Five grants have been issued under this FCC ID on 08/27/2026 (this is one of eleven releases in 2026 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, troubleshooting guides, drivers, warrantee terms, & instructions.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement SAR tests are conducted using standard operating positions According FCC standards with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This model product has been tested and meets the FCC RF exposure guidelines with the test distance 0 mm for head and 5mm for body worn. The highest SAR1g value is 0.680 W/Kg for head and 0.690 W/Kg for body worn. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC exposure requirements, and should be avoided.
Shenzhen Qichang Intelligent Technology Co., Ltd Room 510,Building 7, Yunli Intelligent Park,No.7 Bantian Street, Longgang, Shenzhen, China Date: 2026/8/24 To:
Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The letter grants authorization for representative of Shenzhen Lagenio Technology Co., Ltd to apply for its own FCC identification number FCC 1D: 2BBVW-EAGLEPRO for the product that is the subject of the Shenzhen Qichang Intelligent Technology Co., Ltd, FCC ID: 2BAK2-F116PRO, granted on 07/22/2026. The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the changed equipment. Applicant/Grantee (Original Company) Name: Shenzhen Qichang Intelligent Technology Co., Ltd Applicant/Grantee (New Company) Name: Shenzhen Lagenio Technology Co., Ltd New applicant Grantee Code (s): 2B8VW New applicant FRN (s): 0033952185 Name of New Point of Contact to be in EAS Database: Kitty Liang E-mail address of New Point of Contact in EAS Database: [email protected] Please contact me if you have any question. Wonton Jey Contact name / title : Wenwen Jiang/Manager Company: Shenzhen Qichang Intelligent Technology Co., Ltd address : Room 510,Building 7,Yunli Intelligent Park,No.7 Bantian Street, Longgang, Shenzhen, China Tel: #86-755-81797123 Fax: +86-755-81797123 E-mail: [email protected]
Shenzhen Lagenio Technology Co., Ltd 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules FCC ID: 2BBVW-EAGLEPRO Referen Date: 2026/8/24 To The Commission:
This change of Identification request applies for a new FCC ID: 2BBVW-EAGLEPRO as established in 47CFR 2.933(b) for a currently approved device. This application by Shenzhen Lagenio Technology Co., Ltd will establish a new FCC ID under Shenzhen Lagenio Technology Co., Ltd Grantee code for purpose of marketing. The original grant to Shenzhen Qichang Intelligent Technology Co., Ltd will remain in effect. An authorization letter by Shenzhen Qichang Intelligent Technology Co., Ltd attached. Per 2.933(b) 1. The original identification is FCC ID: 2BAK2-F116PRO 2. The original grant date is 07/22/2026 3. The equipment is identical to the original equipment. 4, The original test results are applicable and representative of this changed device. 5, Exterior photographs are included in this application. The following files are electronically submitted as attachments:
FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Client's name /title : Kitty Liang/Manager Company: Shenzhen Lagenio Technology Co., Ltd address : 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Tel: +86-15914183886. Fax: N/A Email: [email protected]
Shenzhen Lagenio Technology Co., Ltd 1206, Building 8, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Date: 2026/8/24 To:
Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: 2BAK2-F116PRO; Model Number: F116 Pro, F116, F116 S, F116 P, F116 Plus New FCC ID: 2BBVW-EAGLEPRO; Model Number: Eagle Pro, Eagle This is to advise and officially, that we, Shenzhen Lagenio Technology Co., Ltd hereby declare that the old and new product is identical and only FCC ID and model number difference as market requirement;
The original test results continue to be representative of and applicable to the equipment of the new FCC ID;
If you have any query, please feel free to contact me. Sincerely, itty Liang Client's name / title: Kitty Liang/Manager Company: Shenzhen Lagenio Technology Co., Ltd address : 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Tel: +86-15914183886 Fax: N/A Email: [email protected]
Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:
FCCID | Model name 2BBVW-EAGLEPRO | Eagle Pro, Eagle We, Applicant Company Name: | Shenzhen Lagenio Technology Co., Ltd Address: | 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Phone: | +86-15914183886 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Qwy, Lt Ub Kit Signature Date: 2026/8/24 Printed Name of Signee: Kitty Liang/Manager Company: Shenzhen Lagenio Technology Co., Ltd Address: 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China Phone: +86-15914183886 Fax: N/A Email: [email protected]
Local Representative Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(7), of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:
FCC ID 2BBVW-EAGLEPRO Model name Eagle Pro, Eagle We hereby acknowledge as follows:
