O F F O N D C 5 V DC 5V OFFON DC 5V OFFON 2 5 3 4
(1)In the display state, click the power button to increase the volume cycle.
(2)When the screen is o, click the power button to trigger the bright screen, and click the second time to adjust the volume.
(3) When there is interference in the same frequency band with other devices or the environment interference is large, the frequency of the microphone can be adjusted by "3 clicks", there are 15 channels in total. Normally no need to adjust the frequency.
(4) When the frequency is adjusted, the receiver A or B indicator will ash, and after the frequency is paired, it will return to steady light.
(1)Switch on and o: Press and hold for 1 second to turn on the microphone, and long press for 2 seconds to turn o the microphone.
(2)Volume adjustment: short press the power button to adjust the volume, there are 5 levels in total, the minimum is 1 level, each time the power button is pressed, it increases by one level, and it cycles between 1 and 5.
(3)Frequency conversion adjustment: "3-click"
the power button to adjust the frequency, a total of 15 levels, each "3-click" power button increases by one level, and cycles between 1 and 15.
(4)Frequency lock operation: In the "frequency lock" o state, long press the power button for
"15 seconds" to automatically turn on and the antenna symbol ashes to indicate that the code is being matched.When the antenna symbol is always on, it means that the frequency lock is completed. After the frequency lock is completed, you must restart the machine to save the pairing le. In the
"de-frequency" o state, press and hold the power button for "15 seconds" to automatically turn on and the antenna symbol ashes to indicate decoding. When the antenna symbol is always on, the de-frequency is completed. After the de-frequency is completed, the machine must be restarted to save the de-frequency. document. An external DC 5V/2A power charger is used to charge the microphone.
(1)When charging in the o state, the charging indicator lights up in red, and the light goes out when fully charged.
(2)When charging in the power-on state, the battery cursor blinks and the battery is fully charged. DC 5V OFFON 2 3 4 6 A 5 B 7 External DC 5V power supply to charge the receiver
(1)Conventional computer USB ports, power banks, USB charging heads, etc. can be used to charge this product. It is recommended to use DC5V 2A power supply equipment to charge this product.
(2)Choose a 5V 2A charger, which can be fully charged in 2.5H. If the current is too small, the charging time will be prolonged.
(1)Turn the switch to "ON" to turn on the device.
(2)Turn the switch to "OFF" to turn o the device.
(1)Please charge when the receiver cannot be turned on.
(2)Ensure that the battery is charged at least once a month when it is not used for a long time to ensure battery activity. Plug into the 6.3mm MIC input of the amplier The receiver can be inserted into the sound reinforcement equipment with only 3.5mm MIC through the adapter. Lights up to indicate that the transmitter and receiver are successfully connected. The ashing light indicates that the connection signal is unstable. Please shorten the distance between the microphone and the receiver to reduce space obstacles. The light is always on when charging, and turns o when fully charged Lights up to indicate that the transmitter and receiver are successfully connected. The ashing light indicates that the connection signal is unstable. Please shorten the distance between the microphone and the receiver to reduce space obstacles. FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.