all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 5.43 MiB | June 19 2023 | |||
1 |
|
Internal photos | Internal Photos | 3.33 MiB | June 19 2023 | |||
1 |
|
External photos | External Photos | 2.31 MiB | June 19 2023 | |||
1 |
|
ID label and location | ID Label/Location Info | 1.09 MiB | June 19 2023 | |||
1 |
|
Antenna specifications | Test Report | 291.17 KiB | June 19 2023 | |||
1 |
|
Attestation Statements | Attestation Statements | 48.74 KiB | June 19 2023 | |||
1 | Block Diagram | Block Diagram | June 19 2023 | confidential | ||||
1 |
|
Confidentiality | Cover Letter(s) | 109.12 KiB | June 19 2023 | |||
1 |
|
Letter Authorization | Cover Letter(s) | 85.09 KiB | June 19 2023 | |||
1 | Operational Description | Operational Description | June 19 2023 | confidential | ||||
1 |
|
RF Exposure | RF Exposure Info | 221.52 KiB | June 19 2023 | |||
1 | Schematics | Schematics | June 19 2023 | confidential | ||||
1 |
|
Test reports-1 | Test Report | 3.29 MiB | June 19 2023 | |||
1 |
|
Test reports-2 | Test Report | 3.02 MiB | June 19 2023 | |||
1 |
|
Test setup photos | Test Setup Photos | 1002.35 KiB | June 19 2023 | |||
1 |
|
US Agent Letter | Attestation Statements | 27.42 KiB | June 19 2023 |
1 | User manual | Users Manual | 5.43 MiB | June 19 2023 |
OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. / No de Cat. 2952-20 M18 BLUETOOTH JOBSITE RADIO RADIO DE CHANTIER BLUETOOTH M18 RADIO PARA SITIO DE TRABAJO BLUETOOTH M18 WARNING To reduce the risk of injury, user must read and understand operator's manual. WARNING To reduce the risk of injury, user must read and understand operator's manual. AVERTISSEMENT Afin de rduire le risque de blessures, l'utilisateur doit lire et bien AVERTISSEMENT Afin de rduire le risque de blessures, l'utilisateur doit lire et bien comprendre le manuel. comprendre le manuel. ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual. ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual. SPECIFIC SAFETY RULES Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained professional for additional information or training. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. Federal Communications Commission Pursuant to part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules and ISED-Canadas license exempt RSS standards. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. IMPORTANT SAFETY INSTRUCTIONS WARNING READ, UNDERSTAND AND FOL-
LOW ALL INSTRUCTIONS. Failure to heed all warnings listed below, may result in electric shock, fire and/or serious personal injury. KEEP THESE INSTRUCTIONS. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other ap-
paratus (including amplifiers that produce heat.) Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the ap-
paratus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING To reduce the risk of fire or electric shock, do not expose this appa-
ratus to rain or moisture. Only plug power supply into readily accessible out-
let to allow the appliance to be unplugged quickly. A battery operated radio with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A char-
ger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery operated radio only with specifically designated battery packs. Use of any other bat-
teries may create a risk of fire. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. Store your battery pack in a cool, dry place. Do not store battery pack where temperatures may exceed 120F (50C) such as direct sunlight, a vehicle or metal building during the summer. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock if your body is grounded. Only use the provided adaptor plug. Never disassemble the radio or try to do any rewiring on the radio's electrical system. Do not expose this apparatus to dripping and splashing, or place objects filled with liquids on this unit. 2 EXTENSION CORDS Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown to determine the required minimum wire size. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. When using more than one extension cord to make up the total length, be sure each cord contains at least the minimum wire size required. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum wire size. Guidelines for Using Extension Cords If you are using an extension cord outdoors, be sure it is marked with the suffix W-A (W in Canada) to indicate that it is acceptable for outdoor use. Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or wet areas. Recommended Minimum Wire Gauge For Extension Cords*
Nameplate Amps 0 - 2.0 2.1 - 3.4 3.5 - 5.0 5.1 - 7.0 7.1 - 12.0 12.1 - 16.0 16.1 - 20.0 25'
18 18 18 18 16 14 12 Extension Cord Length 75'
18 18 16 14 12 10
100'
18 16 14 12 10
50'
18 18 18 16 14 12 10 150'
16 14 12 12
* Based on limiting the line voltage drop to five volts at 150%
of the rated amperes. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICI-
ING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equi-
lateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature accompanying the appliance. READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. 3 FUNCTIONAL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 13 12 1. Power button 2. Bluetooth button 3. AM/FM button 4. Preset button 5. Clock button 6. EQ button 7. Display 8. Play/Pause button 9. Seek/adjust buttons 10. Volume buttons 11. Antenna 12. Battery bay 13. Backup-battery compartment 14. Power adapter port 15. Port cover 16. USB-C power outlet 16 14 15 SPECIFICATIONS Cat. No. .................................................... 2952-20 Battery Type .................................................M18 Charger Type................................................M18 AC Input Volts ................................................ 120 V AC Input Amps.................................................1.2 A DC Input Volts ................................................. 18 V DC Output Volts ............................................... 18 V DC Output Amps.................................................3 A Output Volts USB-C ........................................... 5 V Output Amps USB-C...........................................3 A FCC ID .............................................2AB9S-2952-20 Replacement adapter .............................42-04-0021 Recommended Ambient Operating Temperature ....................14F to 104F
(-10C to 40C) Changing Back-up Batteries WARNING Batteries may leak chemicals or may explode if used incorrectly. The following care should be taken to prevent such an incident:
Make sure the positive (+) and negative (-) bat-
tery terminals are positioned correctly. Do not mix new and old batteries together, or mix different types of batteries. Do not try to recharge non-rechargeable batteries. If chemicals from the batteries come in contact with your skin, wash them off immediately with water. If chemicals leak onto the radio, clean the radio completely. To hold station presets and clock time when the bat-
tery pack is removed, 2 AAA batteries are required. 1. Remove battery pack and unplug radio. 2. Remove the screw and battery cover. 3. Insert two (2) AAA batteries according to matching positive (+) and negative (-) marks. 4. Replace the battery cover and screw. OPERATION WARNING To reduce the risk of fire or electric shock, do not expose this radio to rain or moisture. Turning On/Off and Controlling Volume Plug the cord into an appropriate AC outlet or install a battery pack. Press the power button to turn the radio on and off. The radio station (frequency) is displayed. To display the time, press the CLOCK button. Volume is restored to the last setting. NOTE: When the radio is running on battery power, the display will dim after 5 minutes to reduce power use. Press the volume buttons to increase or decrease the volume. Setting the Clock 1. Press and hold the CLOCK button until the hour begins to flash. 2. Use the buttons to change the hour. 3. Press the CLOCK button again. Use the to change the minutes. 4. Press the CLOCK button again to save. EQ Adjustment To manually adjust the Bass/Treble sound, press the EQ button. Set the bass sound by using the buttons. Press the EQ button again to set the treble sound by using the buttons. Selecting Band Push the AM/FM button to select AM or FM. Tuning (Seeking and Scanning) buttons to SEEK through Press and hold the the band. When a station is found, the SEEK will stop. Use the SCAN button to continue through the stations, pausing at each. SYMBOLOGY Volts Direct Current Amps Hertz Read operators manual Presence of important operating instructions. CAUTION Risk of electric shock. Federal Communications Commission Approval Mark for Mexico UL Listing for Canada and U.S. ASSEMBLY WARNING Recharge only with the charger specified for the battery. For spe-
cific charging instructions, read the operators manual supplied with your charger and battery. Removing/Inserting the Battery To remove the battery, push in the release buttons and pull the battery pack away from the tool. any time the tool is not in use. WARNING Always remove the battery pack To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place. WARNING Only use accessories specifically recommended for this tool. Others may be hazardous. Power The MILWAUKEE jobsite radio can be powered by MILWAUKEE M18 Li-Ion battery packs or provided adapter. When plugged into a wall outlet, the bat-
