FCC ID: 2A2T9-BCST46 Barcode scanner

Battery Safety Warning:

Advertencia de seguridad de la batera:

This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects. Batteriesicherheitshinweis:

Dieses Produkt enthlt einen eingebauten wiederaufladbaren Lithium-Akku. Bitte beachten Sie die folgenden Sicherheitsvorkehrungen: Zerlegen Sie den Akku nicht, schlagen Sie ihn nicht, zerquetschen Sie ihn nicht und setzen Sie ihn nicht Feuer aus. Bei starkem Aufblhen des Akkus verwenden Sie ihn bitte sofort nicht mehr. Vermeiden Sie es, den Akku in heien Umgebungen zu platzieren, und verwenden Sie ihn nicht, wenn er in Wasser getaucht wurde. Mischen Sie den Akku whrend des Transports nicht mit metallischen Gegenstnden. Avertissement de scurit de la batterie:

Ce produit contient une batterie lithium-ion rechargeable intgre. Veuillez observer les prcautions de scurit suivantes : ne pas dmonter, frapper, craser ou exposer la batterie au feu. En cas de gonflement important de la batterie, cessez immdiatement toute utilisation. vitez de placer la batterie dans des environnements haute temprature et ne l'utilisez pas si elle a t immerge dans l'eau. Pendant le transport, ne mlangez pas la batterie avec des objets mtalliques. Avviso di sicurezza della batteria:

Questo prodotto contiene una batteria al litio ricaricabile incorporata. Si prega di osservare le seguenti precauzioni di sicurezza: non smontare, colpire, schiacciare o esporre la batteria al fuoco. Se la batteria presenta un grave rigonfiamento, interromperne immediatamente l'uso. Evitare di posizionare la batteria in ambienti ad alta temperatura e non utilizzarla se stata immersa nell'acqua. Durante il trasporto, non mescolare la batteria con oggetti metallici. Este producto contiene una batera de litio recargable incorporada. Por favor, observe las siguientes precauciones de seguridad: no desmonte, golpee, aplaste o exponga la batera al fuego. Si la batera experimenta hinchazn severa, interrumpa su uso inmediatamente. Evite colocar la batera en ambientes de alta temperatura y no la utilice si ha estado sumergida en agua. Durante el transporte, no mezcle la batera con objetos metlicos. Ostrzeenie dotyczce bezpieczestwa baterii:

Ten produkt zawiera wbudowany akumulator litowy. Przestrzegaj nastpujcych rodkw ostronoci: nie demontuj, nie uderzaj, nie miad ani nie naraaj baterii na dziaanie ognia. Jeli bateria ulegnie znacznemu obrzkowi, natychmiast przerwij jej uywanie. Unikaj umieszczania baterii w wysokotemperaturowym rodowisku i nie uywaj jej, jeli bya zanurzona w wodzie. Podczas transportu nie mieszaj baterii z metalowymi przedmiotami. Ostrzeenie dotyczce bezpieczestwa baterii:

Ten produkt zawiera wbudowany akumulator litowy. Przestrzegaj nastpujcych rodkw ostronoci: nie demontuj, nie uderzaj, nie miad ani nie naraaj baterii na dziaanie ognia. Jeli bateria ulegnie znacznemu obrzkowi, natychmiast przerwij jej uywanie. Unikaj umieszczania baterii w wysokotemperaturowym rodowisku i nie uywaj jej, jeli bya zanurzona w wodzie. Podczas transportu nie mieszaj baterii z metalowymi przedmiotami.

