FCC ID: 2ATFT-L710S 1080P FHD VIDEO PROJECTOR

L710S 110*140mm 128 1080P FHD VIDEO PROJECTOR Quick Start Guide 01 Your Miroir Wireless Projector with SYNQ TV Lens Power Button Power Input HDMI Headphone Jack USB IR Included in the Box Projector Remote Control Power Cable User Manual Learn More To learn more about your Miroir drivvplay and its operations, to review specs, and nd answers to frequently asked questions, please visit: www.miroirusa.com/L710S 02 POWER Source Left Down Return Focus(Zoom out) Vol+

Vol-

Bluetooth Setup Up Right OK Homepage Menu Autofocus Focus(Zoom in) Mute BATTERIES STATEMENT AND NOTICES Remove the battery compartment cover on the back of your remote by carefully sliding it open. You can then lift the battery cover away. Fit the correct batteries, referring to the polarity markings. Finally, replace the lid. NOTE:

When you receive the product and nd that the remote control batteries are swollen or softened, please do not use it before you change it. Do not expose the batteries to excessive heat, such as the sun or re. Make sure that batteries are installed with the correct polarity. Only the same or equivalent type batteries as recommended are to be used. Do not dispose of batteries to re; batteries may explode or leak. Do not try to recharge a battery. Do not mix old and new batteries. Do not mix alkaline, standard(carbon-zinc), or rechargeable (ni-cad,ni-mh, etc.) batteries. 03 Operation guidelines:

l. To prolong the projector's lifespan, we highly recommend unplugging the power cable entirely if you're not using the projector for an extended period. 2. After plugging the projector into an AC outlet, it takes 10 seconds for the system to detect power on, so please wait for the system to come on. 3. The bottom of the projector has a cooling vent; please ensure any objects do not block it. 04 PROJECTION DISTANCE & SIZE The recommended projection screen size is 80 - 120 inches. To improve your viewing experience, ensure you have a room where you can control the lighting. These factors work together to provide a visually stunning and immersive viewing experience. 200 180 150 120 100 80 60 47 1.3m 1.7m 2m 2.7m 3.2m 3.5m 4m 5m Note: The above data are for reference only, please refer to the actual measurement. 05 Connecting Your Projector with a Cable Connect To Your Laptop HDMI Connect To Your Device HDMI Cable

Included) HDMI Cable

Included) HDMI Adapter may be required for your device.

(not included) Connect To Your MacBook USB-C Connect To Your Apple Device Lightning HDMI Cable

Included) USB-C Digital AV Multiport Adapter

(not included) IMPORTANT! Not all USB C cables will support video. HDMI Cable

Apple Lightning Digital AV Adapter is required for iPhone. (not included) Connect To Your Streaming Stick HDMI USB Power Cable

(if required) 06 Settings Setting 07 B. Bluetooth Remote Control 1. Go to Setup > Bluetooth Settings > Bluetooth (On) > Scan for device 2. Place the remote control close to the projector, press and hold the "LEFT" and "RIGHT"

on the remote control until the indicator light ashes quickly and shows up "BT- Remote Control" and choose "BT-Remote Control" and enter "OK" button. 3. After being connected, the operation of the remote control will be more sensitive and the coverage will be broader. Note:

(1) You can connect other Bluetooth devices Once the Bluetooth remote control is connected.

(2) Please keep the projector's Bluetooth ON to ensure the Bluetooth remote can connect and work normally. 08 BT Adjust the Projector Image Focus(under Settings) By default, the auto focus model of the projector is enabled, allowing it to quickly detect and adjust to the optimal clarity of the screen when it is turn on, or you can manually adjust the picture clarity by Press the remote - button and + adjust the picture clarity Keystone (under Settings) The projector will auto keystone to 4-points, or you can manually adjust under settings Zoom (under Settings) Depending on your projectors distance from the wall, use the zoom feature to adjust the image size, can be zoom out to 50% of full size, default is 100% (no zoom) 09 Connecting Your Projector Wirelessly WIFI Connect the L710S to your WIFI network. Open Settings, and select WIFI and follow the instructions. Update the projector if prompted Open the SYNQ TV App Connect to the available streaming services (not included); a streaming service subscription is required to stream with SYNQ TV Once youve logged into your streaming account, start streaming!