tery bay will not charge MILWAUKEE M18 Li-Ion battery packs. Low Battery Indicator When the radio is powered by a battery pack and its charge falls below 10%, the low battery indicator is displayed. USB-C Power Outlet This outlet can be used to charge a USB device that uses less than 3 A of DC electrical current. The USB-
C outlet will supply power when the battery pack is inserted and the radio is ON, or anytime the radio is plugged into the wall adapter. NOTE: Any device that uses more than 3 A of DC electrical current will trip a self-resetting function and disable the output. 4 MAINTENANCE WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the battery pack, charger, or tool, except as pro-
vided in these instructions. Contact a MILWAUKEE service facility for all other repairs. Maintaining Tool Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program. Inspect your tool for issues such as undue noise, misalignment or binding of moving parts, breakage of parts, or any other condition that may affect the tool operation. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work prop-
erly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs. WARNING To reduce the risk of personal in-
jury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them. Cleaning Clean dust and debris from any vents. Keep tool clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use flammable or combustible solvents around tools. Repairs For repairs, return the tool, battery pack and charger to the nearest authorized service center. ACCESSORIES WARNING Use only recommended accesso-
For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor. ries. Others may be hazardous. SERVICE - UNITED STATES 1-800-SAWDUST (1.800.729.3878) Monday-Friday, 7:00 AM - 6:30 PM CST or visit www.milwaukeetool.com Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions. Email: metproductsupport@milwaukeetool.com B e c o m e a H e a v y D u t y C l u b M e m b e r a t www.milwaukeetool.com to receive important notifications regarding your tool purchases. PRESET Stations To set the PRESET stations:
1. Tune to desired station. 2. Press and hold the PRESET button until the PRESET indicator on the display begins to flash. buttons to select the PRESET location for the station. Nine locations (1-9) are available. 3. Use the 4. Press the PRESET button to save the location. To tune to a PRESET station:
Press and release the PRESET button to step through the PRESET stations. To enter the Bluetooth mode, press the Using Bluetooth button. Pairing If no Bluetooth device is connected, Bluetooth pairing will begin automatically and the icon will flash on the display. The radio will continue to search for a signal for 3 minutes. To manually pair a device, press and hold the Bluetooth button until the begins While the on the Bluetooth capable device. Once the device has successfully paired with the radio, a tone will play and the icon will be shown on the radio's display. is flashing, select "M18 Jobsite Radio"
to flash. Connecting will be shown on the radio's display. To enter the Bluetooth mode, press the When the radio locates a paired Bluetooth device, the If connection is lost between the radio and the Bluetooth device, the radio will try to reconnect automatically for up to 3 minutes. button. Controlling When streaming music through to the radio via a Bluetooth device, use the button to start and pause the music. Use the buttons to move through the tracks. 5 SERVICE - CANADA Milwaukee Tool (Canada) Ltd 1.877.948.2360 Monday-Friday, 7:00 AM - 4:30 PM CST or visit www.milwaukeetool.ca LIMITED WARRANTY USA & CANADA This MILWAUKEE power tool* is warranted to the original purchaser from an authorized MILWAUKEE distributor only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on this power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE factory Service Center location or MILWAUKEE Autho-
rized Service Station, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, chucks, brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper cover washers.
*This warranty does not cover battery packs or all power tools. Refer to the separate and distinct warranties available for those products. The warranty period for the LED in the LED Work Light (49-24-0171) and the LED Upgrade Bulb (49-81-0090) is the lifetime of the product subject to the limitations above. If during normal use the LED or LED Upgrade Bulb fails, the part will be replaced free of charge. Warranty Registration is not necessary to obtain the applicable war-
ranty on a MILWAUKEE power tool product. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-
TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-
SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX-
CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-
RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. This warranty applies to product sold in the U.S.A. and Canada only. Please consult the Service Center Search in the Parts & Service sec-
tion of MILWAUKEEs website www.milwaukeetool.com or call 1.800. SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE power tool. CONSIGNES DE SCURIT IMPORTANTES AVERTISSEMENT VOUSE DEVEZ LIRE, COM-
PRENDRE ET SUIVRE TOUTES LES INSTUCTIONS. Le non-respect de tous les avertissements figurant dans la liste ci-
dessous entrane un risque de choc lectrique, d'incendie et/ou de blessures graves. CONSERVEZ CES INSTRUCTIONS. Lire les instructions suivantes. Conserver ces instructions. Respecter tous les avertissements. Suivre toutes les instructions. Ne pas utiliser cet appareil proximit de leau. Nettoyer seulement avec un chiffon sec. Ne pas installer lappareil proximit de sources de chaleur comme des radiateurs, des registres de chaleur, des poles ou dautres appareils (notam-
ment des amplificateurs produisant de la chaleur.) Utiliser seulement des accessoires spcifis par le fabricant. Utiliser uniquement avec le chariot, le pied, le trpied, le support ou la table recommands par le fabricant ou fournis avec lappareil. Si un chariot est utilis, dplacer lensemble chariot/appareil avec prcaution afin de ne pas le renverser, ce qui pourrait entraner des blessures. Dbrancher cet appareil pendant les orages ou lorsquil nest pas utilis pendant de longues priodes. Confier toute rparation du personnel qualifi. Des rparations sont ncessaires si lappareil est endommag dune faon quelconque, comme :
cordon ou prise dalimentation endommag(e), liquide renvers ou objets tombs dans lappareil, exposition de lappareil la pluie ou lhumidit, appareil ne fonctionnant pas normalement ou que lon a fait tomber. AVERTISSEMENT Pour rduire les risques dincendie ou de choc lectrique, ne pas exposer cet appareil la pluie ou lhumidit. Brancher lalimentation uniquement dans une prise facilement accessible afin de pouvoir dbrancher rapidement lappareil. Les blocs-piles des radios piles, quils soient intgrs ou amovibles, ne doivent tre rechargs quavec le chargeur spcifi. Un chargeur appropri pour un type de piles peut crer un risque dincendie sil est utilis avec un autre type de piles. Utiliser exclusivement les blocs-piles spcifique-
ment indiqus pour la radio. Lutilisation de tout autre bloc peut crer un risque dincendie. Lorsque le bloc-pile nest pas utilis, le tenir lcart darticles mtalliques tels que : les at-
taches trombones, pices de monnaie, cls, clous, vis et autres petits objets mtalliques ris-
quant dtablir le contact entre les deux bornes. La mise en court-circuit des bornes de pile peut causer des tincelles, des brlures ou un incendie. viter tout contact corporel avec des surfaces mises la terre, telles que les tuyaux, radiateurs, cuisinires et rfrigrateurs. Le risque de choc lectrique est accru lorsque le corps est mis la terre. Utiliser uniquement la fiche pour adaptateur fourni. 6 Ne jamais dmonter la radio ou tenter de procder la rfection du cblage de son systme lectrique. Ne jamais exposer cet appareil des risques de coulures et dclaboussements, et ne jamais poser dobjets remplis de liquides sur cet appareil. RGLES DE SCURIT SPCIFIQUES Toujours faire preuve de bons sens et procder avec prudence lors de lutilisation doutils. Cest impossible de prvoir toutes les situations dont le rsultat est dangereux. Ne pas utiliser cet outil si vous ne comprenez pas ces instructions dopration ou si vous pensez que le travail dpasse votre capacit ;
veuillez contacter Milwaukee Tool ou un professionnel form pour recevoir plus dinformation ou formation. Maintenir en ltat les tiquettes et les plaques didentification. Des informations importantes y figurent. Si elles sont illisibles ou manquantes, contacter un centre de services et dentretien MILWAUKEE pour un remplacement gratuit. Federal Communications Commission Conformment la partie 15.21 des rgles FCC, vous tes averti que les changements ou modifications non expressment approuvs par la partie responsable de la conformit pourraient annuler votre droit utiliser le produit. Aprs avoir effectu un essai lquipement, il a t dtermin que celui-ci est conforme aux normes relatives un appareil numrique de classe B, selon la partie 15 des rgles de la FCC. Ces limites sont conues pour assurer une protection raisonnable contre les perturbations nuisibles dans une installa-
tion rsidentielle. Cet quipement produit, utilise et peut irradier une nergie haute frquence et, sil nest pas install conformment aux prsentes instruc-
