Wireless Doorbell
Waterproof Long range Low temperature resistance
User Manual
1 receiver to 1 transmitter has already been paired in factory and could use it directly. If requires 1 receiver with 2 transmitters, or 2 receivers with 1 transmitter, or multiple receivers with multiple trans-
mitters or other options, please do the pairing accordingly.
1) Press and hold volume button for ~ 3 seconds and enter into learning code mode, the LED will lights up and the receiver will produces Du sound, then release it. 2) Press the device button (or trigger the door magnet / the infrared sensor), the receiver will produces sound Du to indicate the pairing is successful.
Set the private doorbell button and choose a spe-
cial ringtone to remind the owner if use in a private door for go in and out. The pairing method is as follows:
1.) Press ringtone selection key of the receiver to choose a special ringtone 2.) Press and hold ringtone selection key for ~ 3 seconds enter into learning code mode,
.
Physically simple and elegance. Ringtone rhythm lamp and loudspeaker which are aesthetically and acoustically pleasant. Feel extra comfortable when lite up gently at night time. Batteries life span is ~ 6 to 10 years and rarely for batteries replacement. IP54 waterproof, low temperature resistance, suitable expose to outdoor rain and snow weather. Advanced wireless technology, long distance transmission, suitable for grand houses or heavy duty anti-theft doors. Extra detailing functions: Power-off memory function, privacy button, ultra-low power consumption, pairable wireless sensors. Workable areas: Private houses, villas, schools, companies, hospitals and etc..
Front Side Back
Select ringtone key
Night light setting key
Volume setting key
AC plug
( Different countries use different plug standard )
40mm loudspeaker
2.1.1 The device shall be installed at an appropriate height near the door on a clean wall surface. It is recommend-
ed to install transmitter button on the wall to avoid wireless signal interference instead of mount at a metal door.
2.1.2 Take out one side of double-sided tape liner
(together with the device) and attached to provided surface of the device. After remove another side of the liner, attach the device at a proper position on the wall/door. Please press the device for 30 seconds continuously before release.The tape will more firmly adhered. Tape Pasting Method:
Doorbell button Door Magnet Infrared Sensor 2.1.3 Please use a screw to fix the device if the tape is not adhere to the wall firmly. Figure: Screw assembly method
2.1.4 After plug into a suitable socket, test and setup the receiver. The factory default settings of receiver are in maximum volume and night light off mode.
2.2.1 Press key to select ringtone for preview the doorbell ringtone at first 10 seconds with 48 ringtones selection. Tip: If return to the first ringtone quickly, please press and hold the receiver s select ringtone key and plug-in the socket, the receiver will produces Di sound to restore the factory default settings. 2.2.2 Press key to set volume level: 43 21mute ( only flash LED light ) 2.2.3 Press key to set 7 levels of brightness:
OFF123456.
2.3.1 Normal doorbell function: After pressed the doorbell button, the receiver plays the selected ringtone and the LED lamp flashes according to the ringtone. 2.3.2 Private doorbell function: After the private mode of the doorbell button is pressed, the receiver plays preset the doorbell ringtone as per initial paired bonding setting, this ringtone is not affected by the ringtone selection key. 2.3.3 Detection reminder function: Like pairing door magnet/ infrared motion sensor, the sensor will be triggered same as when press the wireless doorbell button. 2.3.4 Night lamp function: After press the button
, the device s LED lamp will light up gently, feel warm and safe if the surrounding is in dark condition. the LED will lights up and the receiver will produces Du sound, then release it. 3.) Press device button (or trigger the door magnet
/ the infrared sensor), the receiver will produces Du sound to indicate the pairing is successful. When the device is paired with this method, the receiver plays the special ringtone which is not affected by the ringtone selection key. Tips: Support up to 32 private buttons corre-
sponding to 32 ringtones; Suggest for the door magnet / the infrared sensor to choose an alarm sound to realize the two-in-one function of doorbell and alarm.
Only 1 transmitter/1 sensor can be paired once at a time. If more than 1 pairing, please repeat the above pairing method.Each receiver can pair up to 32 transmitters/sensors. If 1 transmitter controls multiple receivers, please repeat the above pairing method.
Press and hold volume key for ~10 seconds, the receiver will produces DuDuDu sound, then all pairing will be deleted automatically.
3.1 Doorbell volume : 85~97dB 3.2 Working frequency: 433.92MHz Wireless range: Open space ~ 400m, 40m~80m indoor with obstacles. 3.3 Receiver operating voltage: 80~275V Standby power consumption: 100mW 3.4 Transmitter waterproof : IP54 Battery type : CR2032 (included) Battery lifespan: 300K presses, 6~10 years
( assume press 30 times/day ) 3.5 Environment operating temperature:
Receiver: -20~70 Doorbell button: -40~70 3.6 Environment operating humidity:
Receiver: < 90% RH Doorbell button: <95% RH 3.7 Storage temperature:
Receiver: -20~70 Doorbell button: -40~70
4.1.1 Proper use can prolong this device lifes-
pan. 4.1.2 Non-professional shall not dismantle the device for repair to avoid precision electronic components damage.
Please follow below troubleshooting guides for self-check otherwise contact customer service for further assistance if necessary. 4.2.1 The doorbell does not ring. 1 Check whether the receiver is plugged in properly;
2 Check whether the receiver is in silent mode. 3 For unpaired case, reset to re-pairing. 4.2.2 Short range transmission:
1Not recommended to install the doorbell button near to any metal object which blocks the wireless signal. 2Not recommended to plug the receiver into sockets near routers, computers, water tank motors, etc. with strong interference signal. 3Radio signal transmission diffracts through barriers such as walls which expects normal if the signal transmission range is reduced signifi-
cantly. Please adjust the receiver or transmitter button position accordingly.
Disassemble the panel Remove the battery cover shell with a slotted screwdriver to replace the battery (Leave positive pole of the battery upwards), fix and lock the battery cover then cover the panel Doorbell function Private doorbell 48 Ringtones 5 Volume levels Night light Ringtone rhythm lamp Long range transmission Free combination pairing 85~97dB Loudspeaker Pre-alert detection function optional FCC Warning FCC Warning FCC Warning FCC Warning FCC Warning FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any
(2)interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.