BLUETOOTH MINI TOWER SPEAKER MODEL: SP269PL-ASST INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases shall not be placed on apparatus. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC WARNING:
To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device. 1
2 INSTALLATION 1. Remote Sensor 2. Speakers 3. Speaker Net 1 3 2 Note:
The Speaker Net can be taken out and reassembled as Figure above. 3 LOCATION OF CONTROLS MAIN UNIT 1. AUX IN jack 2. Indicator 3. EQ(Equalizer)button 4. POWER button 5. SOURCE button 6. VOL- (Volume Down) button 7. VOL+ (Volume Up) button 8. (Next) button 9. (Previous) button 10. (Play/Pause) button 11. DC IN Jack 1 2 3 4 5 6 AUX IN EQ SOURCE VOL-
VOL+
10 9 7 8 DC IN DC 12V, 1A DC IN DC 12V, 1A 11 4 LOCATION OF CONTROLS REMOTE CONTROL SOURCE POWER 2 3 VOL EQ 1 2 3 4 5 6 7 8 1. POWER button 2. (Previous) button 3. VOL (Volume)+/- buttons 4. SOURCE button 5. (Mute) button 6. (Next) button 7. (Play/Pause) button 8. EQ (Equalizer) button 5 BATTERY INSTALLATION--- REMOTE CONTROL
-First Time Use Remove and discard the insulation tab as figure on the right
-Replacing Batteries For Remote Control 1. Push and slide out the battery holder as figure 1 below. 2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder. Fig.1 Fig.2 Fig.3 BATTERY PRECAUTIONS EFFECTIVE DISTANCE OF REMOTE TRANSMITTER Remote Sensor Approx.15 feet 6 GENERAL OPERATIONS 1. Insert the AC/DC Adapter plug into a conveniently located AC outlet having 100-240V~50/60Hz. The Indicate (Red) will light. 2. Press the Power button on the unit or remote control to power on the unit. 3. Press the SOURCE button repeatedly to switch to desired mode.The color of Indicator turns corresponding color as below:
to
~ Blue: Bluetooth
~ Green: AUX IN 4. During Playback:
~ Press the VOL (Volume) buttons to adjust volume level as desired.
~ Press the EQ button repeatedly to select and set equalizer mode as desired.
~ Press (Mute) button on the Remote Control to turn off the sound. Press again to resume.
~ Press the or button to skip track.
~ Press the (Play/Pause) button to pause. Press again to resume normal playback.
~ Press the EQ button on unit or on remote control to change the EQ mode. 5. When finished listening, press the Power button to power off the unit.The indicator will turn Red. NOTE:
Pull out the AC/DC Adapter plug to shut off the unit if no using for long period of time. 7 LISTEN TO EXTERNAL AUDIO DEVICES X I AUX IN EQ SOURCE VOL-
VOL+
1. Connect one end of supplied audio connection cable to the AUX IN jack on the top of the unit as the figure above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPhone, iPad, MP3 player, Discman... etc.). 3. Power ON the unit. 4. Press the SOURCE button repeatedly until the color of Indicator turns to Green. 5. Play the music in the external player as usual. 8 BLUETOOTH PARING AND PLAYBACK 1. Power ON the unit. 2. Press the SOURCE button on the unit or remote control until the color of Indicator changed to Blue. 3. Turn on the BT function on the external BT device and play the music as usual. 4. During palyback:
Press the VOL (Volume) +/- buttons to adjust volume level. Press the or button to skip track. Press the (Play/Pause) button to pause. Press again to resume normal playback. NOTES:
In first time use, pairing the external BT device as below:
A. Power ON the unit, press the SOURCE button repeatedly until the color of Blue and blinking. Indicator turned to B. Power ON the external BT player and enter to searching mode. Start pairing as the on screen instructions on the external BT Player (For details pairing procedures, please refer to the users manual of your BT device.). C. When the external BT player searched the Speaker, our model number SP269PL will appear on the display of external BT device. Select it and make pairing. D. Pairing code 0000 may need to enter. E. After successful connection, play music as usual. 9 TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION No power AC/DC adapter plug not connected to the wall outlet Plug to the wall outlet. Volume in minimum position Raise volume level by pressing the VOL
(Volume) + button No sound The connected device is not in payback mode Play the music/movie in the connected device as usual and make sure the volume level of it is in high level Input source incorrect Press the SOURCE button repeatedly to set the input source to the desired mode Bass level of the connected device too high Reduce the bass level of the connected device Volume level too high Reduce the volume level by pressing the VOL (Volume ) - button The batterry is consumed Replace with new battery The external device is far from the unit Put the external BT device close to the unit Have not paired Pair both units as BT pairing page Sound distortion Remote not working Bluetooth reception failure 10 TECHNICAL SPECIFICATIONS AC/DC Adapter Input........................................................................................................AC 100-240V~50/60Hz Output...............................................................................................DC 12V 1 A Speakers ...............................................................................................................................3W x 2 Bluetooth Working Distance.........................................................................................Up to 30 feet and structures may affect the effective range.) Remote Working Distance...........................................................................................Up to 15 feet
(Measured in open area. Wall Accessories 1 x User Manual 1 x Remote Control 1 x AUX IN Cable 1 x AC/DC Adapter 11 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.