tions, peut causer le brouillage des communications radio. Toutefois, il nexiste aucune garantie que le brouillage ne se produira pas dans une installation donne. Si cet quipement cause du brouillage de la rception dmissions de radio ou de tlvision, ce qui peut tre dtermin en lteignant et en le rallumant, il est conseill que lutilisateur essaie de corriger le problme en prenant lune ou plusieurs des mesures suivantes :
Rorientation de lantenne rceptrice. Augmentation de la distance entre le matriel et le rcepteur. Branchement du matriel sur un circuit autre que celui sur lequel le rcepteur est branch. Consulter le concessionnaire ou un technicien radio/
TV qualifi pour obtenir de laide. Ce dispositif est conforme la part 15 du Rglement de la FCC et les normes RSS dexemption de licence de lISED-Canada. Son fonctionnement est soumis aux conditions suivantes : (1) Cet appareil ne doit produire aucun brouillage prjudiciable ; et (2) cet appareil doit fonctionner en dpit de tout brouillage capt, y compris le brouillage pouvant mener un fonctionnement non dsir. Pour maintenir la conformit avec les directives dexposition aux RF de la FCC, Cet quipement doit tre install et utilis avec une distance minimale entre 20 cm le radiateur de votre corps: Utilisez uniquement lantenne fournie. 7 CORDONS DE RALLONGE Si lemploi dun cordon de rallonge est ncessaire, un cordon trois fils doit tre employ pour les outils mis la terre. Pour les outils double isolation, on peut employer indiffremment un cordon de rallonge deux ou trois fils. Plus la longueur du cordron entre loutil et la prise de courant est grande, plus le calibre du cordon doit tre lev. Lutilisation dun cordon de rallonge incorrectement calibr entrane une chute de voltage rsultant en une perte de puissance qui risque de dtriorer loutil. Reportez-vous au tableau ci-contre pour dterminer le calibre minimum du cor-
don. Moins le calibre du fil est lev, plus sa conduc-
tivit est bonne. Par exemple, un cordon de calibre 14 a une meilleure conductivit quun cordon de calibre 16. Lorsque vous utilisez plus dune rallonge pour couvrir la distance, assurez-vous que chaque cordon possde le calibre minimum requis. Si vous utilisez un seul cordon pour brancher plusieurs outils, additionnez le chiffre dintensit (ampres) inscrit sur la fiche signaltique de chaque outil pour obtenir le calibre minimal requis pour le cordon. Directives pour lemploi des cordons de rallonge Si vous utilisez une rallonge lextrieur, assurez-
vous quelle est marque des sigles W-A ( W au Canada) indiquant quelle est adquate pour usage extrieur. Assurez-vous que le cordon de rallonge est cor-
rectement cbl et en bonne condition. Remplacez tout cordon derallonge dtrior ou faites-le remettre en tat par une personne comptente avant de vous en servir. Tenez votre cordon de rallonge lcart des objets ranchants, des sources de grande chaleur et des endroits humides ou mouills. Calibres minimaux recommands pour les cordons de rallonge*
Longueur du cordon de rallonge (m) Fiche signaltique Ampres 0 - 2,0 2,1 - 3,4 3,5 - 5,0 5,1 - 7,0 7,1 - 12,0 12,1 - 16,0 16,1 - 20,0 15,2 18 18 18 16 14 12 10
* Bas sur sur une chute de voltage limite de 5 volts 150%
45,7 16 14 12 12
30,5 18 16 14 12 10
22,9 18 18 16 14 12 10
7,6 18 18 18 18 16 14 12 de lintensit moyenne de courant. ATTENTION RISQUE D'LECTROCUTION NE PAS OUVRIR AT T E N T I O N : P O U R R D U I R E L E R I S Q U E DLECTROCUTION, NE PAS RETIRER LE COU-
VERCLE (OU LE DOS). NE CONTIENT AUCUNE PICE RPARABLE PAR LUTILISATEUR. CONFIER L'ENTRETIEN UN PERSONNEL QUALIFI. Le symbole compos dun clair termin par une flche, lintrieur dun triangle quilatral, est destin avertir lutilisateur de la prsence dune tension dangereuse sans isolation lintrieur du produit dune force suffisante pour crer un risque dlectrocution des personnes. Le symbole dun point dexclamation, lintrieur dun tri-
angle quilatral, est destin avertir lutilisateur de la prsence dimportantes instructions de fonctionnement et dentretien (de service) dans la documentation accompag-
nant le dispositif. SPCIFICATIONS No de Cat. ................................................ 2952-20 Type de batterie ...........................................M18 Type de chargeur ........................................M18 Tension dentre CA ....................................120 CA Amprage de sortie CD ............................... 1,2 CD Tension dentre CD ..................................... 18 CD Tension de sortie CD .................................... 18 CD Amprage de sortie CC ...................................3 CA Tension de sortie USB-C ................................ 5 CD Amprage de sortie USB-C .............................3 CA ID de FCC......................................2AB9S-2952-20 Adaptateur de rechange .........................42-04-0021 Temprature ambiante de fonctionnement recommande ......... -10C 40C (14F 104F) PICTOGRAPHIE Volts Courant direct Ampres Frquence Lire le manuel dutilisation Prsence de consignes importantes dutilisation. ATTENTION Risque de choc lectrique. Federal Communications Commission Marque dapprobation pour le Mexique UL Listing Mark pour Canada et tats-unis MONTAGE DE L'OUTIL AVERTISSEMENT Ne recharger la batterie quavec le chargeur spci-
fi. Pour les instructions de charge spcifiques, lire le manuel dutilisation fourni avec le chargeur et les batteries. Insertion/Retrait de la batterie Pour retirer la batterie, enfoncer les boutons de dverrouillage et la tirer hors de loutil. AVERTISSEMENT Toujours retirer la batterie les fois que loutil est in-
utilis. Pour insrer la batterie, la glisser dans le corps de loutil. Sassurer quelle est fixe solidement. LISEZ ATTENTIVEMENT CES INSTRUCTIONS ET CONSERVEZ-LES POUR LES CONSULTER AU BESOIN. DESCRIPTION FONCTIONNELLE 1 2 3 4 5 6 7 8 9 10 11 13 12 1. Touche dalimentation 2. Bouton Bluetooth 3. Touche AM/FM 4. Bouton Preset
(Prrglage) 5. Bouton Clock
(Horloge) 6. Bouton EQ
(galisateur) 7. Afficheur 8. Bouton Play/Pause
(Lecture/pause) 14 15 16 9. Boutons de recherche/rglage 10. Touches de volume 11. Antenne 12. Compartiment des piles 13. Compartiment de pile de secours 14. Port de ladaptateur dalimentation 15. Couvercle du port 16. Prise dalimentation USB-C 8 AVERTISSEMENT Lemploi daccessoires autres que ceux qui sont expressment recommands pour cet outil peut comporter des risques. Alimentation La radio de chantier MILWAUKEE peut fonctionner soit sur des blocs-piles au lithium-ion M18 de MILWAUKEE, soit sur ladaptateur fourni. Quand elle est branche une prise secteur murale, le comparti-
ment des piles ne chargera pas les blocs-piles au lithium-ion M18 de MILWAUKEE. Indicateur de faible niveau des piles Lorsque la radio est alimente par un bloc-piles et que sa charge passe sous les 10 %, lindicateur de faible niveau des piles saffiche. Prise d'alimentation USB-C Il est possible dutiliser cette prise pour charger un appareil USB utilisant moins que 3 A de cou-
rant lectrique direct. La prise USB-C fournira de llectricit quand le bloc-piles est insr et la radio est allume, ou bien chaque fois que la radio est branche ladaptateur mural. REMARQUE : Tout dispositif utilisant un courant lectrique continu de plus de 3 A dclenchera une fonction de ramorage automatique et dsactivera la sortie dalimentation. Changement des piles de secours AVERTISSEMENT Les batteries peuvent lais-
ser fuir des produits chi-
miques ou risquent dexploser si elles ne sont pas utilises correctement. Prenez les prcau-
tions suivantes pour empcher un tel incident :
Assurez-vous que les bornes positive (+) et ngative (-) des batteries sont dans la position correcte. Nutilisez pas ensemble des batteries usages et neuves, ni des batteries de types diffrents. Nessayez pas de recharger des batteries non rechargeables. Si des produits chimiques fuyant de batteries touchent votre peau, lavez-la immdiatement avec de leau pour les enlever. Si des produits chimiques fuient sur lappareil, lavez soigneu-
sement celui-ci. Pour conserver les rglages pralables de station et lhorloge en fonction lorsque le bloc-piles est retir et la radio dbranche, il est ncessaire dutiliser deux piles AAA. 1. Retirer le bloc-piles et dbrancher la radio. 2. Retirer la vis et le couvercle du compartiment 3. Insrer deux (2) piles AAA en alignant les bornes positives (+) et les bornes ngatives (-). 4. Replacer le couvercle du compartiment des piles des piles. et la vis. MANIEMENT AVERTISSEMENT Afin de rduire le risque de choc lectrique ou dincendie, nexposez pas cette radio la pluie ni lhumidit. Mise en marche/arrt et rglage du volume Brancher le cordon dans la prise CA approprie ou installer un bloc-piles. Appuyer sur la touche dalimentation pour allumer et teindre la radio. La station de radio (frquence) saffiche. Pour afficher lheure, appuyer sur le bouton dhorloge. Le volume reprend son dernier rglage. REMARQUE : Lorsque le radio fonctionne sur pile, la luminosit de laffichage diminue aprs 5 minutes pour rduire lutilisation dnergie. Appuyer sur les touches de volume pour augmenter ou rduire le volume. Rglage de lhorloge 1. Appuyer sur le bouton CLOCK (Horloge) et le tenir enfonc jusqu ce que lheure commence clignoter. 2. Utiliser les boutons 3. Appuyer de nouveau sur le bouton CLOCK pour changer pour changer lheure.