Screen Mirroring YouTube, TikTok and other non-DRM-controlled applications will support screen mirroring. Connect your iOS, Android, Laptop, or Tablet wirelessly via the device mirroring option. Netix and other DRM-regulated applications will not support screen mirroring. Local photos and videos you have taken support Screen Mirroring. NOTE:

1. Please ensure the projector and your iOS device have been connected to the same Wi-Fi; if there is no Wi-Fi, please open a hotspot on your iOS device and connect the projector. 2. Please remember to open the Wi-Fi function on your Android device. But it is not necessary to connect to any Wi-Fi router. 10 11 12 Remote Control not working

-Make sure the batteries are installed with the correct polarity and don't need to be replaced.

-Make sure the remote is connected to Bluetooth. Blurry image

-Use the manual focus to adjust the image No Sound

-Check to make sure the mute button was not pressed. Projector shut down

-Make sure the bottom vents are not blocked which would cause overheating and shutdown Image is displayed incorrectly

-Make sure the correct "projection mode" is chosen in under the "settings"

"image mode". Screen mirroring not working

-Due to DRM control, some videos cannot be mirrored from your device to the projector. e.g. Netix and other DRM controlled content. 13 Black Spot on screen

-Wipe the lens to remove any dust, use a clean cloth. Missing accessories

-Contact Miroir Support at www.miroirusa.com for assistance. 14 FCC INFORMATION This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and2) This device must accept any interference received including interference that may cause undesired operation. Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Caution: To maintain compliance with the FCCs RF exposure guidelines, place the product at least 8 inches from nearby persons. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. Caution: The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized. ONE (1) YEAR LIMITED WARRANTY USA & Canada Only Miroir (Miroir) warrants to you, the original retail purchaser (Consumer), that this product (Product) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) year from date of original purchase. Consumers sole and exclusive remedy, and Miroirs sole and exclusive responsibility under this warranty will be, at Miroirs option, either to repair or replace the defective Product during the one (1) year limited warranty period so that it performs substantially in accordance with the accompanying documentation on the date of your initial purchase. The forgoing warranty is limited and is not applicable to: (i) normal wear and tear; (ii) defects or damage caused by misuse, accident (including without limitation collision, re and the spillage of food or liquid), neglect, abuse, alteration, unusual stress, modication, improper or unauthorized repair, installation, wiring, or testing, improper storage, use in an unapproved device or if the serial number has been removed; (iii) use not in accordance with the documentation;

and (iv) damage caused by the equipment with which the Product is used. To obtain warranty service for any Product that is subject to the foregoing warranty, Consumer must contact Miroir, provide proof of purchase and a description of the issue. Consumer shall bear the cost of returning the Product for repair or replacement under this limited warranty. Any Product returned without proof of purchase will not be honored under this limited warranty. The limited warranty extends only to Consumer and is not assignable or transferable to any subsequent purchaser or user. THE LIMITED WARRANTY SET FORTH ABOVE IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES AND MIROIR HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NON-INFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION. To the extent Miroir may not, as a matter of applicable law, disclaim certain implied warranties, the duration of any such implied warranty shall be limited to the shorter of the one (1) year limited warranty period or the minimum time period permitted under such law. Some states do not allow limitations on the duration of implied warranties, so the above limitation may not apply to you. This limited warranty gives you specic legal rights, and you may also have other rights that vary from state to state. IN NO EVENT WILL MIROIR BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF ANY REPLACEMENT GOODS OR SUBSTITUTE EQUIPMENT, LOSS OF USE, CLAIMS OF ANY THIRD PARTIES, OR ANY OTHER DAMAGES ARISING FROM MIROIRS BREACH OF THIS LIMITED WARRANTY OR THE USE OF THE PRODUCT, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT,TORT (INCLUDING NEGLIGENCE) OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF MIROIR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL MIROIRS TOTAL CUMULATIVE LIABILITY EXCEED THE PRICE PAID BY CONSUMER FOR THE PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If you have any questions concerning this statement of limited warranty please email Miroir at miroirusa.com for any more questions. One (1) Year Limited Warranty European Union (EU) Miroir (Miroir) warrants to you, the original retail purchaser (Consumer), that this product (Product) will under normal use operate substantially in accordance with the accompanying documentation for a period of one (1) years from date of original purchase. Consumers sole and exclusive remedy, and Miroirs sole and exclusive responsibility under this warranty will be, at Miroirs option, either to repair or replace the defective Product during the one (1) years limited warranty period so that it performs substantially in accordance with the accompanying documentation on the date of your initial purchase. The forgoing warranty is limited and is not applicable to: (i) normal wear and tear; (ii) defects or damage caused by misuse, accident (including without limitation collision,re and the spillage of food or liquid), neglect, abuse, alteration, unusual stress,modication, improper or unauthorized repair, installation, wiring, or testing, improper storage, use in an unapproved device or if the serial number has been removed; (iii) use not in accordance with the documentation;

