FCC ID: 2BBWU-R200 RGB Wireless Speaker

Packet list RGB WirelessSpeaker R200 x1 USB Data cable x1 Manual x1 Producticon Keys Speaker Lighting Product Description Long press:Total power-turn on/off

(After the light is turned off, you can press and press it) Short press: Switch light mode

(Law RGB/Automatic RGB/warm light/white light/turn) Long Press:

Light Brightness Adjustment Double-click:

Wireless -turn on/cut off/off

(10 minutes after cutting, do not operate automatically,turn off Wireless Wireless connection:

After the speaker is turned on, it automatically entersthe Wireless search connection mode.At this time.there are prompt sounds. Found on the Wireless settings page of the mobile device, and the "R200" is connected. Indications:

Charging status-red lights are always bright;full-charged state-blue lights are often on;

low-power state-sound reminder. Product Parameters Product Name: RGB Wireless Speaker R200 Product model: R200 Material: ABS Net weight: 160g Input: USB DC5V/2A Product size: 122X122X31mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable file:///G/360MoveData/Users/123456/Desktop/RGB%20Wireless%20Speaker(1).txt[2023/6/26 17:08:02]

exposure condition without restriction file:///G/360MoveData/Users/123456/Desktop/RGB%20Wireless%20Speaker(1).txt[2023/6/26 17:08:02]

ShenZhen JiaHong Creative Co.,LTD

(2023.07.03) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature:

Name: Zhu Bingsi Title: Mechanism Engineer

(ShenZhen JiaHong Creative Co.,LTD) w Eurofins Electrical and Electronic Testing NA, Inc. 914 Wesi Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911{d)(5)(ii) request for (FCC ID:2BBWU-R200)

[ShenZhen JiaHone Creative Co.,LTD] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity oroducing covered equipment. Sincerely, WY 4 P

(Applicant signature) Zhu Bing t

(Applicant printed name) Zhu Bingsi nZhen JiaHong Creative Co.,LTD) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(c)}(5)(i) request for (FCC 1D:2BBWU-R200)

[ShenZhe aHong Creative Co.,LTD] (the applicant) certifies that the equipment for which authorization i is sought i is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature) Zhu Being

(Applicant printed name) Zhu ae

ShenZhen JiaHong Creative Co.,LTD

(2023.07.03) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (RGB Wireless Speaker / R200/ FCC ID: 2BBWU-R200) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature:

Name: Zhu Bingsi Title: Mechanism Engineer

Attestation Statements TO: Federal Communications Commi:

Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID:2BBWU-R200 )

(ShenZhen JiaHong Creative Co, LTD), the undersigned, hereby authorize (SOUTH BAY INNOVATION LLC) to act as our designated U.S. agent for service of process, (ShenZhen JiaHong Creative Co.,LTD) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

{SOUTH BAY INNOVATION LLC) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the Applicant Information:

Company name: ShenZhen JiaHong Creative Co.,LTD ingsi Address: Room B1003,No 2 building,LongGang TianAn Digital Innonvation Park,No449,HuangGe North Road,LongCheng Sub-district,ShenZhen Telephone No: 13538214502 Email: production6@ jiahongcreative.com Contact Name: Zhu U.S. Agent Information:

Company Name: SOUTH BAY INNOVATION LLC. Address: 23545 CRENSHAW BLVD STE 106 Torrance, CA90505 Contact Name: Yueting Zhu Telephone No: 4243769142 Email: southbayinnovation@ southbayinnovation.com FRN: 0033401811 Zhu Bug st yore Applicant Signature: Agent Signature:

Applicant printed name: Zhu Bingsi Agent printed name: Yueting Zhu