(Horloge). Utiliser le bouton les minutes. 4. Appuyer de nouveau sur le bouton CLOCK
(Horloge) pour enregistrer les donnes. Rglage de lgalisateur Pour rgler manuellement les graves et les aigus (Bass/Treble), appuyer sur le bouton EQ (galisateur). Rgler les graves laide des boutons
. Appuyer de nouveau sur le bouton EQ (galisateur) pour rgler les aigus laide des boutons
. Slection de la bande Appuyer sur le bouton MODE (Mode) pour slectionner la bande AM , FM ou AUX
(Auxiliaire). Syntonisation (Recherche et balayage) Appuyer sur les boutons et les tenir enfoncs pour faire dfiler la bande. Lorsque la station dsi-
re est trouve, la recherche est arrte. Utiliser le bouton SCAN (Balayage) pour continuer de faire dfiler les stations, tout en faisant une pause chacune dentre elles. Stations PRRGLES Pour prrgler des stations :
1. Syntoniser la station dsire. 2. Appuyer sur le bouton PRESET (Prrglages) jusqu ce que lindicateur PRESET (Prr-
glages) apparaissant sur lafficheur commence clignoter. 3. Utiliser les boutons pour slectionner lemplacement prrgl de la station. Dix emplace-
ments (0 9) sont disponibles. 4. Appuyer sur le bouton PRESET (Prrglages) pour enregistrer lemplacement. Pour syntoniser une station prrgle :
Appuyer sur le bouton PRESET (Prrglages) et le relcher pour faire dfiler les stations prrgles. 9 Utilisation du Bluetooth Pour entrer dans le mode Bluetooth, appuyer sur la touche
. Jumelage Au cas o aucun appareil Bluetooth ne serait connect, le jumelage par Bluetooth commencera automatiquement et licne clignotera sur lcran. La radio continuera chercher un signal durant 3 minutes. Pour jumeler manuellement un appareil, enfoncer Bluetooth jusqu ce que commence la touche clignoter. clignote, slectionner loption Pendant que Milwaukee sur lappareil fonction Bluetooth. Une sonnerie sera entendue et licne saffichera sur lcran de la radio quand lappareil aura t russi se jumeler correctement la radio. Connexion Pour entrer dans le mode Bluetooth, appuyer sur la touche Quand la radio trouve un appareil Bluetooth jumel,
. saffichera sur lcran de la radio. Si la connexion entre la radio et lappareil Bluetooth se perd, la radio tentera, durant 3 minutes, de se reconnecter automatiquement. Commande Quand vous diffusez de la musique sur la radio travers un appareil Bluetooth, utiliser la touche pour en lire et mettre en pause. Utiliser les touches pour changer de piste. 10 ENTRETIEN AVERTISSEMENT Pour minimiser les risques de blessures corporelles, dbranchez le chargeur et retirez la batterie du chargeur ou de loutil avant dy effectuer des travaux dentretien. Ne jamais dmonter le bloc-
piles, le chargeur ou la outil, sauf si ces instruc-
tions indiquent faire une telle chose. Pour toute autre rparation, contacter un centre de service de MILWAUKEE. Entretien de loutil Gardez loutil en bon tat en adoptant un programme dentretien ponctuel. Inspectez votre outil pour des questions telles que le bruit excessif, de grippage des pices mobiles, de pices casses ou toute autre condition qui peut affecter le fonctionnement de l'outil. Retournez votre outil un centre de service MILWAUKEE accrdit pour obtenir le service. Aprs une priode pouvant aller de 6 mois un an, selon lusage, retournez votre outil un centre de service MILWAUKEE accrdit pour d'inspection. Si loutil ne dmarre pas ou ne fonctionne pas pleine puissance alors quil est branch sur une batterie compltement charge, nettoyez les points de contact entre la batterie et loutil. Si loutil ne fonctionne toujours pas correctement, renvoyez loutil, le chargeur et la batterie un centre de service MILWAUKEE accrdit. AVERTISSEMENT Pour minimiser les risques de blessures ou de dom-
mages l'outil, n'immergez jamais l'outil, la bat-
terie ou le chargeur et ne laissez pas de liquide s'y infiltrer. Nettoyage Dbarrassez les tous vents des dbris et de la poussire. Gardez les outil propres, sec et ex-
emptes dhuile ou de graisse. Le nettoyage doit se faire avec un linge humide et un savon doux. Certains nettoyants tels lessence, la trbenthine, les diluants laque ou peinture, les solvants chlors, lammoniaque et les dtergents dusage domestique qui en contiennent pourraient dtriorer le plastique et lisolation des pices. Ne laissez jamais de solvants inflammables ou combustibles auprs des outils. Rparations Pour les rparations, retournez outil, batterie et chargeur en entier au centre-service autoris le plus prs. ACCESOIRES AVERTISSEMENT Lutilisation dautres ac-
cessoires que ceux qui sont spcifiquement recommands pour cet outil peut comporter des risques. Pour une liste complte des accessoires, visiter le site internet www.milwaukeetool.com ou contactez un distributeur. SERVICE - CANADA Milwaukee Tool (Canada) Ltd 1.877.948.2360 Monday-Friday, 7:00 AM - 4:30 PM CST www.milwaukeetool.ca GARANTIE LIMITE -
AUX TATS-UNIS ET AU CANADA Cet outil lectrique MILWAUKEE* est garanti lacheteur dorigine uniquement par un distributeur agr de MILWAUKEE dtre exempt de vice du matriau et de fabrication. Sous rserve de certaines exceptions, MILWAUKEE rparera ou remplacera toute pice de cet outil lectrique qui, aprs examen par MILWAUKEE, est affecte dun vice de matriau ou de fabrication pendant une priode dun (1) an aprs la date dachat, sauf indication contraire. Il faudra retourner loutil lectrique un centre de service en usine MILWAUKEE ou un poste dentretien agr MILWAUKEE, en port prpay et assur. Une copie de la preuve dachat doit tre prsente lors du retour du produit. Cette garantie ne couvre pas les dommages que MILWAUKEE dtermine dtre causs par des rparations ou des tentatives de rparation par quiconque dautre que le personnel agr par MILWAUKEE, des utilisations incorrectes, des altrations, des utilisations abusives, une usure normale, une carence dentretien ou les accidents. Usure normale : Par rapport plusieurs outils lectriques, il faut remplacer et entretenir leurs pices afin de jouir de leur rendement optimal. Cette garantie ne couvre pas les cas de rparation lorsque la vie utile normale de la pice sest termine, incluant, sans sy limiter, les mandrins, les balais, les cbles, les patins de scie, les brides de lame, les joints toriques, les embouts, les butoirs, les lames dentranement, les pistons, les percuteurs, les poussoirs et les rondelles de protec-
tion de butoir.
