H7101 1.0 2021/11/25 145210mm 290X210(mm) 80G 32 Model: H7101 User Manual Govee Smart Tower Fan Contents Safety Instructions General Safety Power Cord & Plug Risk of Electric Shock & Leakage Included in the Box Introduction Part Names Controls Indicator Status Functions Getting Started Govee Home App Downloading Govee Home App Pairing with Govee Home App Care & Maintenance Cleaning Maintenance Troubleshooting For Govee Smart Tower Fan For App & Connectivity Appendix After-Sales Service Specications Compliance Information 01 02 03 06 07 08 09 11 READ AND SAVE THESE INSTRUCTIONS Safety Instructions General Safety Only use the fan as described in this manual. To reduce the risk of re or electric shock, do not use this fan with any solid-state speed control device. Do not operate this fan if it has been damaged. Supervision is required during the installation, operation, cleaning, and maintenance of this fan by children under age 12 or anyone with reduced physical, sensory, or mental capabilities. Children should be supervised to ensure that they do not play with the fan, Do not insert ngers or foreign objects in any opening of the fan and do not obstruct the its parts and packaging material. air vents. Do not place this fan near any fabric such as curtains, and tablecloths as they might be sucked into the fan and damage the motor and/or cause a re. Do not place any part of this fan (the whole machine, power cord, plug, packaging, etc) near high-temperature heat resources such as hearth, replaces, and stoves. Do not use this fan on windows, uneven or unstable surfaces, or near water. Do not immerse the fan in water and never allow water to drip into the motor housing. Unplug this fan from power if it is being moved, repaired, cleaned, used during a thunderstorm, left unattended for a long time or not in use. Do not use gasoline, paint thinner or other chemicals to clean the fan. CAUTION: This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the fan from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the fan. If the replacement fuse blows, a short-circuit may be present and the fan should be discarded or returned to an authorized service facility for examination and/or repair. Power Cord & Plug This fan has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to defeat this safety feature. Never use the cord as a handle or otherwise yank, strain or stretch the power cord. Place the fan near the plug so that it can be unplugged immediately from the power if an emergency occurs. 01 Do not operate this fan with a damaged cord or plug. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from trac If the power cord or the plug is damaged, please contact customer service for repair or similar area and where it will not be tripped over. professionals to avoid danger. Risk of Electric Shock & Leakage Ensure that all parts of the whole machine have been installed before using, including the front guard, fan blades, and the rear guard. Do not insert any foreign objects in the air inlet or outlet when the fan is powered on, as this may damage the fan itself, cause electric shock or re. If any part of the fan is damaged in operation, contact customer service or professionals for repair or replacement. Do not risk repairing or replacing by yourself. WARNING: To reduce the risk of electric shock, do not expose the fan to water or rain. Included in the Box Item Tower Fan Base Plates Screw Nut User Manual Quick Start Guide Quantity 1 2 1 1 1 (pre-installed) 02 Introduction Govee Smart Tower Fan circulates cool air or warmth from your oor to the whole room, meeting all your needs with variable speed control. Part Names a. Control Panel b. Air Outlet c. Front Base Plate d. Rear Base Plate e. Power Cord f. Power Plug g. Screw Nut h. Built-in Handle i. Air Inlet j. Wind Wheel a b h i j g 03 c d e f Controls Power Button Touch to power on or o. Oscillation Button Touch to start or stop the oscillation. Note: Press and hold the Power Button and Speed Button for 10 seconds to restore the fan to factory settings and disconnect it from Wi-Fi and Bluetooth. Mode Button Touch to cycle through Normal Mode, Nature Mode, and Sleep Mode. Normal Mode: Always operates at the current speed. Nature Mode: Simulates a gentle breeze, making you feel like you're in nature. Sleep Mode: Decreases the speed progressively until it reaches the lowest speed, continuously running to lull you to sleep. Timer Button Touch to set a timer. Speed Button Lock on or o. Touch to cycle through High Speed , Medium Speed , and Low Speed . Note: Press and hold the Timer Button and Speed Button for 3 seconds to turn the Safety 04 Indicator Status Indicator Working Status Safety Lock is ON Solid White / Flash Low Speed Medium Speed High Speed Touch to Set a Timer Set a Timer via the App Normal Mode Nature Mode Sleep Mode Connected Connecting Light Status Solid White Solid White Solid White Solid White Solid White Solid White Solid White Solid White Solid White Quickly Flashes White Functions Memory Function again when the fan is turned back on. Safety Lock The fan will remember its previous settings when powered o. The settings will become active Press and hold the Timer Button and Speed Button to turn the safety lock on or o. 05 Getting Started Do not plug your fan into power before nishing the following steps:
1.Place the fan body on a dry, level surface. 2.Assemble the front base plate and the 3.Pass the power cord through the hole of the rear base plate together as a whole. base plate, and fasten the base plate with the fan body. 4.Pass the power cord through the hole 5.Fix the power cord into the buckle of the base of the screw nut and tighten the screw plate and place the fan properly on a level surface. with the base plate. 06 Govee Home App You can access more features using Govee Home App. Downloading Govee Home App To download Govee Home App, scan the QR code or search for Govee in the Apple App Store (iOS) or Google Play Store (Android). Note:
Note:
Choose Allow to the permissions requested when opening Govee Home App for the rst time. These permissions allow the apps features to function normally and are not used to record personal, private information. Due to ongoing updates, Govee Home App may be slightly dierent than shown in this manual. In case of any dierences, always follow the in-app instructions. Pairing with Govee Home App 1.Turn on your smartphones Bluetooth. 2.Open Govee Home App, tap the + icon in the top right corner and search for H7101. 3.Tap the device icon and follow the on-screen instructions to complete pairing. You can use Govee Home App to connect your tower fan to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect to each voice assistant. Govee Home App is being continually updated and its features do expand. 07 User Servicing Instruction Cleaning To achieve the best performance, clean the fan at least once during the operating season or before storing it when it will not be used for a long period of time. Turn the fan o and unplug it from power, then use a soft damp cloth to clean its body, Do not immerse the fan in water and never allow water to drip into the motor housing. Do not risk your safety to detach the fan to clean its blade, otherwise this way damage the air inlet, and outlet. fan or shorten its lifespan. Maintenance Fuse replacement Note: The product requires a 2.5 A, 125 V fuse. 1. Grasp the plug and remove from the socket or other outlet device. Do not unplug by pulling the cord. 2. Slide to open the fuse cover on top of the plug towards blades. 3. Remove the fuse carefully by using a small screwdriver to pry it out of the compartment by its metal ends. 4. Replace only with 2.5 A, 125 V fuse to avoid the risk of re. 5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug. 6. Risk of re. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. Step 1 Step 2 Step 3 Step 4 The fan blade cannot be detached. Do not forcibly pry open the part used to x the blade, otherwise it cannot be restored. The motor is permanently lubricated and requires no oiling. Any other servicing not mentioned in this manual should be performed by a professional repair center. 08 Troubleshooting The troubleshooting section below is for solving frequently asked questions. If your problem persists, please contact customer support. For Govee Smart Tower Fan Problem Possible Solution The fan cannot be turned The fan is not plugged in. Plug it into an outlet. on or respond to any Check to see if the power cord is damaged. If so, stop using button touch. the fan and contact customer support. Plug the fan into a dierent outlet. The fan may be malfunctioning. Contact customer support. Airow is weak or slow. The fan is running at Low Speed. Adjust to a higher speed. The air inlet is blocked. Remove the obstruction. The fan makes strange Move the fan to a level surface. noises when it is running. Contact customer support. The fan shakes severely. Refasten the base plate with the fan body and tighten the screw nut. Make sure your smartphone is powered on and is not connected with other Bluetooth For App & Connectivity 1.Cannot connect to Govee Home App. devices. Enable the smartphones Location Services. Try connecting with another smartphone. Make sure your app is updated to the latest version. Make sure you connect to your Wi-Fi routers 2.4GHz network and that the network is working correctly. Make sure the Wi-Fi password you entered is correct. Shorten the distance between the fan, Wi-Fi router, and the smartphone. Make sure your fan and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.) If you are using a VPN, try turning it o and then connecting the fan. Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this fan will not be able to access your Wi-Fi network and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet. 09 2.Cannot nd the device on Bluetooth Device Nearby page of the app. The fan may be connected with another smartphone. Disconnect it from the other smartphone rst. 3.The fan is oine. connection is working. it to the network again. the app. Make sure the fan is plugged in and powered on, then refresh My Devices in Govee Home App by swiping down on the screen. Make sure your router is connected to the internet remove and your phones network If the Wi-Fi password has been changed, the fan will automatically go oine. Try connecting Delete the oine fan from Govee Home App, then add and recongure the fan again in 10 Appendix Specications Model Name Power Voltage Rated Power Net Weight Dimensions Compliance Information FCC Statement H7101 120V ~, 60Hz 37W 2.3kg/5.07lb 270*270*973mm/10.6*10.6*36inch This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following
(1)Reorient or relocate the receiving antenna.
(2)Increase the separation between the equipment and receiver.
(3)Connect the equipment into an outlet on a circuit dierent from that to which the receiver measures:
is connected.
(4)Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in xed/mobile exposure condition. The min separation distance is 20cm. 11 FCC ID:2AQA6-H7101 The following importer is the responsible party Name: GOVEE MOMENTS (US) TRADING LIMITED Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448 Email: support@govee.com Contact information: https://www.govee.com/support IC Statement subject to the following two conditions:
(1) this device may not cause interference, and operation of the device. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
(2) this device must accept any interference, including interference that may cause undesired Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement:
with RF exposure requirements. When using the product, maintain a distance of 20cm from the body to ensure compliance Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous conformer aux exigences en matire d'exposition RF. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license. After-Sales Service Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: support@govee.com Ocial Website: www.govee.com
@Govee
@goveeocial
@govee.ocial
@Goveeocial
@GoveeOcial 12 For FAQs and more information, www.govee.com please visit: