73x100mm-正
1
What's in the box?
3
Charging
5
How to fit?
6
Power On / Power Off
7
Pairing your earbuds
8
Function
9
Reset and Reconnecting
FCC Warning
BE1036
Twin Wireless Earbuds with Charging Case
Wireless Earbuds
Charging Case
Eartips (S,L)
Earbuds automatically charge in case
Please read this manual carefully before
using the product and keep it in a safe place.
Small Earhooks
Ear loops
• Remove the protective film from the earbuds when using
• Both earbuds will automatically turn on while open the charging
case(with the Green LED lights flashing).
• Put the earbuds back to the charging case and close the lid
to turn them off.
Type-C Cable
User Manual
2
Product Diagram
2
1
3
1
2
3
LED Indicator / Microphone
Touch Area
Charging Pin
1
• Fully charge both earbuds and the charging case before
for the first time.
the first-time using.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.
4
Charging Case Indicator
The charging case indicator will automatically turn off when the
earbuds fully charged.
1. Identify the left and right earbuds
2. Rotate the earbuds,and ajust to find the best angel
3. Make sure the ear tip seals in the ear canal
On
Off
• In the shutdown status and when
the earbuds are not in the charging
case. Simultaneously click and hold
the MFB of both earbuds for 3 seconds
to power on (with the Green LED lights
flashing).
• If the earbuds are not in the charging
case. Pause music first,click and hold
the MFB of both earbuds for 3 seconds
to turn them off.
R
3s
3s
• Both earbuds will automatically turn on (with the Green and red
LED lights flashing) and start pairing while open the charging
case.
• Selet "BE1036" from the list of
devices shown
12:00
Settings
Bluetooth
Bluetooth
MY DEVICES
BE1036
Connected
Each earbud could be used independently
Note:
The earbuds will automatically connect with the device
their last paired with when earbuds are power on.
Shenzhen Kinlan Technology Company Limited
West of 3F, Building A4, Yinlong Industrial Park No.292 Shenshan Road,
Longgang District Shenzhen, Guangdong, China
4
5
4
5
Type-C charging port
LED Indicator
0%-20%
20%-60% 60%-100%
2
3
4
5
6
Play/Pause
Next Song
Single Click(L or R)
Double Click(R)
Previous Song
Double Click(L)
Volume up/down
Long press L/Long Press R
Answer/End Call
Single Click(L or R)
Siri/Google
Assistant
Triple Click(L or R)
X1
X1
X1
X1
X1
X1
If you fail to build connection between two earbuds, or between
two earbuds and your phone,please try the follow step:
Step 1: Delete the old connection on your device.
Step 2: Power on both earbuds, quick click Left or Right earbuds 5
times when they are in pairing mode.
Step 3: Turn on your smart devices
and select “BE1036” to confirm
pairing.
10
Specification
X5
lnput
DC 5V/1A
Wireless Version
V5.1
Support Profile
A2DP,AVRCP, HFP, HSP
Maximum Working Range 10m(without obstacle)
Earbud Charging Time
About 1.5 hours
Earbud Battery Capacity
50mAh
Charging Case Battery Capacity 500mah
Case Charging Time
2 hours
Charging Case Recharge Earbuds 3-4 times
Product Weight
83g
7
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure
requirement.
8
Reject Call
Double Click(L or R)
Earbuds battery life
Up to 6 hours(various by volume and audio content)