*Cette garantie ne couvre ni les blocs-piles ni tous les outils lectriques. Veuillez vous reporter aux autres garanties diffrentes disponibles pour ces produits. La priode durant lequel la garantie est valable pour la lumire DEL de la lampe de travail DEL (49-24-0171) et lampoule transforme DEL (49-81-0090) est dune dure gale la vie utile du produit en raison des limites au-dessus. Si la lumire DEL ou lampoule transforme DEL tombent en panne durant lutilisation normale, la pice sera remplace gratuitement. Linscription de la garantie nest pas ncessaire pour bnficier de la garantie en vigueur dun outil lectrique MILWAUKEE. La date de fabrication du produit servira tablir la priode de garantie si aucune preuve dachat nest fournie lorsquune demande de service sous garantie est faite. LACCEPTATION DES RECOURS EXCLUSIFS DE RPARATION ET DE REMPLACEMENT DCRITS PAR LA PRSENTE EST UNE CON-
DITION DU CONTRAT DACHAT DE TOUT PRODUIT MILWAUKEE. SI VOUS NACCEPTEZ PAS CETTE CONDITION, VOUS NE DEVEZ PAS ACHETER LE PRODUIT. EN AUCUN CAS MILWAUKEE NE SAURAIT TRE RESPONSABLE DE TOUT DOMMAGE ACCES-
SOIRE, SPCIAL OU INDIRECT, DE DOMMAGES-INTRTS PUNITIFS OU DE TOUTE DPENSE, DHONORAIRES DAVOCATS, DE FRAIS, DE PERTE OU DE DLAIS ACCESSOIRES TOUT DOMMAGE, DFAILLANCE OU DFAUT DE TOUT PRODUIT, Y COMPRIS NOTAMMENT LES PERTES DE PROFIT. CERTAINS TATS ET PROVINCES NE PERMETTANT L'EXCLUSION OU LA LIMITATION DES DOMMAGES DIRECTS OU INDIRECTS, LES RESTRICTIONS CI-DESSOUS PEUVENT NE PAS TRE APPLI-
CABLES. CETTE GARANTIE EST EXCLUSIVE ET REMPLACE TOUTE AUTRE GARANTIE EXPRESSE, QUELLE SOIT VERBALE OU CRITE. DANS LA MESURE PERMISE PAR LA LOI, MILWAUKEE RENONCE TOUTE GARANTIE IMPLICITE, Y COMPRIS, SANS SY LIMITER, TOUTE GARANTIE IMPLICITE DE COMMERCIA-
BILIT OU DADAPTATION UNE UTILISATION OU UNE FIN PARTICULIRE. DANS LA MESURE O UNE TELLE STIPULATION DEXONRATION NEST PAS PERMISE PAR LA LOI, LA DURE DE CES GARANTIES IMPLICITES EST LIMITE LA PRIODE APPLICABLE DE LA GARANTIE EXPRESSE, TELLE QUE CELA EST DCRIT PRCDEMMENT. CERTAINES PROVINCES NE PERMETTANT PAS DE LIMITATION DE DURE DES GARANTIES IMPLICITES, LES RESTRICTIONS CI-DESSUS PEUVENT NE PAS TRE APPLICABLES. LA PRSENTE CONFRE LUTILISATEUR DES DROITS LGAUX PARTICULIERS ; IL BNFICIE GALEMENT DAUTRES DROITS QUI VARIENT DUNE PROVINCE LAUTRE. Cette garantie sapplique uniquement aux produits vendus aux tats-
Unis et au Canada. Veuillez consulter longlet Trouver un centre Service , dans la section Pices et service du site web de MILWAUKEE, ladresse www.milwaukeetool.com, ou composer le 1.800.SAWDUST
(1.800.729.3878) afin de trouver le centre de service le plus proche dans votre rgion pour lentretien, sous garantie ou non, de votre outil lectrique MILWAUKEE. INSTRUCCIONES IMPORTANTES DE SEGURIDAD ADVERTENCIA LEA, ENTIENDA Y SIGA TODAS LAS INSTRUCCIONES. El incumplimiento de todas las advertencias indicadas a continuacin, puede resultar en choque elctrico, incendio o lesiones personales graves. CONSERVE ESTAS INSTRUCCIONES. Lea estas instrucciones. Guarde estas instrucciones. Ponga atencin a todas las advertencias. Siga todas las instrucciones. No use este aparato cerca del agua. Limpie nicamente con un pao seco. No instale cerca de ninguna fuente de calor tal como radiadores, registros de calefaccin, estu-
fas u otros aparatos (incluyendo amplificadores que producen calor). Use nicamente aditamentos/accesorios espe-
cificados por el fabricante. Use nicamente con el carrito, banco, trpode, soporte o mesa especificado por el fabricante o vendido con el aparato. Cuando use un carrito, tenga cuidado al mover la combinacin del car-
rito/aparato para evitar lesiones debido a una volcadura. Desconecte este aparato durante tormentas elctricas o cuando no se use por largos pero-
dos de tiempo. Para dar servicio al aparato, envelo al personal de servicio calificado. El servicio se requiere cu-
ando el aparato se ha daado de alguna manera, como cuando el cable de corriente o el enchufe est daado, se derram lquido o cayeron ob-
jetos sobre el aparato, este ha estado expuesto a lluvia o humedad, no funciona con normalidad o se cay. ADVERTENCIA Para reducir el riesgo de un incendio o descarga elc-
trica, no exponga este aparato a la lluvia o hume-
dad. Conecte el cable de corriente a un tomacorriente de fcil acceso para permitir que el aparato se desconecte rpidamente. Un radio operado por bateras con bateras integradas o bateras independientes debe recar-
garse nicamente con el cargador especificado para las bateras. Un cargador que pudiera ser adecuado para un tipo de batera puede crear un riesgo de incendio cuando se usa con otra batera. Use el radio operado por batera nicamente con las bateras especficamente designadas. El uso de otras bateras puede crear un riesgo de incendio. Cuando las bateras no estn en uso, mantn-
galas alejadas de otros objetos metlicos como:
sujetapapeles, monedas, llaves, clavos, tornillos u otros objetos metlicos pequeos que pueden conectar una terminal con la otra. Causar un cortocircuito al juntar las terminales de las bateras puede causar chispas, quemaduras o un incendio. Evite el contacto corporal con superficies co-
nectadas a tierra tales como tuberas, radiadores, estufas y refrigeradores. Existe un mayor riesgo de descarga elctrica si su cuerpo est aterrizado. 11 Use nicamente el conector del adaptador incluido. Nunca desarme el radio ni intente recablear el sistema elctrico del mismo. No exponga este aparato a escurrimientos y salpicaduras ni coloque objetos llenos de lquido sobre esta unidad. REGLAS ESPECIFICAS DE SEGURIDAD Vlgase siempre de su sentido comn y sea cuidadoso cuando utilice herramientas. No es posible anticipar todas las situaciones que podran tener un desenlace peligroso. No utilice esta her-
ramienta si no entiende estas instrucciones de uso o si considera que el trabajo a realizar supera sus capacidades, comunquese con Milwaukee Tool o con un profesional capacitado para recibir capacitacin o informacin adicional. Conserve las etiquetas y las placas nominales. Contienen informacin importante. Si son ilegibles o no estn presentes, comunquese con un centro de servicio MILWAUKEE para obtener un reemplazo gratuito. Comisin Federal de Comunicaciones De conformidad con la parte 15.21 de las Reglas de la FCC, se le advierte que los cambios o modificaciones no aprobados expresa-
mente por la parte responsable del cumplimiento podran anular su autoridad para operar el producto. Este equipo ha sido probado y se ha encontrado que cumple con los lmites de un dispositivo digital de Clase B, en cumplimiento con la parte 15 de las reglas de la FCC. Estos lmites estn diseados para proporcionar proteccin razonable contra la interferencia nociva en una instalacin residencial. Este equipo genera, usa y puede irradiar energa de radiofrecuencia y, si no se instala y se utiliza de acuerdo con las instrucciones, puede ocasionar in-
terferencia nociva con las comunicaciones por radio. Sin embargo, no existe garanta de que no ocurrir interferencia en una instalacin en particular. Si este equipo ocasiona interferencia nociva con la recep-
cin de radio o televisin que pueda determinarse encendiendo y apagando el equipo, se anima al usuario a intentar corregir la interferencia mediante una o ms de las siguientes medidas:
Reorientar o reubicar la antena receptora. Aumentar la distancia entre el equipo y el receptor. Conectar el equipo a un tomacorriente que est en un circuito diferente a donde est conectado el receptor. Consulte al distribuidor o a un tcnico experimen-
tado de radio/TV para solicitar ayuda Este dispositivo cumple con la parte 15 de las normas de la FCC y los estndares RSS exentos de licencia de ISED-Canada. La operacin est sujeta a las sigu-
