FCC ID: RBD-NP11AC Laptop

N11250: Quick Start Guide In the box Buttons and ports Getting started Using the touchpad 6 POWER ON: Pr ess and hold the POWER bu tton until the tablet turns on. After completing the Windows setup, the home screen will be displayed. The touchpad provides the funct ionality of a mouse. It has a touch-sensitive surface th at senses the motion and position Scroll:

cloudBook 11.6 Laptop cloudBook Quick Start Guide N11250 7 8 9 10 11 1 2 4 3 5 13 12 14 15 16 Left Clic k Righ t Clic k 11 12 3.5mm headphone jack 13 USB 2.0 14 MicroSD card slot POWER OF F: Select Start > Power

> Shut down. Note: The device should be shut down through the Windows OS as shown above. However, if you need to force the device to shut down, press and hold the POWER button until the display turns o and the device shuts down. Power button Charging indicator light Power button DC Input USB 3.0 Mini HDMI 1 2 3 4 5 6 7 8 9 Caps lock indicator light Num lock indicator light 10 Function/Shortcut keys USB type C (data only) 15 SSD slot Camera 16 Touchpad Power indicator light 17 Dual speakers Wall outlet Adapter DC charger port NOTE: Do not press down on the area in gray below, it is for touch comman ds only. Touch Only

(Do not press down) Left Clic k Right Click slide them to scroll in any direction on the page or program Zoom:

then move them apart or closer to zoom-in or zoom-out. Switch program:

swipe to either side to switch between open windows and programs. nd Quick Start Guide N11250 Quick start guide Adapter 17 Click to see all the pre-installed apps. Function/Shortcut keys Windows 10 S Mode To access the shortcuts of the Function keys, F1 through F12, press & hold the Fn button and select the desired Function key. Your laptop is shipped with Windows 10 S Mode which is a version of Windows 10 that's streamlined for security and performance, while providing a familiar Windows experience. To increase security, it allows only apps from the Microsoft Store, and requires Microsoft Edge for safe browsing. 2. Find the Switch to Windows 10 Home or Switch to Windows 10 Pro section, then select Go to the Store. Note: Don't select the link under "Upgrade your edition of Windows". For more info, visit https://www.microsoft.com/en-us/windows/s-mode Switching out of S mode To increase security and performance, Windows 10 in S mode runs only apps from the Microsoft Store. If you want to install an app that isn't available in the Microsoft Store, you'll need to perma-

nently switch out of S mode. There's no charge to switch out of S mode, but you won't be able to turn it back on. To switch out of S mode follow the steps below . 1. On your PC running Windows 10 in S mode, open Settings >

Update & Security > Activation. 3. On the page that appears in the Microsoft Store (Switch out of S mode able to install apps from outside the Microsoft Store. To add the SSD follow the steps below. Expanding the storage You can expand the storage of your laptop (up to 1TB) by adding a SATA M.2 SSD (not included) into the slot on the bottom of the laptop. Note: Make sure your laptop is shutdown while you are installing or removing the SSD. SATA M.2 SSD (not included) SATA M.2 SSD 1. Locate the SSD slot on the bottom of the laptop. 2. Unscrew and open the SSD slot cover. 3. Remove the screw inside the SSD slot. A M . 2 S S D S A T 2 D S A M . 2 S T A S 1 Note: After installing the SSD it must be formatted. For instructions on how to format the SSD, please go to:

https://www.southerntelecom.com/laptops 4. Install the SSD (in order shown above). 5. Secure the SSD with the screw as shown above. 6. Close and screw in the SSD slot cover. Legal information FCC P art 15:

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or encouraged to try to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. Do not attempt to repair or connected. modify this equipment. War nin g responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Shielded USB cables must be used with this unit to ensure compliance with the Class B FCC limits. IC WARNING This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device ADVERTENCIA IC Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis auxdeux conditions suivantes :

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Bat tery Dis posal & Recyc le This device contains a Lithium-ion battery. The battery must be recycled or disposed of properly. Informatio n Rega rding Exposure to Radio F reque ncy Ener gy Your device is designed and manufactured not to exceed the emission limits for exposure to RF energy set by the Federal Communications Commission of the United States (FCC). Information 1-800-822-8837 http://www.fcc.gov/oet/ea/ after searching on the FCC ID for your Device, which can be found on the back of the Device. If your electronic device has internal memory on which personal or other 2020 All Rights Reserved. Designed and distributed by Southern Telecom Inc. Brooklyn, NY 11220 dispose of your device to assure another party cannot access your personal data. Data sanitization varies by the type of product and its software, and you may want to research the best sanitization process for your device before disposal. You may also check with your local recycling facility to determine their data sanitization procedures during the recycling process. Packard Bell is a registered trademark of PBX Holding LLC. All other trademarks and trade names are those of their respective owners. 1-Year Limited Warranty Territory: United States/Canada LIMITED WARRANTY TO ORIGINAL CONSUMER This product (including any accessories included in the original packaging) as supplied and distributed new by an authorized retailer is warranted by Southern Telecom, Inc. to the original consumer purchaser against defects in materials and workmanship (Warranty) as follows:

To obtain warranty service:

Visit our website at www.southerntelecom.com Click on Product Support Select the Brand of your device Select Service Request Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is claim with the carrier. Warranty service not provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTORS SOLE DISCRETION - ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, CONSUMERS RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty province. Contact your authorized retailer to determine if another warranty applies.

27.69X18.95X1.73CM This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

27.69X18.95X1.73CM This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

27.69X18.95X1.73CM This device complies with Part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

December 29, 2020 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with S h e n z h e n J i n g w a h I n f o r m a t i o n T e c h n o l o g y C o . , L t d . / 6 F , B l d g . 4 , J i n g h u a S q u a r e , N o . 1 6 8 , Z h e n z h o n g R d . , F u q i a n g C o m m u n i t y , H u a q i a n g b e i , F u t i a n D i s t r i c t , S h e n z h e n December 29, 2020 Dated this Agency agreement expiration date:

By:

Title:

On behalf of :

Manager Asistant Signature Telephone:

0755-83975295 Usually Give 8 - 12 Months Sun MingXue Printed Shenzhen Jingwah Information Technology Co., Ltd.

December 29, 2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: RBD-NP11AC Product Name: Laptop Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description BOM December 29, 2020 These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this Agency agreement expiration date:

By:

Title:

On behalf of :

Usually Give 8 - 12 Months Sun MingXue Manager Asistant Signature Printed Shenzhen Jingwah Information Technology Co., Ltd. Telephone: 0755-83975295

Shenzhen Jingwah Information Technology Co., Ltd. 4F, Bldg 4, Jinghua Square, No.1 Huafa North Road, Futian District, Shenzhen, China Tel.: 0755-83976295 Fax.: 0755-83204874 www.jwdigital.com Statement We Shenzhen Jingwah Information Technology Co., Ltd. Hereby Declare that The product Laptop, models no. NP11A-C, N11250 and N11260 are all identical in interior structure, electrical circuits and components, and just model names are different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely, Signature:

Company Name: Shenzhen Jingwah Information Technology Co., Ltd.