Instructions of healthy energy-saving ring illustrate Please note. The ring service is not used to diagnose, treat or prevent any diseases and medical conditions. The information and data in the service are for reference only and cannot replace the services of health professionals and doctors. If you have any questions about medical conditions, it is recommended to consult Professional physician. Product Outer surface material: alloy Main material: epoxy resin Requirements This device supports use on Android and iOS smartphones; System requirements: Android 6.0 and above, iOS 10.0 and above. APP download and installation Scan the QR code below to enter the APP Store, download and install the APP. When installing, please set the relevant permissions prompted to allow. After the installation is completed, there is no need to log in when opening the APP, and it can be used normally after binding the device. Storage capacity: It is recommended to connect to the app and synchronize data every day. The ring can store data for up to 15 days, Parts introduction depending on the type and frequency of use. Product weight: about 2.8 grams Battery capacity: Ring 16mAh Battery life: 3 to 5 days, depending on frequency of use Charging method: Use the provided charging cable (USB rated 5V) Luminous sensor: LED is in the visible color range, safe and user-friendly Connection method: Low energy Bluetooth 5.2 Photoelectric Sensors Manual Software program updateability: Updates via software application Software program compatibility: App store, Google Play Waterproof level: IP68 Charging contacts When using an Android phone, the App will receive all notification permissions such as contact information, and the App must be allowed to run in the background in the phone settings. APP function introduction Activities (Three Rings of Health) Exercise (outer ring): The data comes from exercise. The data of the day is cleared in the early morning (the continuous APP function introduces walking, running, or exercising for more than 10 minutes as one exercise). Different exercise goals can be set in personal information;
Calories (middle ring): The data comes from your exercise and step count. The data of the day is cleared in the early morning. Different calorie targets can be set in personal information;
Time (inner loop): Data source (records daily data), the data of the day is cleared in the early morning. Schematic diagram of activities (three rings of health):
Charge When using this product for the first time, please charge the device first. It will automatically turn on during charging;
Please use the charging accessories delivered by the original factory to charge;
The original charging cable has the function of automatically stopping charging after being fully charged. Non-original charging cables may cause reverse charging, causing damage to the ring and charging accidents;
Please use a charging head that meets safety regulations for charging, use a charging head with an output voltage of 5V, or a computer USB port for charging;
The charging time is related to the battery power. It takes about 2 hours to charge the battery from low power state to full power state;
The red indicator light flashes when charging, and the green indicator light flashes when fully charged, and the flashing frequency slows down. If there is no indicator light flashing during charging, please try to reconnect the charging cable to avoid poor contact that affects the charging effect;
The ring cannot be left without power for a long time, otherwise it may not be able to charge or turn on;
Power on and off Power on: Automatically power on after charging Power off: After the device is connected to the APP, the device can be shut down through the APP. Device connection APP Enter the application click the main menu icon in the lower left corner click "Add Device" to enter the automatic search list to find the device and connect it with The APP will automatically save the Bluetooth address of the ring. When the APP is opened or running in the background, it will automatically search for and connect to the ring;
Pedometer Record the daily real-time step count and clear it in the early morning. You can set the step count target and check the completion level;
Histogram: The distribution of steps per hour from 0:00 to 23:00 in a day. When the number of steps is generated, a histogram will be displayed at the corresponding time;
History record: Displays the number of steps, goal completion and distance at each time point. Exercise There is exercise duration, calories burned and number of exercises. Histogram: The distribution of steps per hour from 0:00 to 23:00 in a day. When starting exercise, a histogram will be displayed at the corresponding time;
Exercise records: Displays the total number of times, total calories and total duration of all exercises. Sleep When you wear the ring to fall asleep, you can check the sleep quality, deep sleep, light sleep time and waking time by connecting to the app, as well as view historical data such as sleep
* Note: Sleep data must be worn at night and connected to the APP to be used. Heart rate/Blood pressure/Blood oxygen When the ring is connected, measurement can be initiated by the APP, and historical data and graphs can be viewed. The ring automatically measures every 2 hours by default. (Stop monitoring during charging and sleeping states) Blood oxygen saturation Need to connect to APP to record the wearers blood oxygen saturation Heart rate variability (HRV) HRV is suitable for users over 18 years old Pressure Need to connect to APP to record the wearer's pressure value Menstrual cycle It is necessary to connect to the APP and set it according to the wearer's physiological phenomenon. Other settings Unit format, temperature unit, sedentary reminder, low battery reminder, heart rate warning Ring maintenance Keep your ring clean and hygienic Not suitable for long-term use in high temperature and high humidity environments Pay attention to wiping and maintaining charging contacts If not used for a long time, it should be charged every 20 days or so and shut down when fully charged. Precautions for use 1When charging, please first magnetic the charging line to the device, and Product safety tips Do not let children and pets play with this product. This product then charge;
contains small components that can cause suffocation. 2If Bluetooth is disconnected during use, please open the APP and Do not replace the battery, open the shell or disassemble the product reconnect (the APP may be disabled by the mobile phone from running in the without authorization, otherwise it may cause safety hazards background, please give the APP background running permission). Do not expose the product to extremely high or low temperatures; do not use the product in high temperature and high humidity environments; do not use chemical reagents to clean the product Do not expose the product to high temperature and high pressure environments, as the battery may explode; do not wear the product while charging; do not charge when the product is wet. Common troubleshooting If any problems occur while using the ring, please refer to the following provisions to solve them. If the problem persists, please contact the dealer or designated maintenance personnel. 1.Unable to search for ring Bluetooth The battery power is too low, please connect the charger to charge. 2.The APP and the ring automatically disconnect The battery power is too low, please connect the charger to charge. If the distance between the phone and the ring is too far, the connection will be disconnected andwhen the distance is reduced, the ring will automatically reconnect 3.The ring is only used for a short time The battery is not fully charged, please ensure there is sufficient charging time. 4.The ring cannot be charged properly. Please check whether the battery is usable. The performance of the battery will decrease after a few years of use. Check whether the charger is charging normally. You can try updating the charger. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help.