ientes dos condiciones: (1) este dispositivo no debe ocasionar interferencia nociva y (2) este dispositivo debe aceptar cualquier interferencia que se reciba, incluyendo la interferencia que pueda ocasionar operacin indeseada. Para mantener el cumplimiento de las pautas de exposicin a RF de la FCC, este equipo debe insta-
larse y operarse con una distancia mnima entre 20 cm del radiador de su cuerpo: Utilice solo la antena suministrada. 12 EXTENSIONES ELECTRICAS Las herramientas que deben conectarse a tierra cuentan con clavijas de tres patas y requieren que las extensiones que se utilicen con ellas sean tambin de tres cables. Las herramientas con doble aislamiento y clavijas de dos patas pueden utilizarse indistintamente con extensiones de dos a tres cables. El calibre de la extensin depende de la distancia que exista entre la toma de la corriente y el sitio donde se utilice la herramienta. El uso de extensiones in-
adecuadas puede causar serias cadas en el voltaje, resultando en prdida de potencia y posible dao a la herramienta. La tabla que aqu se ilustra sirve de gua para la adecuada seleccin de la extensin. Mientras menor sea el nmero del calibre del cable, mayor ser la capacidad del mismo. Por ejemplo, un cable calibre 14 puede transportar una corriente mayor que un cable calibre 16. Cuando use mas de una extensin para lograr el largo deseado, asegrese que cada una tenga al menos, el mnimo tamao de cable requerido. Si est usando un cable de extensin para mas de una herramienta, sume los amperes de las varias placas y use la suma para determinar el tamao mnimo del cable de extensin. Guas para el uso de cables de extensin Si est usando un cable de extensin en sitios al aire libre, asegrese que est marcado con el sufijo W-A (W en Canad) el cual indica que puede ser usado al aire libre. Asegrese que su cable de extensin est cor-
rectamente cableado y en buenas condiciones elctricas. Cambie siempre una extensin daada o hgala reparar por una persona calificada antes de volver a usarla. Proteja su extensin elctrica de objetos cortantes, calor excesivo o areas mojadas. Calibre mnimo recomendado para cables de extensiones elctricas*
Amperios
(En la placa) 0 - 2,0 2,1 - 3,4 3,5 - 5,0 5,1 - 7,0 7,1 - 12,0 12,1 - 16,0 16,1 - 20,0 Largo de cable de Extensin en (m) 45,7 22,9 16 18 14 18 12 16 12 14
12
10
15,2 18 18 18 16 14 12 10 30,5 18 16 14 12 10
7,6 18 18 18 18 16 14 12
* Basado en limitar la cada en el voltaje a 5 volts al 150%
de los amperios. ATENCIN RIESGO DE DESCARGA ELCTRICA NO ABRIR PRECAUCIN: PARA REDUCIR EL RIESGO DE UNA DESCARGA ELCTRICA, NO QUITE LA CUBIERTA
(NI LA TAPA TRASERA). EN EL INTERIOR NO HAY PIEZAS QUE EL USUARIO PUEDA REPARAR. ENVE A SERVICIO CON PERSONAL DE SERVICIO CALIFICADO. El smbolo del rayo con punta de flecha dentro de un trin-
gulo equiltero pretende alertar al usuario de la presencia de "voltaje peligroso" en el interior del producto que puede ser de magnitud suficiente para constituir un riesgo de descarga elctrica para las personas. El signo de exclamacin dentro de un tringulo equiltero pretende alertar al usuario de la presencia de instrucciones importantes de operacin y mantenimiento (servicio) con-
tenidas en los materiales impresos que acompaan al aparato. LEA Y GUARDE TODAS LAS INSTRUCCIONES PARA FUTURAS REFERANCIAS. DESCRIPCION FUNCIONAL 1 2 3 4 5 6 7 8 9 10 SIMBOLOGA Volts Corriente continua Ampres Frquence 11 13 12 1. Botn de encendido 2. Botn de Bluetooth 3. Botn "AM/FM"
4. Botn de programacin 5. Botn de reloj 6. Botn de ecualizador 7. Pantalla 8. Botn de reproducir/pausa 14 15 16 9. Botones de bsqueda/ajuste 10. Botones de volumen 11. Antena 12. Compartimiento de bateras 13. Compartimiento de la batera de reserva 14. Puerto del adaptador de potencia 15. Tapa del puerto 16. Tomacorriente USB-C Leer el manual del operador Presencia de instrucciones de funcionamiento importantes. ATENCIN Riesgo de choque elctrico. Federal Communications Commission Marca de aprobacin para Mxico UL Listing Mark para Canad y Estados Unidos ESPECIFICACIONES Cat. No.. ................................................... 2952-20 Volts.............................................................. 18 CD Tipo de batera .............................................M18 Tipo de cargador ..........................................M18 Voltios de entrada CA ..................................120 CA Amperaje de entrada CA ............................. 1,2 CD Voltios de entrada CC................................... 18 CD Voltios de salida CC ..................................... 18 CD Amperaje de salida CC....................................3 CA Voltios de salida USB ..................................... 5 CD Amperios de salida USB..................................3 CA ID de FCC......................................2AB9S-2952-20 Adaptador de repuesto ...........................42-04-0021 Temperatura ambiente recomendada para operar .............. -10C a 40C (14F a 104F) ENSAMBLAJE ADVERTENCIA Recargue la batera slo con el cargador especificado para ella. Para instrucciones especficas sobre cmo cargar, lea el manual del operador sumin-
istrado con su cargador y la batera. Como se inserta/quita la batera en la herramienta Para retirar la batera, presione los botones de liberacin y jale de la batera para sacarla de la herramienta. ADVERTENCIA Siempre retire la batera cada vez que la herramienta no est en uso. Para introducir la batera, deslcela en el cuerpo de la herramienta. Asegrese de que quede bien firme en su posicin. 13 OPERACIN ADVERTENCIA Para reducir el riesgo de in-
cendio o choque elctrico, no exponga esta radio a la lluvia ni a la humedad. Encendido/apagado y control del volumen Conecte el cable a un tomacorriente CA adecuado o instale una batera. Oprima el botn de encendido para encender y apagar el radio. Aparece la estacin de radio (frecuencia). Para mostrar la hora, presione el botn CLOCK (reloj). El volumen se restaura en el ltimo ajuste. NOTA: Cuando el radio/ cargador est funcionando con bateras, se disminuir la intensidad de ilumi-
nacin de la pantalla despus de 5 minutos para reducir el uso de energa. Oprima los botones de volumen para aumentar o reducir el volumen. Ajuste del reloj 1. Presione y sostenga el botn CLOCK (reloj) hasta que empiece a destellar la hora. 2. Use los botones 3. Presione de nuevo el botn CLOCK (reloj). Use los para cambiar la hora. botones para cambiar los minutos. 4. Presione de nuevo el botn CLOCK (reloj) para guardar la hora. Configuracin del reloj 1. Presione y no suelte el botn CLOCK (reloj) hasta que la hora comience a parpadear. 2. Use los botones 3. Presione nuevamente el botn CLOCK (reloj). para cambiar los minutos. 4. Presione nuevamente el botn CLOCK (reloj) para para cambiar la hora. Use los botones guardar los cambios. Ajuste del ecualizador Para ajustar manualmente los sonidos Bass/
Treble (bajos/agudos), presione el botn EQ (ecu-
alizador). Configure el sonido de los bajos con los botones
. Presione nuevamente el botn EQ
(ecualizador) para configurar el sonido de los agu-
. dos, con los botones Seleccin de banda Presione el botn MODE (modo) para seleccionar AM, FM o AUX (auxiliar). Sintonizacin (bsqueda y escaneado) Presione y no suelte los botones para realizar la bsqueda en toda la banda. Cuando se encuentra una estacin, se detiene la bsqueda. Use el botn SCAN (escanear) para continuar buscando por las estaciones, haciendo una pausa en cada una de ellas. ADVERTENCIA Utilice nicamente acceso-
rios especficamente reco-
mendados para esta herramienta. El uso de ac-
