FCC ID: 2AT2J-MH11901 Monster Bluetooth Headphones

Model No.:MH11901 Quick Guide

* please read this manual carefully and keep it for future use. Product Overview:

* Wireless Earbuds x 2 (Left & Right)

* Charging Case

* Earwings x 3 Pairs

* Eartips x 3 Pairs

* Micro USB Cable

* User Manual & Letter of Guarantee 1. Ear fins 2. Multi-function ButtonMFB 3. LED Indicator Light 4. Charging Point 5. Eartips 6. Charging Case Charging Port 7. Charging Case LED Power On/Off Take the earbuds out of the charging case, and the earbuds will be automatically power on. When the earbuds is power on, put the earbuds into the charging case, and the earbuds can be power off and charging. To try different sizes of ear tips to find comfortable sizes Rotate the earphone to wear the angle to make it wearable and comfortable Pairing Take out the left and right earbuds from the charging box, the earbuds will start automatically, and the L/R ears will entry pairing mode automatically. Then wait a few seconds, the L/R earbuds will connect with each other automatically , at the same time, you can hear the voice prompt of "pairing", then open the bluetooth of the phone, search device name Clarity 102 AirLinks to connection. Volume Control Double press Multi Function Buttons (R) to turn volume up. Double press Multi Function Buttons (L) to turn volume down. Calling Answer/End Call: Short press MFB button to answer/end the phone call. Reject Call: Long press MFB button about 2 seconds to reject phone call. Music Paly/Pause Music: Short press MFB button to play/pause music. Previous Track(Left earbud): Long press MFB button to 2 seconds. Next Track(Right earbud): Long press MFB button 2 seconds. Voice Control Connected with the mobile phone, quick double click the MFB button to enter into the voice state LED Indicator guide Status Power On Power Off Pairing Connect Charging Description Voice Prompt Blue LED flash light about 1 second Power On Red LED flash light about 1 second Power Off Blue&Red LED flashes alternately Pairing Blue LED flash every 6 seconds Connected Red LED is bright when the earphone is N/A charging Attention Please FULLY CHARGE before use. DO NOT PRESS ANY KEY for pairing. Earbuds will go to pairing mode Automatically after took out. Put the earbuds in CORRECT POSITION for charging.

*If the battery is not replaced properly, there will be explosion risk. The battery can only be replaced with the same type or equivalent type of battery. It is not recommended to replace the battery without permission, but can be returned to the manufacturer for replacement.

*Batteries [battery packs or combination batteries] shall not be exposed to such conditions as lighting, baking, or similar overheating. FCC Statement FCC ID: 2AT2J-MH11901 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EUT Internal Photograph

(1) EUT Photo (Left Headphone) Report No.: 1908RSU011-UE

(2) EUT Photo (Left Headphone) 1 of 3

(3) EUT Photo (Left Headphone) Report No.: 1908RSU011-UE

(4) EUT Photo (Right Headphone) 2 of 3

(5) EUT Photo (Right Headphone) Report No.: 1908RSU011-UE

(6) EUT Photo (Right Headphone) 3 of 3

EUT External Photograph

(1) EUT Photo Report No.: 1908RSU011-UE

(2) EUT Photo 1 of 11

(3) EUT Photo Report No.: 1908RSU011-UE

(4) EUT Photo 2 of 11

(5) EUT Photo Report No.: 1908RSU011-UE

(6) EUT Photo 3 of 11

(7) EUT Photo Report No.: 1908RSU011-UE

(8) EUT Photo 4 of 11

(9) EUT Photo Report No.: 1908RSU011-UE

(10) EUT Photo (Left Headphone) 5 of 11

(11) EUT Photo (Left Headphone) Report No.: 1908RSU011-UE

(12) EUT Photo (Left Headphone) 6 of 11

(13) EUT Photo (Left Headphone) Report No.: 1908RSU011-UE

(14) EUT Photo (Left Headphone) 7 of 11

(15) EUT Photo (Left Headphone) Report No.: 1908RSU011-UE

(16) EUT Photo (Right Headphone) 8 of 11

(17) EUT Photo (Right Headphone) Report No.: 1908RSU011-UE

(18) EUT Photo (Right Headphone) 9 of 11

(19) EUT Photo (Right Headphone) Report No.: 1908RSU011-UE

(20) EUT Photo (Right Headphone) 10 of 11

(21) EUT Photo (Right Headphone) Report No.: 1908RSU011-UE 11 of 11

Label Label Location Remark: The device is too small to show the FCC ID. It may put in the user manual.

SHENZHEN JMT TECH LTD. 3F, Building3, Jinfo Industrial Park, Hezhou Village, Hangcheng Street, Baoan District, Shenzhen, China Declaration of Authorization We Name: SHENZHEN JMT TECH LTD. Address: 3F, Building3, Jinfo Industrial Park, Hezhou Village, Hangcheng Street, Baoan District, Shenzhen, China Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

MRT Technology (Suzhou) Co., Ltd Address:

City:

Country D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, Suzhou China is authorized to apply for Certification of the following product(s):

Product Description: Monster Bluetooth Headphones FCC ID: 2AT2J-MH11901 Model Number: MH11901 Brand Name: MONSTER Sincerely, Signature:

Name: Sipeng Yu Position: Product Manager SHENZHEN JMT TECH LTD.

SHENZHEN JMT TECH LTD. 3F, Building3, Jinfo Industrial Park, Hezhou Village, Hangcheng Street, Baoan District, Shenzhen, China Confidentiality Request Letter Date: October 12, 2019 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AT2J-MH11901 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature:

Name: Sipeng Yu Position: Product Manager SHENZHEN JMT TECH LTD.

Attestation Date: 2019-10-15 FCC: 2AT2J-MH11901 We declared that:

The left and tight earpieces are electrically identical, refers to the schematics and the

block diagram. The difference of them is only the PCB colour and the appearance design as the wear requirement, and silk screened L and R. Sincerely,

) Sign by: _ por in Print Name: Sipeng Yu Title: Product Manager SHENZHEN JMT TECH LTD.