cont Panel Home yam ana Secunty Network andinternet acenae and Sound Prams UserAecunteand Fai see Aopmaranes a enontesion Cook Language and gon Ease othoions Internet Options:
Grange your homepage | Managebrowserad-ons |
Delete brosing history andeookes A.Click Start>Control Panel>Network and Internet > Network and Sharing Center. Network and Sharing Center SD sicccsssconpsnessoniis click Login. 1.WEP-802.1x Password |
6 | Configure AP A.Launch a web browser, say, IE. In the address bar, input 192.168.0.254 and press "Enter".Enter the login user name and password (Both are "admin" by default) and Username |
S5ID Enable Broadcast SSID AP isolation Maximum clients ssid Security Mode Encryption Type _]
TiP=Cow 00806 ED a
[Enable EI Disable @ Ena
[RADIUS Server RADIUS Port RADIUS Key authentication por sumer and
{uinentcavon key of the Radius il 2 screws Ifany items incorrect, missing, or damaged, please keep the original package and contact your reseller for immediate replacement. Network Topology The device is connected to power Solid supply omen com seeeenees SEE Green | Blinking | The device is functioning correctly
off Power is not supplied to the device orthe device is malfunctioning erate Hardware Install 1.Connect the Ethernet cable and phone cable in the wall jack to the device as seen in the figure 2.You can access Internet via a wired or wireless connection. Also you can charge your below (Note: Make sure you leave a proper length of Ethernet cable, say, 5-8cm, inside the jack.) terminal devices using the equipped USB port and connect your telephone to the RJ11 port on the device.
sesonnat I] comesionrotcnaieven EN) Ae Hosting instal the devicein te W.ype walinck OF xine device win seems secows
(stall tne device housing use. Smart Phone Configure PC (Windows 7 is used as an example below.) B.Click Local Area Connection-> Properties. View your basic network information and set up connections aa WIN7XBGEN Unidenttiod network
(This computer) View your active networks, Unidentified network Publienetwork Access type!
Internet
| System Requirement: PC with installed IE8 or higher or Google Web browser ie Tip See fulmap, Connect or disconnect Nonetwork access B.LAN Setup: Click LAN Setup and configure the address mode, LAN IP address, subnet mask, gateway and DNS Server addresses. MAC Address. 00:80:8:06:00:58 Address Mode IP Adres (EEREEETJrereumpe 192 151. >
Subnet Mask Primary ONS Server EEEE) Secondary DNS Server [
(Optional) 2.WPA-PSK, WPA2-PSK Enable [yl Broadcast SSID [Enable EI PEE APisciation cisaio @ Enabe eRe aN bximum clients [25 | (Range:t-25) SSID (B:coM_ 956058 |
Key Update Interval [3600] senso
= (tracer evar) C.Double click Internet Protocol Version 4(TCP/IPv4). co C.Wireless:
configure
(Security settings are explained below). 3.WPA, WPA2 Click Wireless and security settings SSID, Enable Broadcast ssi0 Pisolation Dinabo Maximum clients [25 sip IP-COM_os605e |
None a Security Mode sable D. Configure your PC, IP address:
192.168.0.X(2~253);Subnet mask:
255.255.255.0,and then click OK twice to exit.
-> Basic and Enable
(Range:1-25) Enabe
(Range:1-25) Key Update interval_ Tip
| If your computer is set to a static or fixed IP address (This is uncommon), change it to Obtain an IP address automatically and Obtain DNS Server automatically. See 5 Configure PC. fats cen Oy eal Weeitcs