and (iv) damage caused by the equipment with which the Product is used. To obtain warranty service for any Product that is subject to the foregoing warranty, Consumer must contact Miroir, provide proof of purchase and a description of the issue. Consumer shall bear the cost of returning the Product for repair or replacement under this limited warranty. Any Product returned without proof of purchase will not be honored under this limited warranty. The limited warranty extends only to Consumer and is not assignable or transferable to any subsequent purchaser or user. THE LIMITED WARRANTY SET FORTH ABOVE IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES AND MIROIR HEREBY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE OR PURPOSE, NON-INFRINGEMENT, QUALITY AND TITLE. MIROIR DOES NOT WARRANT THAT THE PRODUCT IS ERROR FREE OR THAT IT WILL FUNCTION WITHOUT INTERRUPTION. To the extent Miroir may not, as a matter of applicable law, disclaim certain implied warranties, the duration of any such implied warranty shall be limited to the shorter of the one (1) years limited warranty period or the minimum time period permitted under such law. IN NO EVENT WILL MIROIR BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF ANY REPLACEMENT GOODS OR SUBSTITUTE EQUIPMENT, LOSS OF USE, CLAIMS OF ANY THIRD PARTIES, OR ANY OTHER DAMAGES ARISING FROM MIROIRS BREACH OF THIS LIMITED WARRANTY OR THE USE OF THE PRODUCT, REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT,TORT (INCLUDING NEGLIGENCE) OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF MIROIR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL MIROIRS TOTAL CUMULATIVE LIABILITY EXCEED THE PRICE PAID BY CONSUMER FOR THE PRODUCT. If you have any questions concerning this statement of limited warranty please email Miroir at miroirusa.com for any more questions. 15 www.miroirusa.com L710S.07.2023 2023 Miroir USA, LLC. All rights reserved. Miroir and the Miroir Logo are owned by Miroir USA, LLC. All other trademarks are the property of their respective owners. Miroir USA, LLC assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

Page 1 of 1 FCC ID: 2ATFT-L710S LABEL AND LOCATION Size: L5.6cm x 3.5cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Shenzhen Kejinming Electronic Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 8/23/2023 Shenzhen Kejinming Electronic Co.,Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2ATFT-L710S):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Kejinming Electronic Co.,Ltd. Shenzhen Kejinming Electronic Co.,Ltd with the FRN 0028509735 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Ruiqi Chen Sales Director 5 0 V Signature Tim Payne Manager Shenzhen Kejinming Electronic Co.,Ltd FCC US Agent, LLC

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2ATFT-L710S Model name KJM-805A, L710S For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-23 Name / Title: Ruiqi Chen / Sales Director Company: Shenzhen Kejinming Electronic Co.,Ltd Address: 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 E-Mail: evans@kejingming.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Shenzhen Kejinming Electronic Co.,Ltd Address:

1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. FCC ID: 2BA3C-H89 If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-23 Name / Title: Ruiqi Chen / Sales Director Company: Shenzhen Kejinming Electronic Co.,Ltd Address: 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 E-Mail: evans@kejingming.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2ATFT-L710S We, applicant Model name KJM-805A, L710S Company Name: Shenzhen Kejinming Electronic Co.,Ltd Address:

1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-08-23 Name / Title: Ruiqi Chen / Sales Director Company: Shenzhen Kejinming Electronic Co.,Ltd Address: 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 E-Mail: evans@kejingming.com

Shenzhen Kejinming Electronic Co.,Ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2ATFT-L710S Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Ruiqi Chen / Sales Director Company: Shenzhen Kejinming Electronic Co.,Ltd Address: 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 Fax: /

E-Mail: evans@kejingming.com Page 1 of 2 Rev.2.0

Shenzhen Kejinming Electronic Co.,Ltd 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Date: August 23, 2023 FCC ID: 2ATFT-L710S Model Number: KJM-805A, L710S To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Kejinming Electronic Co.,Ltd hereby declare that our product (1080P FHD VIDEO PROJECTOR) Model Number: KJM-805A, L710S board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Ruiqi Chen / Sales Director Company: Shenzhen Kejinming Electronic Co.,Ltd Address: 1-6F, Block B7, Yintian Industrial Park Xixiang Street,Bao'an Dist. Shenzhen, China Phone: +86-755-27489177 E-Mail: evans@kejingming.com