data cable to the port, the clamp arms will automatically open. 4.Place the phone on the holder, the arm will auto close and lock, and then auto-scanning the coil and charging Product parameters Input:

Power:

Receiving distance:

Product weight: Bare metal 182g With clip 205g NOTE:

* Keep out of reach of children.

* Do not use under wet conditions.

* Please do not make any change to the product by yourself.

* Please avoid a strong collision of the product.

* Do not disassemble and repair the product if you are not a professional.

* Do not use external force to move the clamp arm.

* The product needs to be equipped with QC2.0/QC3.0 and other formally certified car chargers to fit.

* The product uses the principle of wireless charging and capacitive sensing to make charging more convenient.

* The product has a built-in battery. Please touch the button to open the clip arm after charging for 5 minutes and disconnecting the power. Installation steps 1.Please put the rotary ball of the car phone holder into the fixing nut first;

2.Then press the rotary ball and nut into the car phone holder;

3.Finally, tighten the nut according to individual needs. Electric clamp arm, please don't take out the phone forcibly by hand Touch the button on the top of the car holder when necessary, the clamp arms will automatically open Memory function: after the first coil alignment, it will charge immediately if place the same phone on the device 1.Movable alignment wireless sensing area 2.Work indicator 3.Touch button 4.Type-C interface 5.Car air vent clip 6.Multi angle rotating ball 7.Fixing nut 8.Air vent clip nut 9.Air vent clip support The product has a foreign body detection function. It will affect the wireless charging usage if equipped with ring holders, metal objects, or other stuff that increases the phone thickness. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is measures:

connected. Consult the dealer or an experienced radio/TV technician for help.

Shenzhen ICHECKEY Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/11/30 SUBJECT: FCC Application for (FCC ID: 2AYA5-XMZ01) To Whom It May Concern:

We, the undersigned, hereby authorize Alisa Feng in Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section.

(Must be signed by the person that is listed on the FCC Website) Sincerely, Signature:

Contact name: Huolin. Xie Company name: Shenzhen ICHECKEY Technology Co.,Ltd. Address: B302,Building 4,TianYanXuan,No.1 Lane14,Bantian East Village,Bantian Street,LongGang District, Shenzhen China 518000 Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Authorization v02 Page 1 of 1

Shenzhen ICHECKEY Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AYA5-XMZ01 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type 1. Block Diagram, 2. Schematics, 3. Operational Description File Name 1. 2AYA5-XMZ01 -Block diagram 2. 2AYA5-XMZ01 -SCH 3. 2AYA5-XMZ01 -Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of xxxx (ie- 45, 90 or 180) days:

Exhibit Type N/A File Name N/A Signature:

Contact name: Huolin. Xie Company name: Shenzhen ICHECKEY Technology Co.,Ltd. Address: B302,Building 4,TianYanXuan,No.1 Lane14,Bantian East Village,Bantian Street,LongGang District, Shenzhen China 518000 Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Confidentiality v02 Page 1 of 1