130
.OO0 mm 90.00 mm Manual Model No.:KTS-15 Product Size:63x63x77mm Weight:85g Loudspeaker:40mm Impedance:4Q Rated Power:3W Charging Mode:Micro USB Bluetooth Parameter:
Operation Frequency:2.400GHz-2.480GHz Operation Range:Up to 10m Battery Parameter:
Battery Capacity:300mAh,Built-in lithium battery Music Playing time:3Hours at 70% volume Charging Voltage:DC 5V Charging time:1.5-2 hours Accessory:
USB charging cable:1 piece User manual:1 piece Partial View
@ Speaker
@ MIC:
@ Play/Pause:
Under Bluetooth Mode:
A: Press :Play/Pause/answerthe phone B:Double press : Call back the last calling C:Hold:Cancell the connection
@ Next:
Under Bluetooth Mode:
A:Press :Next B:Hold :Turn up the Volume Previous:
Under Bluetooth Mode:
A:Press :Previous B:Hold :Turn down the Volume Micro USB
@ ON/OFF the obverse side Instructions fo Most importantly,switch on the speaker;
Via Computer:
Start computer bluetooth (if there is no built-in computer BT, please insert a BT adapter)-Search KTS - 15 -matching model (When the blue lights flashing fast, KTS-15 is ready to be connected; When the blue light is not flashing, KTS-15 is connected with computer)-so that you can play music via the computer . Via Mobile phone:
Firstly open the cell-phone bluetooth devices-search the bluetooth outset- Find KTS - 15-connect and play Phone/Hands-free function:
Firstly check if the connection works, connected by KTS - 15, To press [>"to cancel the calling;
To double press [> to callback the last calling;
When the call,long press [> :Refuse to answer the calling The usual situations The solutions
@Check out KTS-15,make sure you turn on the power,@Turn off anther devices,and turn on KTS-15,try to connect again Cant connect with KTS-15 Check out your cellphone or another connector, Distortion and no voice or less | adjust with the volume and set the mode Sound intermittent Make sure you are in the effective distance and there is no barrier between them. FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules]
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet ona circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure requirement. The device can be used in portable exposure condition without RF striction. the reverse side