mera USER MANUAL FECE RoHS Za &
Made in China
* please read the instructions carefully before using Product Parameters Model 08 Transmission Distance 110M (under barrier-free environment) BT VALE Mode Bluetooth Version Charging Time about 1H Standby Time about 200H Music Time about4sH Talking Time about 4.5H Battery Type lithium polymer battery Transmission Frequency 2402-2.4806H2 Supporting Protocols HFPL7, HSP1.2, A2DP1.3, AVRCPL6, SPP1.2, PBAPLO|
Battery Capacity a5mAh So0mAh 5V-500mA, Charging Cabin Capacity Charging Input Function of Headphones 1.Power on Turn on automatically: Take out the headphones and both blue lights twinkle. Long press touch key: After 2 seconds, both blue lights twink with voice prompt Touch Key 2.Power off Turn off antomatically: Put the headphones in the cabin and they are off-power, then on the state of charging, Press and hold the MFB touch key: Press on the touch key for 3 seconds when the headphones are in the state of powe-on. Then the red lights are on with voice prompt Power Off. C4 3. Play / Pause
\When the music is playing, dick the multifunction touch key to pause, then dick to play. 4. The next song Whe the musics playing, double licks of the touch key for the next song. 5. The last song When the music is playing, three dicks of the touch key for the last song. 6. Activate Siri
\When the headphones are working, long press the touch key for 1 second. 7. Answer the Calls When the calls come, press the touch key once for the calls. 8, Reject/ Hang on the Calls Inthe conversation between the two parties, short press the multi-function touch key. Bluetooth headphones are paired with phones. 1. The first use of headphones paring. When they are picked up from charging cabin, R/ L biue light flashes. every 1s The next me becomes R red and blue altemately flashing and L blue light is off. Now open your mobile phone bivetooth to search TIK-T1" and click the name,bluetooth connected successfully. 2. The headphones are not paired with mobile phones the first time. Open the cabin and take out of the headphones. The the headphones are paired with your mobile phone automatically.
~ Bluetooth Jong press pairing @ TIKeTL 3. Using single headphone: You can only use the right headphone. The control of the headphone is the same as that of the twin headphones. 4. Power off automatically when unconnected. The headphones will automatically shut down after 5 minutes without any device connection. Factory Reset
(This mode is used for headphones pairing failure or when left and right headphones can't be paired successfully) The method is: when the headphones are off power, the left and right earphones are respectively pressed the multi-function touch key for 12s. The both headphones flash blue light then the right headphone alternately flash red and blue, Next the left light turn off, At last, the both headphones flash pink light, then they both turn off and power off. Paring information is cleared up. Then power off and pair with right and left headphones automatically again. The operation of charging cabin 1. When the headphones are placed in the charging cabin, they are charged antomatically and the indicator light is lighting long, 2. When the heardphones are charged fully, the red linght tums off. 3.The indicator light on the charging cabin shows the electricity life. Note:
1. When opening the headphone charging box, pay attention to the marks of the left and right headphones. The left side is the right headphone,and the right side is the left headphone. 2. When taking out the headphones, please be careful not to touch the multi-
function key to avoid misoperation. 3. When T1 is not in the state of pairing, the phone will not be searched for the headphones. Please confirm that the headphones have opened the pairing state before searching (red and blue lights flashing alternately) 4. Ifthe headphones are not used for a long time (more than 3 months), please charge it. Red Lichtin Low Batten Charge tour Heed phones Wearing method:
(Left ear ) R
(Right ear) FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital devieo, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does, cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient of relocate the receiving antenna increase the separation between the equipment and receiver Conneet the equipment into an cutlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation expasurere quirement. The device can be used in portable exposure condition without RF striction.