cesorios no recomendados podra resultar peligroso. Potencia El radio de obra MILWAUKEE puede funcionar con bateras de ion de litio M18 de MILWAUKEE o con el adaptador incluido. Cuando se conecta a un tomacorrientes de pared, el compartimento de bat-
eras no cargar las bateras de ion de litio M18 de MILWAUKEE. Indicador de batera baja Cuando el radio est funcionando con un paquete de bateras y su carga sea menor al 10%, aparecer el indicador de batera baja. Tomacorriente USB Puede usar este tomacorrientes para cargar un dispositivo USB que use menos de 3 A de corriente elctrica directa. El tomacorrientes USB-C generar energa cuando se haya insertado la batera y el radio est encendido o bien, en cualquier momento en que el radio se conecte al adaptador de pared. NOTA: Cualquier dispositivo que use ms de 3 A de corriente elctrica CD activar una funcin de restablecimiento automtico y deshabilitar la salida del tomacorriente. Cambio de las bateras de repuesto ADVERTENCIA La bateras pueden derramar productos qumicos o pu-
eden explotar si se las usa errneamente. Es necesario tomar las siguientes precauciones para evitar un incidente de este tipo:
Asegrese de que los terminales positivo (+) y negativo (-) de la batera estn colocados cor-
rectamente. No mezcle bateras usadas con bateras nuevas, ni mezcle tipos diferentes de bateras. No intente recargar bateras no recargables. Si su piel entra en contacto con las sustancias qumicas de las bateras, lvese inmediatamente con agua. Si las sustancias qumicas penetran en la unidad, limpie completamente la unidad. Para mantener las estaciones preconfiguradas y la hora del reloj cuando se retira la batera y se desenchufa la radio, se requieren 2 bateras AAA. 1. Retire la batera y desenchufe la radio. 2. Retire el tornillo y la tapa de las bateras. 3. Introduzca dos (2) bateras AAA, segn las marcas correspondientes, positivo (+) y negativo (-). 4. Vuelva a colocar la tapa de las bateras y el tornillo. 14 MANTENIMIENTO ADVERTENCIA Para reducir el riesgo de una lesin, desconecte siempre la herramienta antes de darle cualquier manten-
imiento. Nunca desarme la batera, el cargador o la herramienta, salvo que as lo indiquen estas instrucciones. Comunquese con un centro de servicio de MILWAUKEE para todas las dems reparaciones. Mantenimiento de las herramientas Adopte un programa regular de mantenimiento y mantenga su herramienta en buenas condiciones. Inspeccione la herramienta para problemas como ruidos indebidos, desalineadas o agarrotadas de partes mviles, piezas rotas o cualquier otra condicin que pueda afectar el funcionamiento de la herramienta. Enve su herramienta al Centro de Servicio MILWAUKEE para reparacin. Despus de 6 meses a un ao, dependiendo del uso dado, enve su herramienta al Centro de Servicio MILWAUKEE ms cercano para la inspeccin. Si la herramienta no arranca u opera a toda su potencia con una batera completamente cargada, limpie, con una goma o borrador, los contactos de la batera y de la herramienta. Si aun asi la herramienta no trabaja correctamente, regrsela, con el cargador y la batera, a un centro de servicio MILWAUKEE. ADVERTENCIA Para reducir el riesgo de le-
siones, descarga elctrica o dao a la herramienta, nunca la sumerja en lquidos ni permita que estos fluyan dentro de la misma. Limpieza Limpie el polvo y suciedad de las cualquier ventilas. Mantenga los herramienta, limpios, secos y libres de aceite o grasa. Use solo jabn neutro y un trapo hmedo para limpiar, ya que algunos substancias y solventes limpiadores son dainos a los plsticos y partes aislantes. Algunos de estos incluyen: gasolina, turpentina,thner, lacas, thner para pinturas, solven-
tes para limpieza con cloro, amonaco y detergentes caseros que tengan amonia. Nunca usa solventes in-
flamables o combustibles cerca de una herramienta. Reparaciones Si su herramienta, batera o cargador estn daados, envela al centro de servicio autorizado ms cercano. ACCESORIOS ADVERTENCIA Utilice slo los accesorios especficamente recomenda-
dos. Otros accesorios puede ser peligroso. Para una lista completa de accessorios, visite nuestro sitio en Internet: www.milwaukeetool.com o pngase en contacto con un distribuidor. Estaciones preconfiguradas Para configurar las estaciones preconfiguradas:
1. Sintonice la estacin deseada. 2. Presione y no suelte el botn PRESET (pre-
configurar) hasta que el indicador de PRESET
(preconfigurar), que se muestra en la pantalla, empiece a parpadear. 3. Use los botones para seleccionar la ubicacin preseleccionada para la estacin. Hay diez ubica-
ciones (0-9) disponibles. 4. Presione el botn PRESET (preconfigurar) para guardar la ubicacin. Para sintonizar una estacin preconfigurada:
Presione y suelte el botn PRESET (preconfigurar) para ir por las estaciones preconfiguradas. Uso de Bluetooth
. a parpadear. parpadear en la pantalla. Para entrar al modo Bluetooth, oprima el botn Emparejamiento Si no est conectado ningn dispositivo Bluetooth, el emparejamiento Bluetooth comenzar automti-
camente y el cono El radio seguir buscando una seal durante 3 minutos. Para emparejar manualmente un dispositivo, man-
tenga oprimido el botn de Bluetooth hasta que empiece Mientras parpadea, seleccione la opcin
"Milwaukee" en el dispositivo con funcionalidad Bluetooth. Cuando el dispositivo haya logrado emparejarse con el radio correctamente, se escuchar un tono y el cono aparecer en la pantalla del dispositivo. Conexin Para entrar al modo Bluetooth, oprima el botn
. Cuando el radio encuentre un dispositivo Bluetooth emparejado, aparecer en la pantalla del radio. Si se pierde la conexin entre el radio y el dispositivo Bluetooth, el radio intentar reconectarse automti-
camente durante 3 minutos. Control Al transmitir msica en el radio mediante un disposi-
tivo Bluetooth, use el botn para reproducir y pausar la msica. Use los botones para cambiar de pista. 15 SOPORTE DE SERVICIO - MEXICO CENTRO DE ATENCION A CLIENTES Techtronic Industries Mexico, S.A. de C.V. Av. Presidente Masarik 29 Piso 7 11560 Polanco V Seccion Miguel Hidalgo, Distrito Federal, Mxico 01 (800) 030-7777 o (55) 4160-3540 Lunes a Viernes (9am a 6pm) O contctanos en www.milwaukeetool.com.mx GARANTA LIMITADA -
E.U.A. Y CANAD Esta herramienta elctrica de MILWAUKEE* est garantizada, ante el comprador original nicamente, por parte de un distribuidor autorizado MILWAUKEE, de que no tenga material y mano de obra defectuosos. Sujeto a ciertas excepciones, MILWAUKEE reparar o sustituir cualquier pieza de esta herramienta elctrica que tenga defectos de material o mano de obra segn lo determine MILWAUKEE mediante una revisin, por un periodo de un (1) ao despus de la fecha de compra a menos que se indique lo contrario. Al devolver la herramienta elctrica a un centro de servicio de fbrica de MILWAUKEE o a una estacin de servicio autorizada de MILWAUKEE, es necesario que la devolucin se haga con flete pagado por adelantado y asegurado. Se debe incluir una copia del comprobante de compra con el producto devuelto. Esta garanta no aplica a daos que MILWAUKEE determine que son ocasionados por reparaciones o intentos de reparaciones realizados por una persona que no sea personal autorizado de MILWAUKEE, uso indebido, alteraciones, maltrato, desgaste normal, falta de mantenimiento o accidentes. Desgaste normal: Muchas herramientas elctricas necesitan cambios de piezas y mantenimiento peridicos para alcanzar su mximo ren-
dimiento Esta garanta no cubre la reparacin cuando el uso normal ha agotado la vida til de una pieza, incluyendo, entre otros, mandriles, cepillos, cables, zapatas de la sierra, abrazaderas de la hoja, juntas tricas, sellos, protectores, hojas de accionamiento, pistones, herrajes, levantadores y arandelas de cubierta de los protectores.
