FCC ID: 2A4A7-PTM-002 Automatic Pet Feeder

Lid Desiccant Box Food Channel Stainless Steel Bowl Bowl USER MANUAL Please read carefully before using Lid Button (Behind) Main Body Cell Cover (Bottom) Manual Feeding Button Add Food Indicator Light (Red) WI-FI/Bluetooth Indicator Light

( Green) Add Food Press the lid button to open and add food. Add Desiccant Take off the lid and open the desiccant box, place the desiccant then close it. Using the Steps Add Food Add dry pet and put the lid.(Suitable for 4-12mm

(0.16-0.47in) diameter dry food) Connect the APP Download the APP "IPETMON"

from APP store or Android APP Market.Then " +Add Device" On the the home page, please connect the device with the reminder. Indicator Description Indicator Name Indicator Status Equipment State Green light quick flash Connected Green Light stays on Waiting for the connection WIFI/Bluetooth Indicator Light Remaining food Indicator Light Red light quick flash Both lights flash Red light out Install the Bowl Place the bowl on ground and main body stuck down as the picture shown. Power-On Take out the charging cable then plug it into the bottom type-C charging port. APP Plan Feeding Set the feeding plan in the APP after connected, it not only automatic feeding as schedule but also can receive feeding records everytime. Manual Feeding Press the manual feeding button twice then give a share of the food(about 5g).

(It can control in APP also) Automatic Pet Feeder Hold the feed button for 5 Sec., the wifi/bluetooth indicator flash quickly then reset succeeds. User Manual Indicator Description This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment

Shenzhen Ipetmon Creative Technology Co., Ltd. C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A4A7-PTM-002 To Whom It May Concern, Date: 13 Feb. 2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. special conditions

(See II. LONG-TERM Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. 1/1 C5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Deng Kaiqi Title:Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization Shenzhen Ipetmon Creative Technology Co., Ltd. Company:Shenzhen Ipetmon Creative Technology Co., Ltd. Address:Complete set of Building 10, Meibao Industrial Zone, Liantang Industrial Zone, Shangcun Community, Gongming Street, Guangming District, Shenzhen Product Name: Automatic Pet Feeder Model Number: PTM-002,PTM-102,PTM-202,PTM-302,PTM-402,PTM-502 FCC Identifier: 2A4A7-PTM-002 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Deng Kaiqi Title: Manager Date: 13 Feb. 2022 Signature of applicant:

1/1

Model difference declaration letter Differences Description We Shenzhen Ipetmon Creative Technology Co., Ltd. state:

Product Model Name Automatic Pet Feeder PTM-002,PTM-102,PTM-202,PTM-302,PTM-402, PTM-502 The above product with same circuit, PCB layout, electrical parts, materials and the materials of decorative accessories is wiring structures, Appearance shape, same, only different color. Signatory Date: 02-13-2022

<Signature>

NameDeng Kaiqi TitleManager CompanyShenzhen Ipetmon Creative Technology Co., Ltd. Address:Complete set of Building 10, Meibao Industrial Zone, Liantang Industrial Zone, Shangcun Community, Gongming Street, Guangming District, Shenzhen