FCC ID: 2ASWD-ANC-S3 Active Noise-Cancelling Earphone

HiFi 1X 1X USB 1X 1X 1. 2.//

3. 4.-/

5.+/ 6.//

7.USB 56 4 3 2 R L 7 1 3(

1S) 3(

1S) 1 25 31

;

4

++

--

+

_

/

601

,

(

100mS 1/

/

12 2 2 V4.2+V2.1 20Hz20KHz ANC+

A2DP v1.3\AVRCP v1.5\HFP v1.5

(SPK):1013db @ 1KHz 12 915h 700h IVT ANC-S9 USB 5V 6, ANC-S9 0000 OKYES ACTIVE
NOISE
CANCELLING
EARPHONES ACTIVE
NOISE
CANCELLING
EARPHONES ACTIVE
NOISE
CANCELLING
EARPHONES ACTIVE
NOISE
CANCELLING
EARPHONES ACTIVE
NOISE
CANCELLING
EARPHONES PRODUCT DESCRIPTION APPEARANCE METHOD OF USE The bluetooth active noise cancelling earphone, Disturbing ambient noise in the low frequency range is sensed by the tiny microphones and deleted by counter-sound (phase inverse tones). It has good noise cancelling performance through active&passive noise cancellation. Especially apply for noisy environment such as airplane, High-speed train. The product use high sensitive driving speaker, offer HiFi sound even at the very noisy situation,ANC-S9 is applied for smart phones, pads, players. The product construction meets the ergonomic design, light beautiful and suitable, the ear tips have large, medium, small three size, it is safe and environmental , no irritant. Notes: Please read this User Manual carefully before using the ANC-S9 ANC earphones. PACKING LIST 1X ANC Wireless Earphone ANC-S9 1X USB Charging Cable 1X User Manual 1X Large & Small Earplugs 1.MICROPHONE 3.ANC ON/OFF Button 5.NEXT/Volume up 7.MICRO USB Charging Port 2.ON/OFF/Play/Pause Button 4.Previous/Volume down 6.ANC/BT/Charging Indicator LED 56 4 3 2 R L 7 1 FUNCTION OPERATION AND INDICATION Power on Press and hold ON/OFF button for 3 second and the Blue light will flash shortly. Press and hold ON/OFF button for 3 second and the blue light off. 1. Reconnect the recorded devices automatically when BT power ON. 2. Blue light flash quickly during pairing, if no. devices connected,the earphone is power off after 5 min time out. 3. Enter by press&hold ON/OFF button for 1 second. Power off Pairing Volume up Short press button +. Volume down Short press button -. Previous song Long press the button +. Next song Long press the button -. Play/pause Short press ON/OFF button. Low-battery alert Power off Eeaphone will be power off at super low battery status. Charging LED flashing.After the battery level has reached,LED turns blue. Initialization Press and hold the button +/-/Onbutton at same time for 5s. Refuse a call Long press ON/OFFbutton. Recall When at the low battery status ,It make a sound bee once per minute). Double short pressON/0FFbutton. 1Long press the ANC button 2After power on ,short press the ANC button Long press the ANC button ANC OFF If the headset is not connected to any compatible mobile phone or other compatible device within 5 minutes, the headset will automatically shut down. ANC ON SPECIFICATION Bluetooth version:V4.2+V2.1 dual model Frequency range:20Hz20KHz Core design:ANC+bluetooth Support:A2DP v1.3\AVRCP v1.5\HFP v1.5 Sensitivity:1013db @ 1KHz Charging time:12h Playing time:915h Standby time:700h MATCH YOUR PHONE OR OTHER DEVICES Firstly, you must pair your earphones with your cellphone or computer.If the earphones is paired with a cellphone, the phone and earphones are automatically paired in the effective distance.If you are using a computer, you only need to select an audio connection. PAIRED AND USED WITH MOBILE PHONES Turn on the phone and make sure the bluetooth is enabled. Wireless erabuds boot into match. Follow the instructions on the phone to find the bluetooth device. The device displays the bluetooth device ANC-S9 on the phone and selects the device. When the matching code is displayed on the phone, please enter 0000 as the matching code. The phone prompts you to confirm this pairing, please press OK or YES. The phone is connected to a wireless erabuds, so you can turn on your audio devices to play music, watch movies, and play games.All sounds come from a bluetooth speaker. Of course, you can also control the volume tracking by pressing the control buttons. MATCH AND USE THE COMPUTER Wireless erabuds boot into matching mode. Open the bluetooth control software on your computer or the software that comes with the operating system, such as the IVT software to search for the bluetooth device menu. After searching for the wireless erabuds, the wireless erabuds name ANC-S9 will appear in the list of devices to be explored. Select this device, click the right mouse button, select match this deviceoption. Finally, turn on your computer's media player or play music, or watch a movie, or play a game, and the wireless erabuds is a headset. CHARGE THE EARPHONES The earphones use the micro USB for charging. This product provides the charging cable which requires the adapter with a 5VDC output .Makesure you charge your headset for at least six hours at the first time,Charging LED flashing. After the battery level has reached,LED turns blue. Enjoy the life Shielding ambient noise | Only y ou and music SAFETY RULES To ensure your safety,please follow the rules mentioned in this manual Before operation, we would strongly suggest you to read this user manual carefully. Be more careful for any edges, uneven surfaces,metal parts, accessories and its packaging so as to prevent any possible injury or damage. Do not repair or dismantie this ANC wireless earphones,if you do so,it may resuit in fires,electric shocks,complete breakdown etc.All of above are not with in warranty. Do not use any diluents or volatile liquid to clean the ANC wireless earphones. Do not use the ANC wireless Earphones in a dangerous location. ANC-S3 U s e r M a n u a l ANC-S3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

ActiveNoiseCancellingEarphone Model:ANCS3 FCCID:2ASWDANCS3

(Shenzhen KFLWilsdom Invention Technology Co.,Ltd) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:

2ASWD-ANC-S3 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

(gao hePeng) File Name Block Diagram Schematics Operational Description Rev 11/20/07

Shenzhen KFLWilsdom Invention Technology Co.,Ltd Model Difference Product description: Active Noise-Cancelling Earphone Model name: ANC-S3, ANC-S9, ANC-T9, ANC-06, ANC-08, ANC-S7 Trade Name: N/A FCC ID: 2ASWD-ANC-S3 All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : gao hePeng (N/A) Contact information / address: No.537,1st Gushu Road, Xixiang Street, Baoan Sistrict, Shenzhen, Guangdong Province, China

(Shenzhen KFLWilsdom Invention Technology Co.,Ltd) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date:

SUBJECT: FCC Application for FCC ID: 2ASWD-ANC-S3 To Whom It May Concern:

We, the undersigned, hereby authorize Andy Yuan at Shenzhen BCTC Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Andy Yuan of Shenzhen BCTC Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(gao hePeng)