*La presente garanta no cubre ni las bateras ni todas las herramientas elctricas. Consulte las distintas garantas independientes que estn disponibles para estos productos. La vigencia de la garanta de la luz LED en la lmpara LED de trabajo
(49-24-0171) y el foco mejorado de LED (49-81-0090) es la misma que la vida til del producto sujeto a las limitaciones anteriores. Si la luz LED o el foco mejorado LED presentan fallas durante su suso normal, se cambiar la pieza sin costo. No es necesario realizar el registro de la garanta para recibir la garanta correspondiente a un producto de herramienta elctrica de MILWAUKEE. La fecha de fabricacin del producto servir para determinar la vigencia de la garanta en caso de que no presente ningn comprobante de compra al solicitar el servicio en garanta. LA ACEPTACIN DE LOS RESARCIMIENTOS EXCLUSIVOS DE REPARACIN Y SUSTITUCIN AQU DESCRITOS ES UNA CONDICIN DEL CONTRATO EN CUANTO A LA COMPRA DE TODO PRODUCTO DE MILWAUKEE. SI USTED NO ACEPTA ESTA CONDICIN, NO DEBE COMPRAR EL PRODUCTO. MILWAUKEE NO SER RESPONSABLE EN NINGN CASO DE DAOS INCIDEN-
TALES, ESPECIALES, EMERGENTES O PUNITIVOS NI DE NINGN COSTO, HONORARIOS DE ABOGADOS, GASTOS, PRDIDAS O DEMORAS QUE SUPUESTAMENTE SEAN CONSECUENCIA DE ALGN DAO, FALLA O DEFECTO DE ALGUNO DE LOS PRO-
DUCTOS, INCLUYENDO, ENTRE OTROS, RECLAMACIONES POR PRDIDA DE UTILIDADES. ALGUNOS ESTADOS NO PERMITEN LA EXCLUSIN O LIMITACIN DE RESPONSABILIDAD POR DAOS INCIDENTALES O EMERGENTES, POR LO QUE LA ANTERIOR LIMITACIN O EXCLUSIN PODRA NO APLICARSE EN SU CASO. ESTA GARANTA ES EXCLUSIVA Y SUSTITUYE TODAS LAS DEMS GARANTAS EXPRESAS, SEAN ESTAS ESCRITAS U ORALES. HASTA DONDE PERMITA LA LEY, MILWAUKEE DESCON-
OCE CUALQUIER GARANTA IMPLCITA, INCLUYENDO, SIN LIMIT-
ACIN, CUALQUIER GARANTA IMPLCITA DE COMERCIABILIDAD O IDONEIDAD PARA UN FIN O USO ESPECFICO; HASTA EN QUE DICHO DESCONOCIMIENTO NO SEA PERMITIDO POR LA LEY, DICHAS GARANTAS IMPLCITAS SE LIMITAN A LA DURACIN DE LA GARANTA EXPRESA CORRESPONDIENTE SEGN LO ARRIBA DESCRITO. ALGUNOS ESTADOS NO PERMITEN LIMITACIONES EN LA VIGENCIA DE UNA GARANTA IMPLCITA, POR LO QUE LA ANTERIOR LIMITACIN PUDIERA NO APLICAR A USTED. ESTA GARANTA LE CONFIERE DERECHOS JURDICOS ESPECFICOS Y USTED PODRA, ADEMS, TENER OTROS DERECHOS QUE VARAN SEGN EL ESTADO. Esta garanta aplica nicamente a los productos vendidos en EE. UU. y Canad. Consulte la pestaa Bsqueda de centro de servicio en la seccin de Partes y servicio del sitio web de MILWAUKEE en www.milwaukeetool. com o llame al 1.800.SAWDUST (1.800.729.3878) para localizar su centro de servicio ms cercano para darle servicio, con y sin garanta, a una herramienta de MILWAUKEE. PLIZA DE GARANTA - VALIDA SOLO PARA MXICO, AMRICA CENTRAL Y EL CARIBE La garanta de TECHTRONIC INDUSTRIES es por 1 ao a partir de la fecha original de compra. Esta tarjeta de garanta cubre cualquier defecto de material y mano de obra en ese Producto. Para hacer vlida esta garanta, presente esta tarjeta de garanta, cerrada/sellada por el distribuidor o la tienda donde compr el pro-
ducto, al Centro de Servicio Autorizado (ASC). O, si esta tarjeta no se ha cerrado/sellado, presente la prueba original de compra a ASC. Llame 55 4160-3547 para encontrar el ASC ms cercano, para ser-
vicio, partes, accesorios o componentes. Procedimiento para hacer vlida esta garanta Lleve el producto a ASC, junto con la tarjeta de garanta cerrada/
sellada por el distribuidor o la tienda donde compr el producto, y cualquier pieza o componente defectuoso se reemplazar sin costo para usted. Cubriremos todos los costos de flete con relacin a este proceso de garanta. Excepciones Esta garanta no tendr validez en las siguientes situaciones:
a) Cuando el producto se use de manera distinta a la que indica el manual del usuario final o de instrucciones. b) Cuando las condiciones de uso no sean normales. c) Cuando otras personas no autorizadas por TECHTRONIC INDUSTRIES modifiquen o reparen el producto. Nota: si el juego de cables est daado, tiene que reemplazarse en un Centro de Servicio Autorizado para evitar riesgos elctricos. CENTRO DE SERVICIO Y ATENCIN Llame al 55 4160-3547 IMPORTADO Y COMERCIALIZADO POR TECHTRONIC INDUSTRIES, MXICO, S.A. DE C.V. Miguel de Cervantes Saavedra No.301 Piso 5, Torre Norte 11520 Colonia Ampliacin Granada Miguel Hidalgo, Ciudad de Mexico, Mexico Modelo:
Fecha de Compra:
Sello del Distribuidor:
MILWAUKEE TOOL 13135 West Lisbon Road Brookfield, WI 53005 USA 58140274d2 05/23 Printed in China 01605030101Q-02(A)
1 | Attestation Statements | Attestation Statements | 48.74 KiB | June 19 2023 |
C5266091_X24_Ed.2 Attestation Statements TO:
Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Shenzhen Jonter Digital Co., Ltd Grantee code: 2AB9S FCC ID:
Contact Name:
Address:
Shenzhen, Guangdong China Telephone No:
Fax No:
Email: Wxh102030@163.com
(86)0755-27364548
(86)0755-27364548 2AB9S-2952-20 Xiaohuai Wang 3F/4B, Hezhou Jinfo Industrial Park, Hezhou, Xixiang Street, Baoan District, i. ii.
[Shenzhen Jonter Digital Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.
[Shenzhen Jonter Digital Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Shenzhen Jonter Digital Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 06.07.2023 Applicants Name: Xiaohuai Wang Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1
1 | Confidentiality | Cover Letter(s) | 109.12 KiB | June 19 2023 |
C5266091_X10_Ed.2 Shenzhen Jonter Digital Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/7/2023 Subject: Request for Confidentiality FCC ID: 2AB9S-2952-20 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules
(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:
Name: Xiaohuai Wang Title: Manager 1/1
1 | Letter Authorization | Cover Letter(s) | 85.09 KiB | June 19 2023 |
C5266091_X8_Ed.1 Letter of Authorization Company: Shenzhen Jonter Digital Co., Ltd Address: 3F/4B, Hezhou Jinfo Industrial Park, Hezhou, Xixiang Street, Baoan District, Shenzhen, Guangdong, China. Product Name: M18 Bluetooth Jobsite Radio Model Number: 2952-20 FCC Identifier: 2AB9S-2952-20 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiaohuai Wang Date: 6/7/2023 Title: Manager Signature of applicant:
1/1
1 | US Agent Letter | Attestation Statements | 27.42 KiB | June 19 2023 |
US Agent for Service of Process LETTER OF ATTESTATION TO:
Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:
Company Name: Milwaukee Electric Tool Corporation FRN: 0005815352 Contact Name: Christopher Lovell Address: 13135 W Lisbon Rd, Brookfield, WI,,53005-2550, United States Telephone No: 262-923-9340 Email: Christopher.Lovell@milwaukeetool.com Applicant:
Company name: Shenzhen Jonter Digital Co., Ltd Product Description: M18 Bluetooth Jobsite Radio Grantee code:
FCC ID:
Contact Name:
Address:
Shenzhen, Guangdong China Telephone No:
Email:
(86)0755-27364548 Wxh102030@163.com 2AB9S 2AB9S-2952-20 Xiaohuai Wang 3F/4B, Hezhou Jinfo Industrial Park, Hezhou, Xixiang Street, Baoan District,
[Shenzhen Jonter Digital Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [Milwaukee Electric Tool Corporation] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Jonter Digital Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment.
[Milwaukee Electric Tool Corporation] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 06.07.2023 Applicants Name: Xiaohuai Wang US Agents Name: Christopher Lovell Title: Manager Signature Title: Senior Regulatory Engineer Signature 1/1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-06-19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-06-19
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Jonter Digital Co., Ltd
|
||||
1 | FCC Registration Number (FRN) |
0023545940
|
||||
1 | Physical Address |
3F/4B, Hezhou Jinfo Industrial Park, Hezhou, Xixiang Street, Baoan District
|
||||
1 |
3F/4B, Hezhou Jinfo Industrial Park
|
|||||
1 |
Shenzhen, Guangdong, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@applus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AB9S
|
||||
1 | Equipment Product Code |
2952-20
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X**** W******
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
(86)0********
|
||||
1 | Fax Number |
(86)0********
|
||||
1 |
W******@163.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen Microtest Co., Ltd
|
||||
1 | Name |
L**** C******
|
||||
1 | Physical Address |
Shenzhen
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
l******@51mti.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | M18 Bluetooth Jobsite Radio | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Microtest Co., Ltd.
|
||||
1 | Name |
S****** L****
|
||||
1 | Telephone Number |
0755-********
|
||||
1 |
S******@51mti.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC