Single Side BT Controller Introduction PG-9120 EN Application:
1.Thanks very much for purchasing ipega brand PG-9120 BT controller. 2.Application device: Android and iOS Smartphone/ tablet. 3.Extendable size fit for 140-220mm smart phone and tablet,height of slot space is 10mm. Due to mobile system issues, some mobile may not support this device(e.g.:mobile under MTK platform do not support) Due to the official game platform software upgrades or source code changes and other not resist factors caused some of the game can not be played or connected with our Gamepad, iPega company has no responsibility.iPega reserve the right of final interpretation for this. Introduction for Key Function L1/L2 Charge indicator Pair indicator Left 3D & L3 D-pad HOME Charging port When using this product, please placed the device horizontally. make sure the HOME key is on the right Extendable size fit for 140-220mm smart phone and tablet,height of slot space is 10mm. For Android Devices For IOS Devices (Direct Play Mode) Charging/Sleep/Awaken Function:
1. Scan QR code on the right through mobile, download and install Octopus platform Scan the QR code to download Octopus 2. Turn on the device by pressing both D-pad Right key and key for 3-5 seconds until blue light flashing, open the BT setting on mobile and search name of "PG-9120" and pair, blue light will be on after connected. 3.Open the game platform, add installed mobile games to the platform, open the games from the platform, then you can start your game experience. 1.Enter the pairing mode by pressing both D-pad Left key and key for 3 seconds until blue light flashing, open the mobile BT setting and search nane of "PG-9120" and pair, blue light will be on after connected. 2. Re-connection: Long press Home key for 3-5 second will auto re-connected, if failed to connection, the device will turn off and enter sleep mode in 10 minutes;
3.If need to reset the mapped buttons, please download APP;
Search "Shooting Plus" on APP store, download and install the APP. 4.E-IntroductionSearch www.ipega.hk and find detailed operation introduction 5.Support IOS system 11.0 or above Pic 1 Pic 3 Pic 2 BT On Paired devices Available devices PG-9120 Pic 1 Pic 3 BT PG-9120 Pic 2 1. When the controller is off and plug in adapter, the orange light flashes slowly means the gamepad is charging, the light will be off after fully charged, 2. While the controller is under connection status, it will automatic turn off if without any operation in 10 minutes. 3. Turn off the device and press HOME keys for 5 seconds to enter re-connection. 4. The blue light will flash if low battery. ShootingPlus V3 Electrical Specification 1.Working VoltageDC3.7V 2.Working Current <10 mA 3.Support continues playing up to 20H 4.Sleep Current: <10uA 5.Charging Voltage/CurrentDC5V/500mA USB Type-C charging port 6.BT 4.0, transmission distance8M 7.Battery capacity380mAh 8.Standby Time30 days after fully charged BT Accessories List:
Gamepad x1 User Manual x1 Type-C cable x1 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.