i. ii. iii. iv. both signees confirm that the point of contact accepts responsibility to act as a US-
American Representative on behalf of the applicant the point of contact provides the physical U.S. address and email as listed below both parties maintain the requirements of this agreement for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. US-American Point of Contact Applicant/Approval Holder Signature Date: 2026-8-25 Signature Date: 2026-8-25 Company Name: GLOCERTS TECHNOLOGY INC FRN: 0036339737 Contact Name: Huiying Fan Address:
19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 Phone:
(626) 588-8039 Email: [email protected] Shenzhen Lagenio Technology Co., Ltd 0033952185 Kitty Liang 1206, Building B, Hongrongyuan North Station Center, North Station Community, Minzhi Street, Longhua District, Shenzhen, China
Change in identification of presently authorized equipment. Original FCC ID: 2BAK2-F116PRO Grant Date: 07/22/2026
2
5745 ~ 5825
NII - Unlicensed National Information Infrastructure TX
3
2412 ~ 2462
DTS - Digital Transmission System
4
2402 ~ 2480
DSS - Part 15 Spread Spectrum Transmitter
5
13.56 ~ 13.56
DXX - Part 15 Low Power Communication Device Transmitter
Application Forms
app
s
Applicant Information
1 2 3 4 5
Effective
2026-08-27
1 2 3 4 5
Applicant's complete, legal business name
Shenzhen Lagenio Technology Co., Ltd
1 2 3 4 5
FCC Registration Number (FRN)
0033952185
1 2 3 4 5
Physical Address
1206, Building B, Hongrongyuan North Station
1 2 3 4 5
Longhua District, Shenzhen, China, N/A 518000
1 2 3 4 5
China
app
s
TCB Information
1 2 3 4 5
TCB Application Email Address
o******@kl-certification.de
1 2 3 4 5
TCB Scope
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4 5
A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app
s
FCC ID
1 2 3 4 5
Grantee Code
2BBVW
1 2 3 4 5
Equipment Product Code
EAGLEPRO
app
s
Person at the applicant's address to receive grant or for contact
1 2 3 4 5
Name
K**** L****
1 2 3 4 5
Telephone Number
15914********
1 2 3 4 5
Fax Number
N/A********
1 2 3 4 5
E-mail
k******@lagenio.com
app
s
Technical Contact
n/a
app
s
Non Technical Contact
1 2 3 4 5
Firm Name
GLOCERTS TECHNOLOGY INC
1 2 3 4 5
Name
H**** F******
1 2 3 4 5
Physical Address
19784 SUNKISSED RIDGE DR
1 2 3 4 5
United States
1 2 3 4 5
Telephone Number
(626)********
1 2 3 4 5
E-mail
h******@glocerts.com
app
s
Confidentiality (long or short term)
1 2 3 4 5
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
1 2 3 4 5
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app
s
Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5
Is this application for software defined/cognitive radio authorization?
No
1 2 3 4 5
Equipment Class
PCE - PCS Licensed Transmitter held to ear
1 2 3 4 5
NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5
DTS - Digital Transmission System
1 2 3 4 5
DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5
DXX - Part 15 Low Power Communication Device Transmitter
1 2 3 4 5
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)
smart phone
1 2 3 4 5
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?
No
1 2 3 4 5
Modular Equipment Type
Does not apply
1 2 3 4 5
Purpose / Application is for
Change in identification of presently authorized equipment. Original FCC ID: 2BAK2-F116PRO Grant Date: 07/22/2026
1 2 3 4 5
Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization?
Yes
1 2 3 4 5
Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization?
No
1 2 3 4 5
Grant Comments
Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz.
SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission use conditions is 0.68 W/kg, 0.69 W/kg, 0.69 W/kg and 1.34 W/kg, respectively.
This device supports LTE bandwidths of 1.4, 3, 5, 10, 15, 20 MHz at LTE Band 2/4 and of 1.4, 3, 5, 10 MHz at LTE Band 5 and of 5, 10, 15, 20 MHz at LTE Band 7/41.
This device supports Frequency Range 1 5G NR modes of 5, 10, 15, and 20 MHz bandwidth for Band n5 and n7; 5, 10, 15, 20, 25, 30, 40 and 50 MHz bandwidth modes for Band n7; 10, 15, 20, 30, 40, 50, 60, 80, 90 and 100 MHz bandwidth modes for Bands n41, n77 and n78.
This device supports SA modes for 5G NR technology.
Certification for 3GPP 5G NR bands n77 and n78 operations is limited to 3.45GHz segment under 27.5(o) and 3.7 GHz segment under 27.5(m).
1 2 3 4 5
Output power listed is average conducted.
This device supports 802.11a, 802.11n, 802..11ac and 802.11ax with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.
SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission use conditions is 0.66 W/kg, 0.57 W/kg, 0.57 W/kg and 1.34 W/kg, respectively.
1 2 3 4 5
Output Power listed is peak conducted.
This device supports 802.11b, 802.11g, 802.11n and 802.11ax with a 20 MHz and 40 MHz bandwidth mode.
SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission use conditions is 0.15 W/kg, 0.18 W/kg, 0.18 W/kg and 0.24 W/kg, respectively.
1 2 3 4 5
Output Power listed is peak conducted.
1 2 3 4 5
Is there an equipment authorization waiver associated with this application?
No
1 2 3 4 5
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC
