Item: Bluetooth speaker REV: A 20140510 Description:
KTS-88 it is the 2 times 3W Bluetooth speaker, With A2DP and Handfree . Remark:
1. keep out of reach of children!
2. Pls use the original accessories 3 .If unit have problem, pls contact with the seller. Disassemble the unit by User is not allow 4. Keep good ventilated environment when charge the unit, do not keep near inflammables, oxidizers and explosive B. Specification:
1. Size197*61*70MM 9. Charge port: Micro USB 2. Weight--- g 11. Aux in jack3.5MM 3. Battery outputDC3.7 ~ 4.2V 12. AmplifierClass D power amplifier 4. Charge inputDC 5V-600mAh 13. Bluetooth effective distance10M 5. Battery capacity600mAh 14. Microphone: effective distance 50CM 6. Speakers Driver 3W*1+Radiator passive 15. Working/Playback Time @ 50% volume:
4 hours ShenZhen Kingboard technology Co.,ltd REV: A 20140510 7. Bluetooth Ver.: 2.1+EDR 16. Frequency Response150hz-18khz 8. Charging time2 hours 17. Speaker size: 40MM Operation guide A: Connect to the Bluetooth device 1 .Turn on unit firstly, KTS-88 will have the indicate tune, the Indicate LED is "BLUE". Turn on the Bluetooth function on your mobile or other device and search for the speaker, model name "KTS-80". Then Pair the device. 4, Once device is paired Bluetooth will automatically connect when unit is turned on subsequently. B:-
Short press 1 Aux in ModeNo function 2Bluetooth modechange to the last track 3, USB and Micro SD model: Change to the last track Long press 1Aux in mode: No function 2Bluetooth modeDecrease the volume 3, USB and micro SD model: Decrease the volume ShenZhen Kingboard technology Co.,ltd REV: A 20140510 B:+
Short press 1 Aux in ModeNo function 2Bluetooth modechange to the next track 3, USB and Micro SD model: Change to the next track Long press 1Aux in mode: Increase the volume 2Bluetooth modeIncrease the volume 3, USB and micro SD model: Increase the volume C. Short press 1Aux in modeMute 2Bluetooth mode Play or Pause or answer/hand up the call 3, USB and Micro SD mode: Play or Puase Long press 1Aux in modeChange the mode 2Bluetooth mode: Change the mode 3, USB or Micro SD mode: Change the mode ShenZhen Kingboard technology Co.,ltd REV: A 20140510 Function:
Aux-in Change to the Aux in mode, and Using the audio cable connect to the unit Aux in Jack, it will automatically shift its status and will become AUX-IN. Long time press the"- " and "+" button to decrease and increase the Volume. Charging Plug the USB cable into speaker MICRO USB port and connect to power source. Red LED will on when charging. When charging is complete, the red LED will be off. Accessories:
Audio Cable Charging Cable Manual Certification:
ShenZhen Kingboard technology Co.,ltd