, . Batterijveiligheidswaarschuwing:

Dit product bevat een ingebouwde oplaadbare lithiumbatterij. Neem de volgende veiligheidsmaatregelen in acht: demonteer, sla, verpletter of stel de batterij niet bloot aan vuur. Als de batterij ernstig opzwelt, stop dan onmiddellijk met het gebruik ervan. Vermijd het plaatsen van de batterij in omgevingen met hoge temperaturen en gebruik deze niet als deze in water is ondergedompeld geweest. Meng de batterij tijdens het transport niet met metalen voorwerpen. Varningsmeddelande om batteriskerhet:

Denna produkt innehller ett inbyggt uppladdningsbart litiumbatteri. Observera fljande skerhetsfreskrifter: demontera, sl, krossa eller utstt inte batteriet fr eld. Om batteriet svller kraftigt, sluta anvnda det omedelbart. Undvik att placera batteriet i hgtemperaturmiljer och anvnd det inte om det har varit nedsnkt i vatten. Under transport, blanda inte batteriet med metallfreml. FCC Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. EU Declaration of Conformity Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU . A copy of the Declaration of Conformity can be accessed from https://www. inateck.de/pages/inateck-euro-compliance. FR Service Center Europe F&M Technology GmbH Tel: +49 341 5199 8410 (Working day 8 AM - 4 PM CET) Fax: +49 341 5199 8413 Address: Fraunhoferstrae 7, 04178 Leipzig, Deutschland North America Inateck Technology Inc. Tel: +1 (909) 698 7018 (Working day 9 AM - 5 PM PST) Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

Inateck

+81 06 7500 3304 547-0014 3 10 11 Manufacturer Shenzhen Inateck Technology Co., Ltd. Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China Email: [email protected] Postal code: 518129 For Product and Battery F&M Technology GmbH Fraunhoferstrae 7, 04178 Leipzig, Deutschland Tel: +49 341 5199 8410 Email: [email protected] Postal code: 04178 Inateck Technology (UK) Ltd. 95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL Tel: +44 20 3239 9869

Shenzhen Inateck Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Inateck Technology Co., Ltd. Address:Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China Product Name: Barcode scanner FCC ID:2A2T9-BCST-46 Model(s): BCST-46 2.911(d)(5)(i) Equipment Type We, Shenzhen Inateck Technology Co., Ltd. (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Fret Huang Date: 2024.12.16 Title and Company name:Manager/Shenzhen Inateck Technology Co., Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Inateck Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Shenzhen Inateck Technology Co., Ltd. Address:Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China Product Name: Barcode scanner FCC ID:2A2T9-BCST-46 Model(s): BCST-46 2.911(d)(5)(ii) Applicant filing We, Shenzhen Inateck Technology Co., Ltd. (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Fret Huang Date: 2024.12.16 Title and Company name:Manager/Shenzhen Inateck Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Shenzhen Inateck Technology Co., Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Inateck Technology Co., Ltd. Address: Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China. Product Name: Barcode scanner FCC ID:2A2T9-BCST-46 Model(s): BCST-46 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Inateck Technology Co., Ltd.] (the applicant) designate [REPAmerica LLC

] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: REP America LLC USA Address: 350 Terry St. 200 Longmont, CO 80501 United States FRN Number:0034192500 Contact Name:Mr. Ben Xu Telephone No:7192013314 Email:[email protected] Company name: Shenzhen Inateck Technology Co., Ltd. Address: Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China. Grantee FRN Number: 0031248057 FCC Grantee Code: 2A2T9 Contact Name: Fret Huang Telephone No: 0755-23484029 Email: [email protected] 2.911 (d)(7)USA Agent v1.5 Shenzhen Inateck Technology Co., Ltd. Signature:

Title:

Date:

Signature:

Title: Manager Date:2024.12.16 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Shenzhen Inateck Technology Co., Ltd. Agent Authorization Company:Shenzhen Inateck Technology Co., Ltd. Address:Rm. 2507, Bldg. 11, TianAn Cloud Park, Bantian Street, Longgang District, Shenzhen, China Product Name:Barcode scanner Model Number(s):BCST-46 Product Description:Barcode scanner We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Fret Huang Title:

Manager Company: Shenzhen Inateck Technology Co., Ltd. Date: 2024.12.16

Shenzhen Inateck Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:2A2T9-BCST-46 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2024.12.16 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Fret Huang Title:Manager